How to replace the liftgate hinge on Chevrolet Metro?

Start by lifting the liftgate with proper support to work on the replacement. You can open the weather stripping part to reach the hinge retaining nut and detach it. Remove the 2 liftgate bolts holding it to the hinge assembly. Rephrase this step by removing the other hinge from the vehicle. Set the hinge in its position on the liftgate then attach it with the two bolts but leave the nuts loose. Use a wrench to tighten both the lifting nut between hinge and vehicle plus the two bolts that connect liftgate to hinge until they achieve 45 nm (33 lb ft) torque settings. After putting the hinge bolts at 45 nm (33 lb ft) push the Weather Strip into position and engage the liftgate.

OEM Chevrolet Metro Liftgate Hinge

Luggage Compartment Door Hinge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Liftgate Hinges found

View related parts
Chevrolet Metro Hinge, Rear
Part Number: 30013622
Product Specifications
- Other Name: Hinge, Rear Compartment Lid And End Gate
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2000 Chevrolet Metro | Base, LSi | 3 Cyl 1.0 L GAS, 4 Cyl 1.3 L GAS
View related parts
Chevrolet Metro Hinge, Rear
Part Number: 30013555
Product Specifications
- Other Name: Hinge, Rear Compartment Lid And End Gate
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2001 Chevrolet Metro | Base, LSi | 3 Cyl 1.0 L GAS, 4 Cyl 1.3 L GAS

Chevrolet Metro Liftgate Hinge

Our website offers an extensive catalog of genuine Chevrolet Metro Liftgate Hinge at unbeatable prices. Every OEM Chevrolet Metro Liftgate Hinge comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Metro Liftgate Hinge Parts Questions & Experts Answers

Hinge, Rear
30013555
Q: How to replace the liftgate hinge on Chevrolet Metro?
A: Start by lifting the liftgate with proper support to work on the replacement. You can open the Weather Stripping part to reach the hinge retaining nut and detach it. Remove the 2 liftgate bolts holding it to the hinge assembly. Rephrase this step by removing the other hinge from the vehicle. Set the hinge in its position on the liftgate then attach it with the two bolts but leave the nuts loose. Use a wrench to tighten both the lifting nut between hinge and vehicle plus the two bolts that connect liftgate to hinge until they achieve 45 nm (33 lb ft) torque settings. After putting the hinge bolts at 45 nm (33 lb ft) push the Weather Strip into position and engage the liftgate.