How to replace the door moldings on the side door lock pillar on Chevrolet S10?

Replacing the side door lock pillar garnish molding requires front rear door sill trim plate removal along with upper and lower front seat belt anchor bolts. The procedure begins with removing the front side door lock pillar garnish molding from the vehicle after threadng the seat belt through it. Reinstall the front side door lock pillar garnish molding while keeping the seat belt leading through it. Service Precautions Fastener Notice requires strict compliance. Reinstall the upper and lower front seat belt anchor bolts at 70 N.m (52 lb ft) torque and secure the front and rear door sill trim plates.

OEM Chevrolet S10 Door Moldings

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

30 Door Moldings found

View related parts
Chevrolet S10 Body Side Molding, Rear Driver Side Part Number: 15712059
Product Specifications
- Other Name: Molding, Rear Quarter Panel; Door Moldings; Molding, Cab And Load Carrier Outer Side Decoration; Molding, Fuel Door & Body Side
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2003 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Body Side Molding, Rear Part Number: 15630011
Product Specifications
- Other Name: Molding, Rear Quarter Panel; Molding, Cab And Load Carrier Outer Side Decoration
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1993 Chevrolet S10 | Baja, Base, EL, Tahoe | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Rear Molding, Outer Driver Side Part Number: 15669047
Product Specifications
- Other Name: Molding, Cab And Load Carrier Outer Side Decoration
- Position: Outer Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1995 Chevrolet S10 | Base, LS | 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Edge Guard Part Number: 997461
Product Specifications
- Other Name: Molding Package, Door Edge, Stainless; Door Moldings
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1989-1990 Chevrolet S10 | Base, Durango, Sport, Tahoe | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Body Side Molding, Rear Passenger Side Part Number: 15712060
Product Specifications
- Other Name: Molding, Rear Quarter Panel; Door Moldings; Molding, Cab And Load Carrier Outer Side Decoration; Molding, Fuel Door & Body Side
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2003 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Rear Molding, Outer Passenger Side Part Number: 15718382
Product Specifications
- Other Name: Molding, Cab And Load Carrier Outer Side Decoration
- Position: Outer Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2000 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Front Molding, Outer Passenger Side Part Number: 15630020
Product Specifications
- Other Name: Molding, Cab And Load Carrier Outer Side Decoration; Molding
- Position: Outer Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1993 Chevrolet S10 | Baja, Base, EL, Tahoe | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Rear Molding, Outer Driver Side Part Number: 15718381
Product Specifications
- Other Name: Molding, Cab And Load Carrier Outer Side Decoration
- Position: Outer Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2000 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Body Side Molding, Outer Driver Side Part Number: 15023271
Product Specifications
- Other Name: Molding, Cab And Load Carrier Outer Side Decoration; Door Moldings
- Position: Outer Driver Side
- Replaces: 15669037
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1997 Chevrolet S10 | Base, LS, ZR2 | 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Rear Molding, Outer Driver Side Part Number: 15659177
Product Specifications
- Other Name: Molding, Cab And Load Carrier Outer Side Decoration
- Position: Outer Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1993 Chevrolet S10 | Baja, Base, EL, Tahoe | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Side Molding Part Number: 12300650
Product Specifications
- Other Name: Molding; Door Moldings; Front Molding; Molding, Cab And Load Carrier Outer Side Decoration; Molding, Front Fender And Body Ornamentation
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-1990 Chevrolet S10 | Base, Durango, Sport, Tahoe | 4 Cyl 1.9 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Body Side Molding, Outer Passenger Side Part Number: 15630004
Product Specifications
- Other Name: Molding, Cab And Load Carrier Outer Side Decoration; Door Moldings; Side Molding
- Position: Outer Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1993 Chevrolet S10 | Baja, Base, EL, Tahoe | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Rear Molding, Outer Passenger Side Part Number: 15023282
Product Specifications
- Other Name: Molding, Cab And Load Carrier Outer Side Decoration
- Position: Outer Passenger Side
- Replaces: 15669046
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1999 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2 | 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Body Side Molding, Front Lower Driver Side Part Number: 15712057
Product Specifications
- Other Name: Molding, Front Side Door Lower; Door Moldings; Molding, Cab And Load Carrier Outer Side Decoration
- Position: Front Lower Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2003 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Rear Molding, Outer Driver Side Part Number: 15023281
Product Specifications
- Other Name: Molding, Cab And Load Carrier Outer Side Decoration
- Position: Outer Driver Side
- Replaces: 15669045
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1999 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2 | 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Side Panel, Driver Side Part Number: 15668793
Product Specifications
- Other Name: Molding, Body Interior Trim
- Position: Driver Side
- Replaces: 15668799
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2002 Chevrolet S10 | Base, ZR5 | 4 Cyl 2.2 L FLEX, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Body Side Molding, Outer Driver Side Part Number: 15630003
Product Specifications
- Other Name: Molding, Cab And Load Carrier Outer Side Decoration; Door Moldings; Side Molding
- Position: Outer Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1993 Chevrolet S10 | Baja, Base, EL, Tahoe | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Body Side Molding, Front Lower Driver Side Part Number: 15023273
Product Specifications
- Other Name: Molding, Front Side Door Lower; Door Moldings; Molding, Cab And Load Carrier Outer Side Decoration
- Position: Front Lower Driver Side
- Replaces: 15669033
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1997 Chevrolet S10 | Base, LS, SS, ZR2 | 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Body Side Molding, Front Lower Passenger Side Part Number: 15023274
Product Specifications
- Other Name: Molding, Front Side Door Lower; Door Moldings; Molding, Cab And Load Carrier Outer Side Decoration
- Position: Front Lower Passenger Side
- Replaces: 15669034
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1997 Chevrolet S10 | Base, LS, SS, ZR2 | 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Body Side Molding, Front Lower Passenger Side Part Number: 15712058
Product Specifications
- Other Name: Molding, Front Side Door Lower; Door Moldings; Molding, Cab And Load Carrier Outer Side Decoration
- Position: Front Lower Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2003 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS

