OEM Chevrolet Silverado 1500 Classic Fuel Filler Hose

  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Fuel Filler Hoses found

  • Chevy Silverado 1500 Classic Fuel Filler Hose - 15126826
    Chevy Silverado 1500 Classic Fuel Filler Hose Diagram - 15126826
    View related parts
    Product Specifications
    • Other Name: Hose, Fuel Tank Filler
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    Fits the following Vehicles:
    • 2007 Chevrolet Silverado 1500 Classic | LS, LT, SS, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
  • Chevy Silverado 1500 Classic Fuel Filler Hose - 15938966
    Chevy Silverado 1500 Classic Fuel Filler Hose Diagram - 15938966
    View related parts
    Product Specifications
    • Other Name: Pipe Assembly-Fuel Tank Filler; Fuel Tank Filler Neck; Fuel Filler Hose; Filler Pipe; Pipe, Fuel Tank Filler
    • Replaces: 10365932, 15906101, 15289907
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    Fits the following Vehicles:
    • 2007 Chevrolet Silverado 1500 Classic | Hybrid, LS, LT, SS, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS

Chevrolet Silverado 1500 Classic Fuel Filler Hose

Our website offers an extensive catalog of genuine Chevrolet Silverado 1500 Classic Fuel Filler Hose at unbeatable prices. Every OEM Chevrolet Silverado 1500 Classic Fuel Filler Hose comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Silverado 1500 Classic Fuel Filler Hose Parts Questions & Experts Answers

  • Q: How to replace the fuel filler hose on Chevrolet Silverado 1500 Classic?
    A: Starting Fuel Filler Hose replacement requires programmers to eliminate the Fuel Tank filler housing body torx(r) screws and pushpin retainer and then detach the Fuel Tank filler housing bolts from the Fuel Tank fill pipe. Start the replacement process by removing the Fuel Tank filler housing after raising and supporting the vehicle at waist level. The replacement of the fuel fill pipe ground wire requires starting by removing its bolt and separating the ground wire anti-rotation tab from the frame hole. Proceed with repositioning the Fuel Tank fill pipe ground wire followed by the chassis harness ground wire and then detach the rear axle vent hose from its clip on the fuel fill pipe bracket. Remove the Fuel Tank fill pipe by first relaxing its clamp at the Fuel Tank then disconnecting the recirculation line from the sending unit. Secure a Fuel Tank cap on the opening to avoid contamination. The first step for installation involves taking off the cap from the Fuel Tank opening then installing the Fuel Tank fill pipe while reattaching the sending unit recirculation line. Install the rear axle vent hose to its clip on the fuel fill pipe bracket followed by closing the clip after tightening the Fuel Tank fill pipe clamp at the Fuel Tank to 2.5 n.m (22 lb in). The position of the Fuel Tank fill pipe ground wire and chassis harness ground wire allows you to install the ground wire anti-rotation tab into the frame hole before securing the ground wire bolt with a torque of 9 n.m (80 lb in). Lower the vehicle while installing the Fuel Tank filler housing by securing its bolts to the Fuel Tank fill pipe and tightening them at 2.3 n.m (20 lb in). For the Fuel Tank filler housing installation use torx(r) screws along with pushpin retainers and tighten them to 2.3 n.m (20 lb in).

Related Chevrolet Silverado 1500 Classic Parts