How to replace the fuel pressure sensor in the fuel injection fuel rail on GMC Acadia?

A technician must use ch-48027 or do not use it to eliminate fuel system pressure before Fuel Pressure Sensor replacement on the fuel injection Fuel Rail. The first step involves extracting both the Intake Manifold and the foam insulator situated on the fuel rails. Clean the location where the sensor attaches to both the fuel line and fuel injection Fuel Rail yet ensure you avoid contaminating the area then exercise care when handling the plastic sensor housing. A 27 mm socket should be used to remove the Fuel Pressure Sensor from the fuel injection Fuel Rail after sensor discard. Absorb all remaining fuel from the Fuel Rail and sensor area before drying this area and the sealing cone inside the rail with a lint-free cloth to ensure complete absence of fuel and debris. Apply gm p/n 12345610 (Canadian P/N 993193) silicon-free engine oil or equivalent to both the sealing cone and threads of the new Fuel Pressure Sensor along with the Fuel Rail. Replace the new Fuel Pressure Sensor at the fuel injection Fuel Rail with hand tightening but remove it and relubricate according to earlier directions. Fasten the new Fuel Pressure Sensor onto the fuel injection Fuel Rail until torque reaches 33 nm (25 lb ft). The replacement process includes putting back the foam insulators into both the fuel rails and the Intake Manifold. Replacement of the Fuel Rail is necessary if the fuel leak occurs at this Fuel Rail component. To inspect for fuel leaks turn on the ignition with engine off for two seconds while checking for any fuel leaks followed by turning off ignition for ten seconds before checking for further leaks when re-turning on ignition with engine off.

OEM GMC Acadia Fuel Pressure Sensor

Fuel Tank Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Fuel Pressure Sensors found

View related parts
GMC Acadia Fuel Pressure Regulator, Passenger Side Part Number: 16238399
$54.17 MSRP: $101.06
You Save: $46.89 (47%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Fuel Tank Pressure; Fuel Tank Pressure Sensor; Fuel Pressure Sensor; Pressure Regulator; Sensor, Early Fuel Evaporation; Fuel Gauge Sending Unit; Tank Pressure Sensor
- Position: Passenger Side
- Replaces: 12206740, 16217059, 16257276, 22678829, 09377680, 12219388, 16196060, 9377680
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2008 GMC Acadia | SLE, SLT | 6 Cyl 3.6 L GAS
View related parts
GMC Acadia Pressure Sensor, Passenger Side Part Number: 13502903
$48.74 MSRP: $100.17
You Save: $51.43 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Kit, Fuel Tank Meter/Pump; Fuel Tank Pressure Sensor; Level Sensor; Tank Pressure Sensor; Sensor; Sensor, Early Fuel Evaporation; Sensor, Fuel Tank Meter/Pump
- Position: Passenger Side
- Replaces: 13502510
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2023 GMC Acadia | AT4, Denali, SL, SLE, SLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
GMC Acadia Pressure Sensor Part Number: 12682589
$52.23 MSRP: $106.10
You Save: $53.87 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Fuel Injection Fuel Rail Fuel Pressure; Fuel Tank Pressure Sensor; Fuel Pressure Sensor; Sensor, Computer Control Sensors
- Replaces: 12662738, 12652442
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017-2018 GMC Acadia | Denali, SLE, SLT | 6 Cyl 3.6 L GAS
View related parts
GMC Acadia Pressure Sensor Part Number: 12618108
$100.46 MSRP: $204.04
You Save: $103.58 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Fuel Injection Fuel Rail Fuel Pressure; Fuel Tank Pressure Sensor; Fuel Pressure Sensor; Sensor; Sensor, Computer Control Sensors
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2012-2016 GMC Acadia | Denali, SL, SLE, SLT | 6 Cyl 3.6 L GAS
View related parts
GMC Acadia Pressure Sensor Part Number: 25201778
$51.00 MSRP: $91.08
You Save: $40.08 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Fuel Injection; Fuel Rail Pressure Sensor; Fuel Tank Pressure Sensor
- Replaced by: 28289962
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017-2021 GMC Acadia | SL, SLE, SLT | 4 Cyl 2.5 L GAS
View related parts
GMC Acadia Pressure Sensor Part Number: 12708493
$22.92 MSRP: $43.04
You Save: $20.12 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Fuel Injection; Fuel Rail Pressure Sensor; Fuel Tank Pressure Sensor; Sensor, Computer Control Sensors
- Replaces: 12684286, 12664124
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019-2023 GMC Acadia | AT4, Denali, SLE, SLT | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS

GMC Acadia Fuel Pressure Sensor

Want to cut long-term maintenance and repair costs? Choose OEM Fuel Pressure Sensor. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine GMC Acadia parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM GMC Acadia Fuel Pressure Sensor includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Fuel Pressure Sensor in GMC Acadia cars is a kind of fuel tank pressure sensor, used to sense the pressure change within the tank in order to check for leaks. Also, the rail pressure sensor measures the pressure within the rail, and transmits this data to internal computer, where it may trigger adjustments to the vehicle's timing. The consequences of a flawed sensor are a difficult start, poor fuel economy, power, and increased acceleration. Sometimes, warning signs, such as the check engine light, may point at the fuel pressure sensor as being faulty and this re-emphasizes on the need to have a vehicle properly tuned.

GMC Acadia Fuel Pressure Sensor Parts and Q&A

Pressure Sensor, Passenger Side
13502903
Q: How to replace the fuel pressure sensor in the fuel injection fuel rail on GMC Acadia?
A:
A technician must use ch-48027 or do not use it to eliminate fuel system pressure before Fuel Pressure Sensor replacement on the fuel injection Fuel Rail. The first step involves extracting both the Intake Manifold and the foam insulator situated on the fuel rails. Clean the location where the sensor attaches to both the fuel line and fuel injection Fuel Rail yet ensure you avoid contaminating the area then exercise care when handling the plastic sensor housing. A 27 mm socket should be used to remove the Fuel Pressure Sensor from the fuel injection Fuel Rail after sensor discard. Absorb all remaining fuel from the Fuel Rail and sensor area before drying this area and the sealing cone inside the rail with a lint-free cloth to ensure complete absence of fuel and debris. Apply gm p/n 12345610 (Canadian P/N 993193) silicon-free engine oil or equivalent to both the sealing cone and threads of the new Fuel Pressure Sensor along with the Fuel Rail. Replace the new Fuel Pressure Sensor at the fuel injection Fuel Rail with hand tightening but remove it and relubricate according to earlier directions. Fasten the new Fuel Pressure Sensor onto the fuel injection Fuel Rail until torque reaches 33 nm (25 lb ft). The replacement process includes putting back the foam insulators into both the fuel rails and the Intake Manifold. Replacement of the Fuel Rail is necessary if the fuel leak occurs at this Fuel Rail component. To inspect for fuel leaks turn on the ignition with engine off for two seconds while checking for any fuel leaks followed by turning off ignition for ten seconds before checking for further leaks when re-turning on ignition with engine off.