How to Service and Repair the Upper Front Door Striker on a Chevrolet S10?

You can start replacing the upper front door striker by taking out the rear side door upper latch striker cover through the roof panel retainers that a flat-bladed tool can release. Proceed to uninstall the bolts securing the striker onto the roof panel until the striker with its shim(s) easily separate from the roof panel. You must reinstall the striker and shim(s) on the roof panel while following the Service Precautions related to Fastener Notice. Use the bolts to secure the striker onto the roof panel after which you should set the bolt tension for a proper fit while performing a self-aligning door check of the striker position and verifying door alignment. Follow the Fastener Notice in Service Precautions for positioning the striker before securing it with 10 N.m (89 lb in) bolts to the roof panel.

How to replace the front door striker on Chevrolet S10?

The front Door Striker replacement process demands initial removal of the front door lower striker bolt as well as the rear door lower striker bolt. The upper bolts need just a bit of loosening to pivot the striker together with its spacer toward the bottom hole where you should install and tighten the lower bolt as needed for plate support. The next step includes removal of the upper striker bolt followed by the spacer (if equipped) as well as the striker itself. The first step for installation begins with attaching the striker along with the spacer (if present) and finally adding the upper striker bolt. The installer should rotate the bottom striker bolt to match the upper threaded position before removing it if the striker backing plate shifted position. The lower threaded hole of the striker backing plate should be aligned while installing both the front door lower striker bolt and then the rear lower striker bolt. To achieve correct door latch engagement you should adjust the Door Striker by loosening the bolts and tightening them to 22 n.m (16 lb ft).

OEM Chevrolet S10 Door Striker

Door Lock Striker

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Door Strikers found

View related parts
Chevrolet S10 Striker, Rear Part Number: 15985540
$7.34 MSRP: $10.92
You Save: $3.58 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Striker-Rear Side Door Latch; Striker, Door Lock Striker
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2003 Chevrolet S10 | Base, LS, Xtreme, ZR2 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Lock Striker, Front Part Number: 15013147
$23.44 MSRP: $34.89
You Save: $11.45 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Striker, Front Side Door Lock; Lock Cylinder Striker; Actuator Striker; Lock; Striker; Striker, Door Lock Striker
- Position: Front
- Replaces: 20151274
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-1994 Chevrolet S10 | Baja, Base, Durango, EL, LS, Sport, SS, Tahoe, ZR2 | 4 Cyl 1.9 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Frame Bushing, Rear Part Number: 14047335
$6.96 MSRP: $10.35
You Save: $3.39 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing, Back/Rear Window Glass Reveal; Hinge Bushing; Latch Kit, Latch, Side Door Window Glass, Body Side Rear Window, Striker, Door Lock Striker.
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-2003 Chevrolet S10 | Base, LS, Xtreme, ZR2 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Gate Striker Part Number: 15966638
Product Specifications
- Other Name: Striker, End Gate Lock; Striker
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1994 Chevrolet S10 | Base, EL, LS, SS, Tahoe, ZR2 | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Striker Part Number: 15765718
Product Specifications
- Other Name: Striker, Door Lock Striker
- Position: Rear
- Replaces: 15736896, 15645367
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2003 Chevrolet S10 | Base, LS, Xtreme, ZR2 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Striker, Driver Side Part Number: 15736655
Product Specifications
- Other Name: Striker, End Gate Lock
- Position: Driver Side
- Replaces: 15747900, 15660005
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-2004 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Striker, Passenger Side Part Number: 15660006
$11.92 MSRP: $17.74
You Save: $5.82 (33%)
Product Specifications
- Other Name: Striker, End Gate Lock
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-2004 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Striker Part Number: 21090040
$31.92 MSRP: $47.49
You Save: $15.57 (33%)
Product Specifications
- Other Name: Striker, Door Lock Striker; Striker, End Gate Lock
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-2004 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Window Striker Part Number: 12546794
Product Specifications
- Other Name: Striker, End Gate Lock; Striker
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2004 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Striker Part Number: 15648066
Product Specifications
- Other Name: Striker, Instrument Panel Compartment Door Lock And Console Compartment Door Lock; Striker, Instrument Panel Compartment
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1997 Chevrolet S10 | Base, LS, SS, ZR2 | 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Striker Part Number: 15590541
Product Specifications
- Other Name: Striker Assembly-Instrument Panel Compartment Door Lock; Striker, Instrument Panel Compartment
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1993 Chevrolet S10 | Baja, Base, EL, Tahoe | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Striker Plate Part Number: 14067298
Product Specifications
- Other Name: Striker, End Gate Lock; Striker
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-1993 Chevrolet S10 | Baja, Base, Durango, EL, Sport, Tahoe | 4 Cyl 1.9 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS

Chevrolet S10 Door Striker

Want to cut long-term maintenance and repair costs? Choose OEM Door Striker. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet S10 parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet S10 Door Striker includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Chevrolet S10 Door Striker functions as a critical element to increase reliability and performance output in all Chevrolet S10 vehicles. This U-shaped metal component verifies door closure and alignment precision because these functions are vital for safety together with overall efficiency. Repeated door usage will eventually cause the Door Striker to lose its proper alignment thereby creating intensive issues including door closures problems and unwelcome rattling sounds. A normal replacement procedure for a Door Striker ensures rapid improvement of door function which proves essential to vehicle maintenance. The Door Striker by Chevrolet S10 supports multiple models of the S10 compact pickup truck thus demonstrating broad compatibility across different generations of this vehicle line. The Door Striker emerges from zinc-coated materials to establish its function as both resilient and enduring. The Door Striker will operate optimally through regular maintenance such as cleaning and lubrication which extends its lifespan. The Chevrolet S10's outstanding reliability standard is strengthened by its high-quality Door Striker since this component plays a vital safety role in vehicle structure performance. The Chevrolet S10 Door Striker proves exceptional in automotive markets because of its reliable functionality combined with its durable design which offers essential benefits to model owners.

Chevrolet S10 Door Striker Parts and Q&A

Striker, Passenger Side
15660006
Q: How to Service and Repair the Upper Front Door Striker on a Chevrolet S10?
A:
You can start replacing the upper front door striker by taking out the rear side door upper latch striker cover through the roof panel retainers that a flat-bladed tool can release. Proceed to uninstall the bolts securing the striker onto the roof panel until the striker with its shim(s) easily separate from the roof panel. You must reinstall the striker and shim(s) on the roof panel while following the Service Precautions related to Fastener Notice. Use the bolts to secure the striker onto the roof panel after which you should set the bolt tension for a proper fit while performing a self-aligning door check of the striker position and verifying door alignment. Follow the Fastener Notice in Service Precautions for positioning the striker before securing it with 10 N.m (89 lb in) bolts to the roof panel.
Striker
21090040
Q: How to replace the front door striker on Chevrolet S10?
A:
The front Door Striker replacement process demands initial removal of the front door lower striker bolt as well as the rear door lower striker bolt. The upper bolts need just a bit of loosening to pivot the striker together with its spacer toward the bottom hole where you should install and tighten the lower bolt as needed for plate support. The next step includes removal of the upper striker bolt followed by the spacer (if equipped) as well as the striker itself. The first step for installation begins with attaching the striker along with the spacer (if present) and finally adding the upper striker bolt. The installer should rotate the bottom striker bolt to match the upper threaded position before removing it if the striker backing plate shifted position. The lower threaded hole of the striker backing plate should be aligned while installing both the front door lower striker bolt and then the rear lower striker bolt. To achieve correct door latch engagement you should adjust the Door Striker by loosening the bolts and tightening them to 22 n.m (16 lb ft).