Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM Chevrolet K3500 Clutch Slave Cylinder

  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Clutch Slave Cylinder found

  • Chevy K3500 Clutch Slave Cylinder - 24264182
    Chevy K3500 Clutch Slave Cylinder Diagram - 24264182
    View related parts

    Chevrolet K3500 Slave Cylinder

    Part Number: 24264182
    $173.66 MSRP: $273.26
    You Save: $99.60 (37%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Cylinder Assembly, Clutch Actuator; Clutch Slave Cylinder; Cylinder, Clutch Hydraulic Release Slave/Actuator
    • Replaces: 15018532, 15727249, 15998501, 12565145, 15046288, 15742944
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    Fits the following Vehicles:
    • 1997-2000 Chevrolet K3500 | Base, Cheyenne, LS, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS

Chevrolet K3500 Clutch Slave Cylinder

Our website offers an extensive catalog of genuine Chevrolet K3500 Clutch Slave Cylinder at unbeatable prices. Every OEM Chevrolet K3500 Clutch Slave Cylinder comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet K3500 Clutch Slave Cylinder Parts Questions & Experts Answers

  • Chevrolet K3500 Clutch Slave Cylinder - 24264182 Slave Cylinder Slave Cylinder
    24264182
    Q: How to service and repair the Clutch Slave Cylinder on Chevrolet K3500?
    A: You must remove the transmission to work on and repair the Clutch Slave Cylinder. Following this step, pull off the bolts attached to the concentric slave cylinder and extract the slave cylinder from the transmission input shaft. After, pull the bearing out of the slave cylinder. Installing the bearing onto the slave cylinder should be the first step, then attach the slave cylinder to the transmission input shaft, so that the coupling and bleed screw match the ports on the transmission. Following the fastener notice is necessary in service precautions. After that, place and tighten the two bolts that connect the concentric slave cylinder to the shaft on the clutch housing to 8 nm (71 inch lbs.). The last step is to replace the transmission.

Related Chevrolet K3500 Parts

Browse Chevrolet K3500 Clutch Slave Cylinder by Years

+
2000 1999 1998 1997