How to replace a shock absorber on Chevrolet Suburban 2500?

The vehicle needs to be raised through a lift then supported before starting the Shock Absorber replacement process by installing jack stands below the lower Control Arm. The technician should first disconnect the (RTD) link rod from the sensor device and remove the electrical connector if the vehicle has selectable ride. Rephrase the following sentence. Also normalize verbalization when possible. The connector lock tabs (1, 2) should be rotated counterclockwise to unlock the connector, which can be disengaged by pulling upwards. Have a wrench ready to hold the tennon end while removing the nut before taking out the upper insulator except for the plastic pilot ring. Disassemble the Shock Absorber mounting bolt at the lower Control Arm for 15 series and 25/35 series vehicles and the Shock Absorber can be extracted. Before mounting the Shock Absorber stem must pass through the shock bracket opening on the frame until it lines up with both lower Control Arm holes from both series. Mount the Shock Absorber by passing it through the lower Control Arm bolt which leads to the bolt nut then complete tightening this nut to 80 nm (59 ft. Lbs.). The upper insulator needs to go on top of the shock mounting bracket on the frame with the plastic pilot ring used to align it properly. The Shock Absorber receives the upper insulator followed by attaching the nut to the tennon end without tightening it. Connect the rtd link rod to the sensor if it exists and then take away safety stands before lowering the vehicle. A wrench should be applied to the tennon end while tightening the nut to 20 nm (15 ft. Lbs.). Verify selectable ride equipment has an unlocked connector before aligning the tabs perpendicular to the wrench flats on the tennon end and engaging by firm downward pressure. Rotate the lock tabs (1, 2) counterclockwise until they snap into place along with an audible noise while maintaining their perpendicular alignment with the wrench flats on the tennon end. Finally, dispose of the Shock Absorber.

OEM Chevrolet Suburban 2500 Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

