Other Name: Plate, Front Side Door Name; Plate Assembly, Cab And Load Carrier Outer Side Decoration; Plate Assembly, Side Panel Wheel Opening; Plate, Body Rear
Position: Front
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1992-1994 Chevrolet K3500 | Base, Cheyenne, Scottsdale, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
Other Name: Plate, Cab And Load Carrier Outer Side Decoration; Plate, Side Panel Wheel Opening; Body Side Lower Front; Fuel Door & Body Side; Pickup Box Side Lower
Position: Outer
Replaces: 15646974, 15705586
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1988-2000 Chevrolet K3500 | Base, Cheyenne, LS, Scottsdale, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
Other Name: Plate, Front Side Door; Plate Assembly, Cab & Load Carrier Decoration; Side Panel Wheel Opening; Pickup Box Side
Position: Front
Replaces: 15551238
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1988-2000 Chevrolet K3500 | Base, Cheyenne, LS, Scottsdale, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
Chevrolet K3500 Emblem
Our website offers an extensive catalog of genuine Chevrolet K3500 Emblem at unbeatable prices. Every OEM Chevrolet K3500 Emblem comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Chevrolet K3500 Emblem Parts Questions & Experts Answers
Q: How to replace the emblem or nameplate while ensuring proper adhesion on Chevrolet K3500?
A: Clear the work space from dust and dirt before working with the adhesive backing. Use a cleaning solution like flash naphtha or an isopropyl alcohol and water mix to wipe the marking area before making it completely dry. Control area temperatures at 27-41°C (80-105°F) while warming up the body and keep the item to mount at 29-32°C (80-90°F) using heat carefully. Ready the surface for application when you take off the protection. Place appliques against the body using 3-10 lb of pressure followed by 0.12 mm (0.005 in) thick clear plastic taped over the item to wet about 75 percent of the adhesive under high pressure. To mount emblems properly, apply them at the center section while using foam padding to shield them from damage.