Other Name: Actuator Kit, Door Lock; Door Lock Actuator; Lock Actuator; Actuator; Actuator Kit, Door Electric And Vacuum Locks; Actuator Kit, Door And End Gate Electrical
Other Name: Lock, Rear Side Door; Door Latch Assembly; Door Lock; Lock; Lock, Door Lock
Position: Rear Driver Side
Replaces: 15075562
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2001-2004 Chevrolet S10 | Base, LS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
| Page 1 of 2 |Next >
1-20 of 39 Results
Chevrolet S10 Door Lock Actuator
Our website offers an extensive catalog of genuine Chevrolet S10 Door Lock Actuator at unbeatable prices. Every OEM Chevrolet S10 Door Lock Actuator comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Chevrolet S10 Door Lock Actuator Parts Questions & Experts Answers
Q: How to replace the power door lock actuator on Chevrolet S10?
A: The power Door Lock Actuator replacement starts with removing the door trim panel and moving to the water deflector and then to the Door Latch Assembly. You need to remove two screws which keep the lock actuator fastened to the latch. After lifting and rotating the actuator away from the latch you can disconnect the rubber Bumper from the latch before removing the actuator from the latch. Start by putting the rubber Bumper on the latch followed by actuator rotation toward the latch to confirm complete rubber Bumper engagement. The successful installation requires first tooth alignment between the actuator gear and the latch gear. Firmly attach the actuator above the latch using two screws that should be tightened to 0.75 n.m (6 lb in) as per the provided fastener notice. The installation process requires users to return the latch to the door and then replace the water deflector followed by the door trim panel.