OEM Chevrolet Classic Coolant Reservoir

Chevrolet Classic Coolant Reservoir Parts Questions & Experts Answers

• Reservoir Tank
  19332882
  Q: How to replace the coolant reservoir on Chevrolet Classic?

  A: Start by supporting the vehicle while raising it then drain the coolant system before lowering the vehicle. Disconnect the low coolant sensor electrical connector before removing the low coolant sensor electrical harness from its retainer. You should use hose clamp pliers (J 38185) to move the Coolant Reservoir outlet hose clamp from its position on the Coolant Reservoir before removing the Coolant Reservoir outlet hose. You must use the hose clamp pliers (J 38185) to reposition the Coolant Reservoir outlet hose clamp. The same hose clamp removal step applies for the radiator vent hose using the hose clamp pliers (J 38185). First disconnect the Coolant Reservoir mounting bolt then remove the Coolant Reservoir from its position. After positioning the Coolant Reservoir in place install its mounting bolt with a torque of 10 nm (89 inch lbs.). Use hose clamp pliers (J 38185) to reinstall the radiator vent hose on the Coolant Reservoir while getting the hose clamp back into position. The hose clamp pliers (J 38185) helps position both the engine vent hose clamp and the radiator vent hose clamp. Use hose clamp pliers (J 38185) to relocate both the Coolant Reservoir outlet hose clamp. Then connect the low coolant sensor electrical connector to its retainer before reconnecting it to the electrical connector and filling the cooling system at the radiator Coolant Reservoir.