How to Replace Spark Plug Wires on Chevrolet Silverado 1500 Classic?

To remove the Spark Plug Wires you needed to twist the boot on the Spark Plug 1/2 turn and pull straight on the boot itself or use a tool designed for this purpose. Subsequently, disconnect the wires from the Distributor by twisting each Spark Plug boot 1/2 turn and again pulling only the boot or using a tool made for this purpose. Then, disconnect the wires from the wire separators. While installing, make sure the boots are properly seated, sideward pressure to them so that improper seating which may result in wire core erosion and engine misfire or crossfire, which may also damage the engine internally. Start by attaching the Spark Plug Wires to the Distributor and attach them to each Spark Plug and the wire separators as well. It is important to preserve the original routing of the wires during service. Once installed, inspect the wires by tilting from side to side on each boot to check for appropriate seating, reinstall loose boots and add fresh dielectric grease within the boot when the Spark Plug wire/boot is attached to the Spark Plug whenever possible.

OEM Chevrolet Silverado 1500 Classic Spark Plug Wires

Spark Plug Ignition Wires

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Spark Plug Wires found

View related parts
Chevrolet Silverado 1500 Classic Cable Set
Part Number: 19351572
$78.48 MSRP: $171.34
You Save: $92.86 (55%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Wire Kit, Spark Plug; Spark Plug Wire; Wire; Wire Kit, Spark Or Glow Plug Ignition
- Replaced by: 19417607
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007 Chevrolet Silverado 1500 Classic | Hybrid, LS, LT, SS, WT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Silverado 1500 Classic Wire Harness
Part Number: 12601824
$130.36 MSRP: $284.67
You Save: $154.31 (55%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Wire Assembly-Ignition Coil; Wire; Wire, Spark Plug Or Coil
- Replaces: 12562256, 15320906, 12582189
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007 Chevrolet Silverado 1500 Classic | Hybrid | 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV)
View related parts
Chevrolet Silverado 1500 Classic Cable Set
Part Number: 19417608
$90.81 MSRP: $196.55
You Save: $105.74 (54%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Wire Kit, Spark Plug; Spark Plug Wire; Ignition Set; Wire Kit, Spark Or Glow Plug Ignition
- Replaces: 88984266, 12192188, 19351574
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007 Chevrolet Silverado 1500 Classic | LS, WT | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Silverado 1500 Classic Cable Set
Part Number: 19417606
$75.08 MSRP: $163.92
You Save: $88.84 (55%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Wire Kit, Spark Plug; Spark Plug Wire; Plug Wire Set; Wire Kit, Spark Or Glow Plug Ignition
- Replaces: 88894393, 19351571, 88892762
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007 Chevrolet Silverado 1500 Classic | Hybrid, LS, LT, SS, WT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Silverado 1500 Classic Wire Harness
Part Number: 89017477
Product Specifications
- Other Name: Wire Assembly, Ignition Coil; Plug Wire; Wire; Wire, Spark Plug Or Coil
- Replaces: 10457732
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007 Chevrolet Silverado 1500 Classic | LS, LT, SS, WT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS

Chevrolet Silverado 1500 Classic Spark Plug Wires

Our website offers an extensive catalog of genuine Chevrolet Silverado 1500 Classic Spark Plug Wires at unbeatable prices. Every OEM Chevrolet Silverado 1500 Classic Spark Plug Wires comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Silverado 1500 Classic Spark Plug Wires Parts Questions & Experts Answers

Wire Harness
12601824
Q: How to Replace Spark Plug Wires on Chevrolet Silverado 1500 Classic?
A: To remove the Spark Plug Wires you needed to twist the boot on the Spark Plug 1/2 turn and pull straight on the boot itself or use a tool designed for this purpose. Subsequently, disconnect the wires from the Distributor by twisting each Spark Plug boot 1/2 turn and again pulling only the boot or using a tool made for this purpose. Then, disconnect the wires from the wire separators. While installing, make sure the boots are properly seated, sideward pressure to them so that improper seating which may result in wire core erosion and engine misfire or crossfire, which may also damage the engine internally. Start by attaching the Spark Plug Wires to the Distributor and attach them to each Spark Plug and the wire separators as well. It is important to preserve the original routing of the wires during service. Once installed, inspect the wires by tilting from side to side on each boot to check for appropriate seating, reinstall loose boots and add fresh dielectric grease within the boot when the Spark Plug wire/boot is attached to the Spark Plug whenever possible.