Make sure this part fits

GM 15736966
Lock, Rear

1985-2003 GM

Customer Questions & Expert Answers (17)
GM 15736966 Lock, Rear
  • Part Description
    Latch Assembly-Rear Side Door; Door Latch Assembly; Door Lock
  • Position
    Rear
  • Replaces
    15724461, 15966626
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    1999-2000 Cadillac EscaladeBase8 Cyl 5.7 L GAS
    1985-1989 Chevrolet AstroBase, CL, CS, LT4 Cyl 2.5 L GAS, 6 Cyl 4.3 L GAS
    1996-1999, 1992-1994 Chevrolet BlazerBase, Cheyenne, LS, LT, Silverado, Silverado Sport, Trailblazer6 Cyl 4.3 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
    1991-1999 Chevrolet C1500454 SS, Base, Cheyenne, LS, Scottsdale, Silverado, WT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1992-1999 Chevrolet C1500 SuburbanBase, LS, LT, Silverado8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
    1991-2000 Chevrolet C2500Base, Cheyenne, LS, Scottsdale, Silverado, WT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1992-1999 Chevrolet C2500 SuburbanBase, LS, LT, Silverado8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1991-2000 Chevrolet C3500Base, Cheyenne, LS, Scottsdale, Silverado8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1991-1999 Chevrolet K1500Base, Cheyenne, LS, Scottsdale, Silverado, Sport, WT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL
    1992-1999 Chevrolet K1500 SuburbanBase, LS, LT, Silverado8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15736966 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15736966 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step in the replacement process for the 2000 Chevrolet K3500? Posted by Customer
    A:
    The first step is to remove the trim panel, water deflector, and access hole cover as needed.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be done after removing the outside door handle for the 2000 Chevrolet K3500? Posted by Customer
    A:
    Disconnect the power door lock connector and remove the lock assembly bolts to take out the lock assembly from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What should be replaced after disassembly for the 2000 Chevrolet K3500? Posted by Customer
    A:
    Replace the plastic retainers.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock
    Q:
    What is the next step after removing the screws for the 2002 Chevrolet S10? Posted by Customer
    A:
    Carefully lift and rotate the actuator to disengage the rubber bumper from the latch, then remove the actuator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be done after aligning the actuator for the 2002 Chevrolet S10? Posted by Customer
    A:
    Rotate the actuator toward the latch to fully engage the rubber bumper, then position the actuator at the top of the latch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What rods need to be installed to the latch assembly for the 2002 Chevrolet S10? Posted by Customer
    A:
    Install the outside door handle rod, outside lock rod, inside door handle rod, and inside door lock rod.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What is crucial to align during installation for the 2003 Chevrolet S10? Posted by Customer
    A:
    The first tooth of the gear on the actuator with the first tooth of the gear on the latch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be done after reconnecting the control rod to the latch for the 2000 Chevrolet K3500? Posted by Customer
    A:
    Reinstall the access hole cover and water deflector as necessary.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    How do you install the new lock assembly for the 2000 GMC C3500? Posted by Customer
    A:
    Position the lock assembly back into the door, ensuring to adhere to the Fastener Notice in Service Precautions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What should be done if the door lock actuator is equipped with an electrical connector for the 2000 GMC C2500? Posted by Customer
    A:
    Disconnect the electrical connector from the door lock actuator and remove the control rods as necessary.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    How do you install the new latch for the 2000 GMC C3500? Posted by Customer
    A:
    Position the latch onto the door, ensuring to follow the Fastener Notice in Service Precautions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What is the first step in the installation process for the 2000 GMC C3500? Posted by Customer
    A:
    Pull out the outside handle from the door opening and slide the latch outside door connector onto the outside handle rod before installing the latch into the door assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock
    Q:
    How should the latch be installed for the 2000 GMC C2500? Posted by Customer
    A:
    Install the latch onto the door and tighten the bolts to 9 N.m (80 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What are the final steps after installing the new actuator for the 2000 GMC C3500? Posted by Customer
    A:
    Finally, reinstall the water deflector, trim panel, and access hole cover as necessary.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be reconnected if equipped for the 2003 GMC Sonoma? Posted by Customer
    A:
    Reconnect the power actuator wiring connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What should be removed after the door trim panel for the 2003 GMC Sonoma? Posted by Customer
    A:
    Remove the water deflector and the door latch assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Lock, Rear 15736966 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15736966 Lock, Rear is available in the market under the name GM Door Lock, Door Lock Actuator, Door Latch Assembly. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15736966 Lock, Rear fits certain Chevrolet S10, Tahoe, Blazer models, as well as GMC Yukon, Sonoma, C1500. Additionally, it is compatible with Cadillac Escalade and Oldsmobile Bravada models.
The original GM component designated by manufacturer part number 15736966 maintains top performance when functioning as the Latch Assembly-Rear Side Door; Door Latch Assembly; Door Lock unit at its Rear. The component 15736966 is constructed from durable material and its dimensions span 6.2 x 3.3 x 3.2 inches while weighing 1.00 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Latch; Latch, Door Lock. The part 15736966 has available replacement options 15724461, 15966626. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.