How to replace the upper intermediate steering shaft on Chevrolet Silverado 2500?

Begin the upper intermediate Steering Shaft replacement operation when both vehicle wheels face forward and the Steering Column sits in locked position to protect the sir coil assembly from damage. Install the Steering Column anti-rotation pin (J 42640) by locating it through the Steering Column lower access hole first. Identify all related points of the intermediate shaft components through marking the upper shaft's double clamp assembly and lower clamp assembly ties to the bolt and the connection junction between the upper and lower shaft sections. Remove first the nut and bolt connecting the lower shaft to upper shaft then proceed to remove the nut and bolt which connects the upper shaft to the Steering Column. Drive the intermediate shaft downward from its Steering Column connection before removing the accelerator pedal position sensor. After sliding the upper intermediate shaft towards the instrument panel you should detach it from the lower intermediate shaft before extracting this component from your automobile. The installation process requires shaft alignment through reuse of existing marks and lower end insertion of upper intermediate shaft into bulkhead and lower shaft. Attach the upper end of the upper intermediate shaft to the Steering Column before you install the bolt and nut at this location and torque the nut to 62 nm (46 ft. Lbs.). Add the accelerator pedal position sensor and retighten the connecting nut between upper and lower intermediate shafts at 47 nm (35 ft. Lbs.). Take out the Steering Column anti-rotation pin (J 42640) through the lower access hole of the Steering Column.

OEM Chevrolet Silverado 2500 Steering Shaft

Steering Stem Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Steering Shafts found

View related parts
Chevrolet Silverado 2500 Coupling Shaft
Part Number: 26078078
$244.53 MSRP: $381.33
You Save: $136.80 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly-Steering Gear Coupling; Steering Shaft; Coupling; Shaft, Steering Column Intermediate; Shaft, Steering Column
- Replaces: 26073805
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999 Chevrolet Silverado 2500 | Base, LS, LT | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Silverado 2500 Steering Shaft
Part Number: 19329330
$91.53 MSRP: $149.83
You Save: $58.30 (39%)
ADD TO CART
Product Specifications
- Other Name: Shaft, Steering Column Intermediate; Intermediate Shaft; Intermed Shaft
- Position: Upper
- Replaces: 26049343, 26088325, 26104449, 26083324, 26085548, 19149105, 26104447, 88965505, 89060582, 26093694, 88963611, 19153614
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2004 Chevrolet Silverado 2500 | Base, LS, LT, WT | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Silverado 2500 Coupling Shaft
Part Number: 25958109
$167.99 MSRP: $264.32
You Save: $96.33 (37%)
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly-Steering Gear Coupling; Steering Shaft; Lower Shaft; Coupling; Shaft, Steering Column Intermediate; Shaft, Steering Column
- Replaced by: 85104193
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2004 Chevrolet Silverado 2500 | Base, LS, LT, WT | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Silverado 2500 Steering Shaft
Part Number: 26090770
Product Specifications
- Other Name: Shaft Assembly, Steering; Lower Shaft; Shaft, Steering Column
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2004 Chevrolet Silverado 2500 | Base, LS, LT, WT | 8 Cyl 6.0 L GAS
View related parts
Chevrolet Silverado 2500 Steering Shaft, Lower
Part Number: 26083370
Product Specifications
- Other Name: Shaft, Lower Steering; Lower Shaft; Shaft, Steering Column
- Position: Lower
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2002 Chevrolet Silverado 2500 | Base, LS, LT | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Silverado 2500 Lower Shaft
Part Number: 26082130
Product Specifications
- Other Name: Shaft Assembly, Steering; Steering Shaft; Shaft, Steering Column
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003 Chevrolet Silverado 2500 | Base, LS, LT | 8 Cyl 6.0 L GAS
View related parts
Chevrolet Silverado 2500 Steering Shaft
Part Number: 26064247
Product Specifications
- Other Name: Shaft, Steering Column; Shaft Assembly; Upper Shaft; Shaft
- Position: Upper
- Replaces: 26036514
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2002 Chevrolet Silverado 2500 | Base, LS, LT | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS

Chevrolet Silverado 2500 Steering Shaft

Our website offers an extensive catalog of genuine Chevrolet Silverado 2500 Steering Shaft at unbeatable prices. Every OEM Chevrolet Silverado 2500 Steering Shaft comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Silverado 2500 Steering Shaft Parts Questions & Experts Answers

Coupling Shaft
25958109
Q: How to replace the upper intermediate steering shaft on Chevrolet Silverado 2500?
A: Begin the upper intermediate Steering Shaft replacement operation when both vehicle wheels face forward and the Steering Column sits in locked position to protect the sir coil assembly from damage. Install the Steering Column anti-rotation pin (J 42640) by locating it through the Steering Column lower access hole first. Identify all related points of the intermediate shaft components through marking the upper shaft's double clamp assembly and lower clamp assembly ties to the bolt and the connection junction between the upper and lower shaft sections. Remove first the nut and bolt connecting the lower shaft to upper shaft then proceed to remove the nut and bolt which connects the upper shaft to the Steering Column. Drive the intermediate shaft downward from its Steering Column connection before removing the accelerator pedal position sensor. After sliding the upper intermediate shaft towards the instrument panel you should detach it from the lower intermediate shaft before extracting this component from your automobile. The installation process requires shaft alignment through reuse of existing marks and lower end insertion of upper intermediate shaft into bulkhead and lower shaft. Attach the upper end of the upper intermediate shaft to the Steering Column before you install the bolt and nut at this location and torque the nut to 62 nm (46 ft. Lbs.). Add the accelerator pedal position sensor and retighten the connecting nut between upper and lower intermediate shafts at 47 nm (35 ft. Lbs.). Take out the Steering Column anti-rotation pin (J 42640) through the lower access hole of the Steering Column.