How to replace the Turn Signal Switch on Chevrolet Suburban 1500?

Begin the turn signal switch replacement by disabling SIR then removing both trim covers. Disconnect the wire harness assembly from its wire harness strap. Also record where the connector sits in the sleeve for easy setup. Pull both Turn Signal and Multifunction Switch Assembly connectors away from their SIR system coil connection then remove them through the Bulkhead Connector. Disassemble the turn signal and multifunction switch assembly from the steering column tilt head by removing its two pan head tapping screws. Install the turn signal and multifunction switch assembly onto the steering column tilt head holder and fasten it using two pan head tapping screws. Start by screwing in the top screw to 3 Nm then tighten the side screw to 7 Nm. Push the assembly connector onto the SIR coil connector while aligning its electrical sensor against the turn signal cancel cam assembly. Insert the two connectors of the Turn Signal and Multifunction Switch Assembly into the Bulkhead Connector. Place the wire harness assembly into the wire harness strap with proper positioning of the abrasion sleeve around steering column wires that exit from the middle of the sleeve. Complete the setup by fitting back the upper and lower trim parts then make SIR operational.

OEM Chevrolet Suburban 1500 Turn Signal Switch

Turn Signal Indicator Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Turn Signal Switches found

View related parts
Chevrolet Suburban 1500 Turn Signal Switch Part Number: 26100840
$149.18 MSRP: $278.38
You Save: $129.20 (47%)
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Turn Signal & Headlamp Dimmer, Wiper & Washer (W/Lever); Multi Purpose Combination Switch; Switch, Windshield Wiper & Washer Control; Switch, Turn Signal Lamp; Switch, Headlamp Dimmer
- Replaces: 26090413, 26096831, 26070321, 26083634
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2002 Chevrolet Suburban 1500 | Base, LS, LT, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Suburban 1500 Turn Signal Switch Part Number: 15849314
$45.07 MSRP: $66.20
You Save: $21.13 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Headlamp/Fog Lamp/Turn Signal; Multi Purpose Switch; Combination Switch; Switch, Windshield Wiper & Washer Control; Switch, Turn Signal Lamp; Switch, Headlamp Dimmer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2014 Chevrolet Suburban 1500 | LS, LT, LTZ | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Suburban 1500 Turn Signal Switch Part Number: 26100839
$243.26 MSRP: $396.90
You Save: $153.64 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Headlamp Dimmer; Multi Purpose Switch; Combination Switch; Switch, Windshield Wiper & Washer Control; Switch, Turn Signal Lamp
- Replaces: 26096830, 26083633, 26070320, 26090412
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2002 Chevrolet Suburban 1500 | Base, LS, LT, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Suburban 1500 Headlamp Switch Part Number: 25858705
$84.10 MSRP: $144.42
You Save: $60.32 (42%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly-Headlamp & Instrument Panel Lamp Dimmer & Dome Lamp; Multi Purpose Switch; Switch, Headlamp/Fog Lamp/Turn Signal; Switch, Headlamp
- Replaces: 15096895, 15926099
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2014 Chevrolet Suburban 1500 | LS, LT, LTZ | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Suburban 1500 Turn Signal Switch Part Number: 12450067
$148.01 MSRP: $304.16
You Save: $156.15 (52%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Headlamp Dimmer; Multi-Function Switch; Multi Purpose Switch; Multifunction Switch; Combination Switch; Switch, Windshield Wiper & Washer Control; Switch, Turn Signal Lamp
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2006 Chevrolet Suburban 1500 | Base, LS, LT, LTZ, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Suburban 1500 Turn Signal Switch Part Number: 12450066
$131.50 MSRP: $246.94
You Save: $115.44 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Turn Signal & Headlamp Dimmer, Wiper & Washer (W/Lever); Multi Purpose Switch; Combination Switch; Switch, Windshield Wiper & Washer Control; Switch, Turn Signal Lamp; Switch, Headlamp Dimmer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2006 Chevrolet Suburban 1500 | Base, LS, LT, LTZ, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Suburban 1500 Combination Switch Part Number: 22778093
Product Specifications
- Other Name: Switch Assembly-Accessory; Windshield Washer Switch; Adjuster Switch; Switch, Headlamp/Fog Lamp/Turn Signal
- Replaces: 15907026
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2014 Chevrolet Suburban 1500 | LS, LT, LTZ | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Suburban 1500 Combination Switch Part Number: 22778094
$36.05 MSRP: $53.65
You Save: $17.60 (33%)
Product Specifications
- Other Name: Switch Assembly-Accessory; Windshield Washer Switch; Adjuster Switch; Switch, Headlamp/Fog Lamp/Turn Signal
- Replaces: 15916346
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2014 Chevrolet Suburban 1500 | LS, LT, LTZ | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS

Chevrolet Suburban 1500 Turn Signal Switch

Want to cut long-term maintenance and repair costs? Choose OEM Turn Signal Switch. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Suburban 1500 parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Suburban 1500 Turn Signal Switch includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Chevrolet Suburban 1500 Turn Signal Switch Parts Questions & Experts Answers

Turn Signal Switch
12450067
Q: How to replace the Turn Signal Switch on Chevrolet Suburban 1500?
A:
Begin the turn signal switch replacement by disabling SIR then removing both trim covers. Disconnect the wire harness assembly from its wire harness strap. Also record where the connector sits in the sleeve for easy setup. Pull both Turn Signal and Multifunction Switch Assembly connectors away from their SIR system coil connection then remove them through the Bulkhead Connector. Disassemble the turn signal and multifunction switch assembly from the steering column tilt head by removing its two pan head tapping screws. Install the turn signal and multifunction switch assembly onto the steering column tilt head holder and fasten it using two pan head tapping screws. Start by screwing in the top screw to 3 Nm then tighten the side screw to 7 Nm. Push the assembly connector onto the SIR coil connector while aligning its electrical sensor against the turn signal cancel cam assembly. Insert the two connectors of the Turn Signal and Multifunction Switch Assembly into the Bulkhead Connector. Place the wire harness assembly into the wire harness strap with proper positioning of the abrasion sleeve around steering column wires that exit from the middle of the sleeve. Complete the setup by fitting back the upper and lower trim parts then make SIR operational.