33 Shock Absorbers found

View related parts
Chevrolet Suburban 2500 Shock Absorber
Part Number: 89038654
$72.42 MSRP: $140.57
You Save: $68.15 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Rear Shock; Suspension Shock Absorber; Shock; Absorber, Front And Rear Suspension
- Position: Rear
- Replaces: 22400060, 22400063
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Chevrolet Suburban 2500 | Base, LS, LT | 8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
View related parts
Chevrolet Suburban 2500 Shock Absorber, Black, Rear
Part Number: 19368462
$358.90 MSRP: $696.56
You Save: $337.66 (49%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Rear Leveling Shock *Black; Shock; Absorber, Shock Absorber Air Lift
- Position: Rear
- Replaces: 15869656, 15924687, 23487283, 15945872, 15869657, 19300071, 25885469, 25979393
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2013 Chevrolet Suburban 2500 | LS, LT, LTZ | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Suburban 2500 Shock Absorber
Part Number: 20951274
$36.06 MSRP: $106.73
You Save: $70.67 (67%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber, Shock; Suspension Shock Absorber; Shock; Absorber, Front And Rear Suspension
- Position: Front
- Replaces: 19211023
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2013 Chevrolet Suburban 2500 | LS, LT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Suburban 2500 Shock Absorber
Part Number: 25984611
$65.59 MSRP: $128.41
You Save: $62.82 (49%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Suspension Shock Absorber; Shock; Absorber, Front And Rear Suspension
- Position: Rear
- Replaces: 15926848, 15926847, 25818491
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chevrolet Suburban 2500 | LS, LT, LTZ | 8 Cyl 6.0 L GAS
View related parts
Chevrolet Suburban 2500 Shock Absorber
Part Number: 25980102
$135.89 MSRP: $243.73
You Save: $107.84 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber, Shock; Suspension Strut and Shock Assembly Kit; Air Spring to Coil Conversion Kit; Complete Strut.; Strut; Absorber, Front And Rear Suspension
- Position: Front
- Replaced by: 19435702
- Replaces: 15905101
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2010 Chevrolet Suburban 2500 | LS, LT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Suburban 2500 Shock Absorber
Part Number: 20951275
$74.96 MSRP: $153.05
You Save: $78.09 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber, Shock; Suspension Shock Absorber; Shock; Absorber, Front And Rear Suspension
- Position: Front
- Replaced by: 19436378
- Replaces: 19177927, 19208628
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2013 Chevrolet Suburban 2500 | LS, LT | 8 Cyl 6.0 L FLEX
View related parts
Chevrolet Suburban 2500 Shock, Rear
Part Number: 12477645
$408.16 MSRP: $792.15
You Save: $383.99 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Kit, Rear Shock; Shock Absorber; Absorber Kit, Front And Rear Suspension
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2003 Chevrolet Suburban 2500 | LS, LT | 8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
View related parts
Chevrolet Suburban 2500 Shock Absorber
Part Number: 25871227
$132.47 MSRP: $239.75
You Save: $107.28 (45%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Suspension Strut and Shock Absorber Assembly Kit; Air to Coil Spring Conversion; Complete Strut Kit.; Shock; Absorber, Front And Rear Suspension
- Position: Rear
- Replaces: 25871228
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chevrolet Suburban 2500 | LS, LT, LTZ | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Suburban 2500 Shock Absorber
Part Number: 25871231
$89.53 MSRP: $173.80
You Save: $84.27 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Suspension Strut and Shock Absorber Assembly Kit; Air to Coil Spring Conversion; Complete Strut Kit.; Shock; Absorber, Front And Rear Suspension
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chevrolet Suburban 2500 | LS, LT, LTZ | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Suburban 2500 Shock Absorber
Part Number: 22755311
$53.68 MSRP: $155.22
You Save: $101.54 (66%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock; Absorber, Front And Rear Suspension
- Position: Rear
- Replaced by: 19435692
- Replaces: 20955409
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011 Chevrolet Suburban 2500 | LS, LT | 8 Cyl 6.0 L FLEX
View related parts
Chevrolet Suburban 2500 Shock Absorber
Part Number: 20955500
$65.72 MSRP: $189.98
You Save: $124.26 (66%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber, Shock; Suspension Strut and Shock Assembly Kit; Air Spring to Coil Conversion Kit; Complete Strut.; Strut; Absorber, Front And Rear Suspension
- Position: Front
- Replaced by: 19435688
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2013 Chevrolet Suburban 2500 | LS, LT | 8 Cyl 6.0 L FLEX
View related parts
Chevrolet Suburban 2500 Shock Absorber
Part Number: 20955497
$93.05 MSRP: $180.58
You Save: $87.53 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber, Shock; Suspension Strut and Shock Assembly Kit; Air Spring to Coil Conversion Kit; Complete Strut.; Shock; Strut; Absorber, Front And Rear Suspension
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2013 Chevrolet Suburban 2500 | LS, LT | 8 Cyl 6.0 L FLEX
View related parts
Chevrolet Suburban 2500 Shock Absorber, Front
Part Number: 19209331
$75.51 MSRP: $147.82
You Save: $72.31 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Kit, Front Shock; Suspension Shock Absorber; Shock; Absorber Kit, Front And Rear Suspension
- Position: Front
- Replaces: 19152880, 22400058, 19152879, 88983817, 22064863
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2009 Chevrolet Suburban 2500 | Base, LS, LT, LTZ | 8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
View related parts
Chevrolet Suburban 2500 Shock Absorber
Part Number: 20765198
$91.73 MSRP: $187.28
You Save: $95.55 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber, Shock; Strut; Absorber, Front And Rear Suspension
- Position: Front
- Replaced by: 19435676
- Replaces: 25871240, 25871212
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2010 Chevrolet Suburban 2500 | LS, LT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Suburban 2500 Shock Absorber
Part Number: 20955408
$68.19 MSRP: $133.49
You Save: $65.30 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Suspension Strut and Shock Absorber Assembly Kit; Air to Coil Spring Conversion; Complete Strut Kit.; Shock; Absorber, Front And Rear Suspension
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2013 Chevrolet Suburban 2500 | LS, LT | 8 Cyl 6.0 L FLEX
View related parts
Chevrolet Suburban 2500 Shock Absorber, Front
Part Number: 19420489
$333.45 MSRP: $647.16
You Save: $313.71 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Front Shock; Shock; Absorber, Front And Rear Suspension
- Position: Front
- Replaces: 15918522, 19209555, 19300031, 19353945, 19368453, 25845446, 25845438, 25888675, 15909491, 15939374, 25888683, 25888684, 15886465, 25845447
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2008 Chevrolet Suburban 2500 | LS, LT, LTZ | 8 Cyl 6.0 L GAS
View related parts
Chevrolet Suburban 2500 Shock Absorber
Part Number: 20906291
$74.55 MSRP: $144.72
You Save: $70.17 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Suspension Shock Absorber; Shock; Absorber, Front And Rear Suspension
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2013 Chevrolet Suburban 2500 | LS, LT | 8 Cyl 6.0 L FLEX
View related parts
Chevrolet Suburban 2500 Shock Absorber
Part Number: 20765177
$146.01 MSRP: $274.19
You Save: $128.18 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber, Shock; Suspension Strut and Shock Assembly Kit; Air Spring to Coil Conversion Kit; Complete Strut.; Absorber, Front And Rear Suspension
- Position: Front
- Replaces: 25876834
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2010 Chevrolet Suburban 2500 | LS, LT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Suburban 2500 Shock Absorber
Part Number: 20951277
$53.15 MSRP: $104.05
You Save: $50.90 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Suspension Shock Absorber; Shock; Absorber, Front And Rear Suspension
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2013 Chevrolet Suburban 2500 | LS, LT | 8 Cyl 6.0 L FLEX
View related parts
Chevrolet Suburban 2500 Shock Absorber
Part Number: 20958798
$107.69 MSRP: $192.29
You Save: $84.60 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber, Shock; Suspension Strut and Shock Assembly Kit; Air Spring to Coil Conversion Kit; Complete Strut.; Strut; Absorber, Front And Rear Suspension
- Position: Front
- Replaced by: 19435690
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2013 Chevrolet Suburban 2500 | LS, LT | 8 Cyl 6.0 L FLEX

