How to replace the Rack and Pinion Boot on Chevrolet Tracker?

To replace the Rack And Pinion boot on the vehicle, you first need to raise and support the vehicle, as well as remove the outer tie rod. Then peel off the boot clip and the boot band , and finally the boot separation from the inner tie rod. For installation, fit the boot into the groove of the steering gear and fasten it with the boot band. Applying chassis grease gm pn 12377985 or equivalent on the inner tie, it should not twist, dented or folded boot. Tighten the boo to the inner tie down rod with the boot clip and reposition the outer tie down rod then lower the vehicle.

OEM Chevrolet Tracker Rack and Pinion Boot

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Rack and Pinion Boots found

View related parts
Chevrolet Tracker Tie Rod Boot Part Number: 91175533
Product Specifications
- Other Name: Boot, Tie Rod End Dust; Power Steering Cylinder Boot Kit; Rack and Pinion Boot; Boot
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2004 Chevrolet Tracker | Base, LSi, LT, ZR2 | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chevrolet Tracker Tie Rod Boot Part Number: 91175532
Product Specifications
- Other Name: Boot, Tie Rod End Dust; Power Steering Cylinder Boot Kit; Rack and Pinion Boot; Boot
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2004 Chevrolet Tracker | Base, LSi, LT, ZR2 | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS

Chevrolet Tracker Rack and Pinion Boot

Want to cut long-term maintenance and repair costs? Choose OEM Rack and Pinion Boot. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Tracker parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Tracker Rack and Pinion Boot includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Chevrolet Tracker Rack and Pinion Boot is another crucial part that epitomizes the competence of Chevrolet Tracker models. This rubber boot has the role of shielding the steering rack from unwanted debris such as dirt and such like, hence the internal structures and components of the rack and pinion are protected. It is essential to pay much attention to Rack and Pinion Boot because any damage on it contributes to increased vulnerability of the steering system. This component proves especially beneficial for the Chevrolet Tracker as it contributes to both efficiency, as well as the vehicle's safety, during its operation designed for versatile and off-road use. Compatible with many Tracker models, the Rack and Pinion Boot is always used throughout the generations of the vehicle so that the drivers are able to have the premier and most responsive product. It is worthy of note that the Chevrolet Tracker automobiles have gone through numerous models since the first one that rolled out in 1988 and each model has been informed by the strength of the Rack and Pinion Boot. This component can easily be identified in the automotive market UT is very strong and efficient in maintaining the structural management of the vehicle's steering system. Through protecting the rack and pinion assembly, the Chevrolet Tracker Rack and Pinion Boot beautifies the look of the car while at the same time plays an important role as one of the safety part in the car that completes the unbeatable Chevrolet Tracker Rack and Pinion Boot.

Chevrolet Tracker Rack and Pinion Boot Parts Questions & Experts Answers

Tie Rod Boot
91175533
Q: How to replace the Rack and Pinion Boot on Chevrolet Tracker?
A:
To replace the Rack And Pinion boot on the vehicle, you first need to raise and support the vehicle, as well as remove the outer tie rod. Then peel off the boot clip and the boot band , and finally the boot separation from the inner tie rod. For installation, fit the boot into the groove of the steering gear and fasten it with the boot band. Applying chassis grease gm pn 12377985 or equivalent on the inner tie, it should not twist, dented or folded boot. Tighten the boo to the inner tie down rod with the boot clip and reposition the outer tie down rod then lower the vehicle.

Related Chevrolet Tracker Parts

Browse Chevrolet Tracker Rack and Pinion Boot by Years

2004 2003 2002 2001 2000 1999