Make sure this part fits

GM 15768705
Lock, Rear

1996-2003 GM

Customer Questions & Expert Answers (10)
GM 15768705 Lock, Rear
GM 15768705 Lock, Rear
  • Part Description
    Latch Assembly-Rear Side Door *Marked Print; Door Latch Assembly; Door Lock
  • Position
    Rear
  • Replaces
    15985536, 15000191
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    1996-2003 Chevrolet BlazerBase, LS, LT, Trailblazer, Xtreme, ZR26 Cyl 4.3 L GAS
    1996-2003 Chevrolet S10Base, LS, Xtreme, ZR24 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    1996-2001 GMC JimmyBase, Diamond Edition, Envoy, SL, SLE, SLS, SLT6 Cyl 4.3 L GAS
    1996-2003 GMC SonomaSL, SLE, SLS4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    1996-2001 Oldsmobile BravadaBase6 Cyl 4.3 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15768705 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15768705 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you detach the lock actuator from the latch for the 2002 Chevrolet S10? Posted by Customer
    A:
    Take out the 2 screws that secure the lock actuator to the latch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be done after aligning the actuator for the 2002 Chevrolet S10? Posted by Customer
    A:
    Rotate the actuator toward the latch to fully engage the rubber bumper, then position the actuator at the top of the latch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the first step to replace the power door lock actuator for the 2003 Chevrolet S10? Posted by Customer
    A:
    Begin by removing the door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    How do you install the new latch assembly for the 2002 Chevrolet S10? Posted by Customer
    A:
    Attach the lock actuator to the latch, then position the latch assembly back into the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What are the final steps after reinstalling the rods for the 2000 GMC Jimmy? Posted by Customer
    A:
    Reinstall the water deflector and door trim panel, and reconnect the battery negative cable.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the installation process for the lock assembly for the 2001 GMC Jimmy? Posted by Customer
    A:
    Position the lock assembly back into the door and secure it with fasteners, tightening them to 9 N.m (80 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the next step after removing the screws for the 2003 GMC Sonoma? Posted by Customer
    A:
    Lift and rotate the actuator to disengage the rubber bumper from the latch, then remove the actuator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What rods need to be detached from the lock assembly for the 2000 GMC Jimmy? Posted by Customer
    A:
    Detach the inside door lock rod and inside door handle rod, followed by the outside door lock rod and outside door handle rod.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be removed from the latch for the 2003 GMC Sonoma? Posted by Customer
    A:
    Remove the lock actuator from the latch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Lock, Rear 15768705 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15768705 Lock, Rear is available in the market under the name GM Door Lock, Door Lock Actuator, Door Latch Assembly. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15768705 Lock, Rear fits certain Chevrolet S10, Blazer models, as well as GMC Sonoma, Jimmy. Additionally, it is compatible with Oldsmobile Bravada models.
The original GM component designated by manufacturer part number 15768705 maintains top performance when functioning as the Latch Assembly-Rear Side Door *Marked Print; Door Latch Assembly; Door Lock unit at its Rear. The component 15768705 is constructed from durable material and its dimensions span 4.2 x 4.1 x 1.6 inches while weighing 0.90 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Latch; Latch, Door Lock. The part 15768705 has available replacement options 15985536, 15000191. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.