How to replace the fuel tank module on the right side on Chevrolet Corvette?

Begin the right Fuel Tank module replacement process by disconnecting the negative Battery Cable and removing the right Fuel Tank yet placing it on a suitable work station. Start the replacement by disconnecting the evap purge line from the Fuel Pump module and then disconnecting the Fuel Pump module harness connector and the Fuel Tank pressure sensor harness connector. The Fuel Pump module replacement process requires users to remove the ftp sensor. The jet line insert connector needs removal from the crossover tube which leads into the Fuel Tank opening. The Fuel Pump module possesses spring action which causes it to rise upward after unscrewing the locking ring. The fuel sender lock ring tool (J39765-A) helps users remove the Fuel Pump module locking ring so they can pull out the module from the Fuel Tank by maintaining connection of the jet lines to protect the fuel sender float arm. The jet line quick-connect connectors need removal from the Fuel Pump module while noting their positions ahead of reconnection. Additionally, extract the Fuel Pump module o-ring from the tank opening. Remove the jet line insert through the crossover tube which leads to the Fuel Tank opening. Before installation of new components check the jet line insert for damage and replace if needed followed by inserting a new Fuel Pump module o-ring to the Fuel Tank opening. Pull the connectors to verify their proper latching before pulling the quick-connectors up to the pump module opening where they should reconnect as explained before. After placing the pump module into the Fuel Tank avoid damaging the float arm continue by aligning and compressing the Fuel Pump module when installing the lock ring. The fuel sender lock ring tool (J39765-A) must be used to secure the Fuel Pump module lock ring completely. A dmm shows that the Fuel Pump module resistance checks should display 250 ohms when the tank is full and 40 ohms when it is empty after turning the tank upside down. Complete the jet line insert connector attachment by pulling it out until it meets specifications and attach it to the crossover tube at the Fuel Tank opening. You need to install the ftp sensor first before connecting its harness connector followed by the Fuel Pump module harness connector and lastly attaching the evap purge line from the Fuel Pump module before setting the right Fuel Tank.

OEM Chevrolet Corvette Fuel Tank

Gas Tank

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 Fuel Tanks found

View related parts
Chevrolet Corvette Fuel Tank, Driver Side Part Number: 84219478
$883.59 MSRP: $1326.71
You Save: $443.12 (34%)
ADD TO CART
Product Specifications
- Other Name: Tank, Fuel
- Position: Driver Side
- Replaced by: 87850537
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2019 Chevrolet Corvette | Grand Sport, Stingray, Z06, ZR1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Fuel Tank, Passenger Side Part Number: 85162328
$695.80 MSRP: $1044.77
You Save: $348.97 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Tank, Fuel
- Position: Passenger Side
- Replaces: 84779337
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020-2024 Chevrolet Corvette | E-Ray, Stingray, Z06 | 8 Cyl 5.5 L GAS, 8 Cyl 6.2 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Fuel Tank, Driver Side Part Number: 84843975
$680.26 MSRP: $1021.42
You Save: $341.16 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Tank, Fuel
- Position: Driver Side
- Replaces: 84779335
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020-2024 Chevrolet Corvette | E-Ray, Stingray, Z06 | 8 Cyl 5.5 L GAS, 8 Cyl 6.2 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Fuel Tank, Passenger Side Part Number: 22815188
$270.49 MSRP: $404.31
You Save: $133.82 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Tank, Fuel
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2019 Chevrolet Corvette | Grand Sport, Stingray, Z06, ZR1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Fuel Tank, Passenger Side Part Number: 25899602
Product Specifications
- Other Name: Tank, Fuel
- Position: Passenger Side
- Replaces: 10337582, 15141622
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2013 Chevrolet Corvette | 427, 427 Limited Edition Z06, 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
Chevrolet Corvette Fuel Tank Part Number: 14048936
Product Specifications
- Other Name: Tank, Fuel
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1996 Chevrolet Corvette | 35th Anniversary Edition, 40th Anniversary Edition, Base, Collector's Edition, Grand Sport, Indianapolis 500 Pace Car, ZR-1 | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Corvette Fuel Tank, Driver Side Part Number: 12459859
Product Specifications
- Other Name: Tank Kit, Fuel
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2002 Chevrolet Corvette | Base, Z06 | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Corvette Fuel Tank, Passenger Side Part Number: 12459858
Product Specifications
- Other Name: Tank Kit, Fuel
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2002 Chevrolet Corvette | Base, Z06 | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Corvette Fuel Tank, Driver Side Part Number: 12458241
Product Specifications
- Other Name: Tank Kit, Fuel
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999 Chevrolet Corvette | Base | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Corvette Fuel Tank, Passenger Side Part Number: 12458240
Product Specifications
- Other Name: Tank Kit, Fuel
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999 Chevrolet Corvette | Base | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Corvette Fuel Tank, Driver Side Part Number: 12458239
Product Specifications
- Other Name: Tank Kit, Fuel
- Position: Driver Side
- Replaces: 88880008
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-1998 Chevrolet Corvette | Base, Indianapolis 500 Pace Car | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Corvette Fuel Tank, Passenger Side Part Number: 12458238
Product Specifications
- Other Name: Tank Kit, Fuel
- Position: Passenger Side
- Replaces: 88880007
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-1998 Chevrolet Corvette | Base, Indianapolis 500 Pace Car | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Corvette Fuel Tank, Driver Side Part Number: 25899601
$804.74 MSRP: $1208.32
You Save: $403.58 (34%)
Product Specifications
- Other Name: Tank, Fuel
- Position: Driver Side
- Replaces: 10362744, 15141598
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2013 Chevrolet Corvette | 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS

