Other Name: Valve, Emission Control System; EGR Vacuum Solenoid; Valve, Emission Control System(ECM Components); Valve, Emission Control System(EGR Control)
Replaces: 17113301, 17094028, 17113713
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1994 Chevrolet K3500 | Base, Cheyenne, Silverado | 8 Cyl 7.4 L GAS
Other Name: Solenoid, Emission Control System; EGR Vacuum Solenoid; EGR Valve; EGR Solenoid; Control Solenoid; Valve, Emission Control System (ECM Components); EGR Control Valves.
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1991-1996 Chevrolet K3500 | Base, Cheyenne, Scottsdale, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
Other Name: Valve Assembly-EGR Valve & Exhaust Pressure; EGR Vacuum Solenoid; Valve, Emission Control System(EGR Valves); Valve, Emission Control System
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1991-1993 Chevrolet K3500 | Cheyenne, Scottsdale, Silverado | 8 Cyl 6.2 L DIESEL
Other Name: Valve Assembly-EGR; EGR Vacuum Solenoid; Valve, Emission Control System (ECM Components, EGR Control)
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1988-1995 Chevrolet K3500 | Base, Cheyenne, Scottsdale, Silverado | 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL
Chevrolet K3500 EGR Valve
Our website offers an extensive catalog of genuine Chevrolet K3500 EGR Valve at unbeatable prices. Every OEM Chevrolet K3500 EGR Valve comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Chevrolet K3500 EGR Valve Parts Questions & Experts Answers
Q: How to service the EGR Valve without disassembling it on Chevrolet K3500?
A: The service procedure requires not dissassembling the linear exhaust gas recirculation (EGR) valve due to its assembly-only servicing requirements. Before beginning removal process maintain a record of the EGR Valve orientation because it should not face in a 180-degree direction. First disconnect the negative Battery Cable then disconnect the EGR Valve harness connector before performing any service operations since soaking the linear EGR Valve in solvent cleaners may result in damage. Start by removing the flange gasket followed by the linear EGR Valve itself before proceeding to disconnect the valve to flange attaching bolts. Prepare the linear EGR Valve gasket surface before adding it into place for installation. Install a new flange gasket followed by the linear EGR Valve into position before torquing the valve to flange bolts at 10 n.m (89 lb in.) each and finally tightening them to 25 n.m (18 lb ft) each. The last step involves harness reconnection of the EGR Valve and Battery Cable negation.