How to replace the Front Cross-Member on a 4WD on Chevrolet S10?

Firstly, elevate and support the vehicle in the right way to change the transmission support on a 4wd vehicle. Hold the transmission to use a transmission jack and disconnect the transmission wiring harness from the transmission support if necessary. Unbolt the transmission mount to the transmission support stud nuts, and if required, remove the catalytic converter hanger bracket from the transmission support. After that, take the nuts and bolts, as well as the transmission support from the frame to the pickups and utilities, with bravada and zr 2 models also infested by this pest, before the transmission support itself can be removed. For installation, start by locating the transmission support and to adhere to the fastener notice in service precautions. Mount the transmission support to the nuts and bolts for the frame for the zr2s, where they tighten at 54 n.m (40 lb ft), then replicate this for the bravadas and pickups and utilities, in which they tighten at 54 n.m (40 lb ft). Reattach it to the transmission support, mounting bolts with 17 n.m (13 lb ft). If applicable. Next, install the transmission mount to the transmission support nuts and tighten it up to 57 n.m (42 lb ft), if any transmission wiring harness had been disconnected, you would need to reconnect it at this time. Finally lift of the transmission jack and let the vehicle down.

OEM Chevrolet S10 Front Cross-Member

Front Engine Cross Member

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 Front Cross-Members found

View related parts
Chevrolet S10 Transmission Support Part Number: 15148807
$93.03 MSRP: $145.71
You Save: $52.68 (37%)
Product Specifications
- Other Name: Crossmember, Transmission Mounting; Transfer Case Mount; Trans Crossmember; Transmission Mount
- Replaces: 15974875
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-2004 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Transmission Support Part Number: 15999937
Product Specifications
- Other Name: Crossmember, Transmission Mounting
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1995 Chevrolet S10 | Base, LS, SS, ZR2 | 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Transmission Support Part Number: 15968039
Product Specifications
- Other Name: Crossmember; Crossmember, Transmission Mounting
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-1997 Chevrolet S10 | Base, LS, SS, ZR2 | 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Transmission Support Part Number: 15720829
Product Specifications
- Other Name: Crossmember; Crossmember, Transmission Mounting
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2003 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2, ZR5 | 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Transmission Support Part Number: 15717737
Product Specifications
- Other Name: Crossmember, Transmission Mounting
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1997 Chevrolet S10 | Base, LS | 4 Cyl 2.2 L GAS
View related parts
Chevrolet S10 Transmission Support Part Number: 15675036
Product Specifications
- Other Name: Support, Transmission Mounting; Transfer Case Mount; Crossmember, Transmission Mounting
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-1993 Chevrolet S10 | Baja, Base, Durango, EL, Sport, Tahoe | 4 Cyl 1.9 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Frame Assembly Support Part Number: 15597450
Product Specifications
- Other Name: Crossmember, Intermediate (Transmission Support Cross Member); Crossmember; Intermediate Transmission Support Cross Member
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1993, 1985-1988 Chevrolet S10 | Baja, Base, EL, Sport, Tahoe | 4 Cyl 1.9 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Frame Assembly Support Part Number: 15597449
Product Specifications
- Other Name: Crossmember, Intermediate (Transmission Support Cross Member); Crossmember; Intermediate Transmission Support Cross Member
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-1993 Chevrolet S10 | Baja, Base, EL, Sport, Tahoe | 4 Cyl 1.9 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Transmission Support Part Number: 15148805
Product Specifications
- Other Name: Crossmember; Crossmember, Transmission Mounting
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2003 Chevrolet S10 | Base, LS, Xtreme | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS
View related parts
Chevrolet S10 Transmission Support Part Number: 15148801
Product Specifications
- Other Name: Crossmember, Transmission Support; Crossmember, Transmission Mounting
- Replaces: 15968038
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2003 Chevrolet S10 | Base, LS, Xtreme | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS
View related parts
Chevrolet S10 Frame Assembly Support Part Number: 14062940
Product Specifications
- Other Name: Crossmember, Intermediate (Transmission Support Cross Member); Crossmember; Intermediate Transmission Support Cross Member
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-1993 Chevrolet S10 | Baja, Base, Durango, EL, Tahoe | 4 Cyl 1.9 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Transmission Support Part Number: 14041697
Product Specifications
- Other Name: Crossmember, Trans Support; Support; Crossmember, Transmission Mounting
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-1993 Chevrolet S10 | Baja, Base, Durango, EL, Sport, Tahoe | 4 Cyl 1.9 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Crossmember Part Number: 12543936
Product Specifications
- Other Name: Member, Propeller Shaft Cross; Crossmember, Intermediate(Transmission Support Cross Member)
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994 Chevrolet S10 | Base, LS, SS, ZR2 | 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS

Chevrolet S10 Front Cross-Member

Want to cut long-term maintenance and repair costs? Choose OEM Front Cross-Member. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet S10 parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet S10 Front Cross-Member includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Chevrolet S10 Front Cross-Member functions as an essential structural component which substantially enhances Chevrolet S10 whole lineup reliability and performance standards. Vehicle stability along with handling benefits from the Front Cross-Member which supports engine and transmission structure for safe driving conditions. The steel-made component uses durable steel for construction since it requires secure bolting underneath the Chevrolet S10 to achieve necessary suspension alignment. Several types of Front Cross-Members have been applied across different S10 generations but the K-member stands out because of its formed design which delivers superior strength. The particular shape meets requirements of vehicles which employ longitudinally-positioned motors. The Chevrolet S10 achieves superior structural strength alongside improved safety measures because of this particular feature. The Front Cross-Member demonstrates market importance because it functions across multiple automobile models despite various engine and transmission types. The Chevrolet car Front Cross-Member promotes efficiency and stability which positions it as an essential truck part contributing to its enduring popularity. The the automaker model includes this component because it maintains high reliability standards and delivers essential safety features to create an essential part of the whole system.

Chevrolet S10 Front Cross-Member Parts and Q&A

Transmission Support
15148807
Q: How to replace the Front Cross-Member on a 4WD on Chevrolet S10?
A:
Firstly, elevate and support the vehicle in the right way to change the transmission support on a 4wd vehicle. Hold the transmission to use a transmission jack and disconnect the transmission wiring harness from the transmission support if necessary. Unbolt the transmission mount to the transmission support stud nuts, and if required, remove the catalytic converter hanger bracket from the transmission support. After that, take the nuts and bolts, as well as the transmission support from the frame to the pickups and utilities, with bravada and zr 2 models also infested by this pest, before the transmission support itself can be removed. For installation, start by locating the transmission support and to adhere to the fastener notice in service precautions. Mount the transmission support to the nuts and bolts for the frame for the zr2s, where they tighten at 54 n.m (40 lb ft), then replicate this for the bravadas and pickups and utilities, in which they tighten at 54 n.m (40 lb ft). Reattach it to the transmission support, mounting bolts with 17 n.m (13 lb ft). If applicable. Next, install the transmission mount to the transmission support nuts and tighten it up to 57 n.m (42 lb ft), if any transmission wiring harness had been disconnected, you would need to reconnect it at this time. Finally lift of the transmission jack and let the vehicle down.