Other Name: Insulator-Exhaust Muffler Hanger; Exhaust Insulator; Exhaust Bracket; Exhaust Hanger; Muffler & Pipe Insulator, Center Muffler, Intermed Pipe, Exhaust Pipe, Rear Muffler, Hanger, Mount
Replaces: 15740212
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2007-2023 Chevrolet Tahoe | High Country, Hybrid, LS, LT, LTZ, PPV, Premier, RST, SSV, Z71 | 6 Cyl 3.0 L DIESEL, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1997-2000 Chevrolet Tahoe | Base, Limited, LS, LT, Z71 | 8 Cyl 5.7 L GAS
Chevrolet Tahoe Exhaust Hanger
Our website offers an extensive catalog of genuine Chevrolet Tahoe Exhaust Hanger at unbeatable prices. Every OEM Chevrolet Tahoe Exhaust Hanger comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Chevrolet Tahoe Exhaust Hanger Parts Questions & Experts Answers
Q: How to service and repair the Exhaust Hanger on Chevrolet Tahoe?
A: You should first support and raise the vehicle before commencing any repair or service of the Exhaust Pipe/muffler hanger. The first step involves removing protective shields when needed before extracting the rear exhaust system together with the Catalytic Converter and front pipe. Motorists should remove the Exhaust Hanger bracket bolts first and then the Exhaust Hanger bracket for automatic transmission vehicles and for manual transmission vehicles the order is Exhaust Hanger bracket bolts then Exhaust Hanger bracket. You should start installation by placing the Exhaust Hanger bracket while adhering to the fastener notice in service precautions. Tighten the Exhaust Hanger bracket bolts to 12 nm using 106 inch lbs when working with automatic transmission units while manual transmission units require a torque of 14 nm or 10 ft. Lbs. Proceed with the installation of the front pipe and Catalytic Converter while incorporating the rear exhaust system. The protective shields should be installed when required. Take off the safety stands before lowering the vehicle to completion.