| Page 1 of 2 |Next >

1-20 of 33 Results

Chevrolet Suburban 2500 Shock Absorber

Our website offers an extensive catalog of genuine Chevrolet Suburban 2500 Shock Absorber at unbeatable prices. Every OEM Chevrolet Suburban 2500 Shock Absorber comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Suburban 2500 Shock Absorber Parts Questions & Experts Answers

Shock Absorber
89038654
Q: How to replace a shock absorber on Chevrolet Suburban 2500?
A: The vehicle needs to be raised through a lift then supported before starting the Shock Absorber replacement process by installing jack stands below the lower Control Arm. The technician should first disconnect the (RTD) link rod from the sensor device and remove the electrical connector if the vehicle has selectable ride. Rephrase the following sentence. Also normalize verbalization when possible. The connector lock tabs (1, 2) should be rotated counterclockwise to unlock the connector, which can be disengaged by pulling upwards. Have a wrench ready to hold the tennon end while removing the nut before taking out the upper insulator except for the plastic pilot ring. Disassemble the Shock Absorber mounting bolt at the lower Control Arm for 15 series and 25/35 series vehicles and the Shock Absorber can be extracted. Before mounting the Shock Absorber stem must pass through the shock bracket opening on the frame until it lines up with both lower Control Arm holes from both series. Mount the Shock Absorber by passing it through the lower Control Arm bolt which leads to the bolt nut then complete tightening this nut to 80 nm (59 ft. Lbs.). The upper insulator needs to go on top of the shock mounting bracket on the frame with the plastic pilot ring used to align it properly. The Shock Absorber receives the upper insulator followed by attaching the nut to the tennon end without tightening it. Connect the rtd link rod to the sensor if it exists and then take away safety stands before lowering the vehicle. A wrench should be applied to the tennon end while tightening the nut to 20 nm (15 ft. Lbs.). Verify selectable ride equipment has an unlocked connector before aligning the tabs perpendicular to the wrench flats on the tennon end and engaging by firm downward pressure. Rotate the lock tabs (1, 2) counterclockwise until they snap into place along with an audible noise while maintaining their perpendicular alignment with the wrench flats on the tennon end. Finally, dispose of the Shock Absorber.

Related Chevrolet Suburban 2500 Parts

Browse Chevrolet Suburban 2500 Shock Absorber by Years

2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000