Other Name: Liner, Rear Wheelhouse; Fender Splash Shield; Liner, Fuel Door & Body Side
Position: Rear Passenger Side
Replaces: 15852759
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2007-2014 Chevrolet Tahoe | Hybrid, LS, LT, LTZ | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
Other Name: Liner, Rear Wheelhouse; Fender Splash Shield; Liner, Fuel Door & Body Side
Position: Rear Driver Side
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2007-2014 Chevrolet Tahoe | Hybrid, LS, LT, LTZ | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
Other Name: Liner, Rear Wheelhouse; Fender Splash Shield; Liner, Fuel Door & Body Side
Position: Rear Driver Side
Replaces: 15852762
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2007-2014 Chevrolet Tahoe | LS, LT, LTZ | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
| Page 1 of 2 |Next >
1-20 of 26 Results
Chevrolet Tahoe Fender Splash Shield
Our website offers an extensive catalog of genuine Chevrolet Tahoe Fender Splash Shield at unbeatable prices. Every OEM Chevrolet Tahoe Fender Splash Shield comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Chevrolet Tahoe Fender Splash Shield Parts Questions & Experts Answers
Q: How to replace the front Fender Splash Shield on Chevrolet Tahoe?
A: Start the wheelhouse panel replacement by removing the push-in retainers on the fender splash shield before proceeding to remove retainers from front fascia (when necessary). Start by detaching the top clips which maintain the harness position to the fender splash shield top and then remove the fender splash shield from the wheelhouse area. Place the fender splash shield inside the wheelhouse framework then fasten it by using the push-in retainers. Reposition the retainers attached to the front fascia the same way you did for removal and then secure the top clips which will hold the harness at the fender splash shield top.