Chevrolet Corvette Fuel Tank

Want to cut long-term maintenance and repair costs? Choose OEM Fuel Tank. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Corvette parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Corvette Fuel Tank includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Fuel Tank in Chevrolet Corvette automobiles is a chassis part that safely keeps fuel and provides it to the engine. Traditionally fixed at the back part of the car, the tank is either metallic or plastic and may get damaged by any obstruction on the road. Corvette owners have also complained about the leaks in their cars concerning the model's gas tank, especially on top of the tank. Fuel tanks also exist in different forms and sizes with a small opening that contains a cap for the supply of fuel. While selecting the right replacement tank the aspect like compatibility, size and even durability of the tank should be considered in order to boost the efficiency and suitability with the car.

Chevrolet Corvette Fuel Tank Parts Questions & Experts Answers

Fuel Tank, Passenger Side
25899602
Q: How to replace the fuel tank module on the right side on Chevrolet Corvette?
A:
Begin the right Fuel Tank module replacement process by disconnecting the negative Battery Cable and removing the right Fuel Tank yet placing it on a suitable work station. Start the replacement by disconnecting the evap purge line from the Fuel Pump module and then disconnecting the Fuel Pump module harness connector and the Fuel Tank pressure sensor harness connector. The Fuel Pump module replacement process requires users to remove the ftp sensor. The jet line insert connector needs removal from the crossover tube which leads into the Fuel Tank opening. The Fuel Pump module possesses spring action which causes it to rise upward after unscrewing the locking ring. The fuel sender lock ring tool (J39765-A) helps users remove the Fuel Pump module locking ring so they can pull out the module from the Fuel Tank by maintaining connection of the jet lines to protect the fuel sender float arm. The jet line quick-connect connectors need removal from the Fuel Pump module while noting their positions ahead of reconnection. Additionally, extract the Fuel Pump module o-ring from the tank opening. Remove the jet line insert through the crossover tube which leads to the Fuel Tank opening. Before installation of new components check the jet line insert for damage and replace if needed followed by inserting a new Fuel Pump module o-ring to the Fuel Tank opening. Pull the connectors to verify their proper latching before pulling the quick-connectors up to the pump module opening where they should reconnect as explained before. After placing the pump module into the Fuel Tank avoid damaging the float arm continue by aligning and compressing the Fuel Pump module when installing the lock ring. The fuel sender lock ring tool (J39765-A) must be used to secure the Fuel Pump module lock ring completely. A dmm shows that the Fuel Pump module resistance checks should display 250 ohms when the tank is full and 40 ohms when it is empty after turning the tank upside down. Complete the jet line insert connector attachment by pulling it out until it meets specifications and attach it to the crossover tube at the Fuel Tank opening. You need to install the ftp sensor first before connecting its harness connector followed by the Fuel Pump module harness connector and lastly attaching the evap purge line from the Fuel Pump module before setting the right Fuel Tank.