| Page 1 of 2 |Next >

1-20 of 30 Results

Chevrolet S10 Door Moldings

Want to cut long-term maintenance and repair costs? Choose OEM Door Moldings. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet S10 parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet S10 Door Moldings includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Door Moldings are promising and well known parts of Chevrolet S10 which are popular for their performance and durability. These door moldings have functions of beautification of the car and also offer protection to the sheet metal from impact by other objects such as rocks. Made of tough materials including plastic, the steel, or chrome, the Door Moldings will last long and offer proper protection to the car body. Because the late model and classic models of the S10 are easily applicable, these are among the premier upgrades for any Chevrolet S10. Door moldings are not only among the components that beautify the Chevrolet S10 but also among those that contribute most to the increase of efficiency and security by preventing potential damage from being inflicted to the car's door while being opened and by adding the touches of contour at the base of the windows. In addition to the general protective facet of the car appearance, there are more specific features, for example, rocker panel moldings and standalone lower door moldings of Door Moldings that make them exceptional in the automotive industry. As a result of designs and uniqueness of design, the Door Moldings satisfy the functional look of the Chevrolet S10, providing it with quality and performance, hence not relinquishing its pride of place among truck lovers.

Chevrolet S10 Door Moldings Parts and Q&A

Body Side Molding, Rear Lower Passenger Side
15712062
Q: How to replace the door moldings on the side door lock pillar on Chevrolet S10?
A:
Replacing the side door lock pillar garnish molding requires front rear door sill trim plate removal along with upper and lower front seat belt anchor bolts. The procedure begins with removing the front side door lock pillar garnish molding from the vehicle after threadng the seat belt through it. Reinstall the front side door lock pillar garnish molding while keeping the seat belt leading through it. Service Precautions Fastener Notice requires strict compliance. Reinstall the upper and lower front seat belt anchor bolts at 70 N.m (52 lb ft) torque and secure the front and rear door sill trim plates.