OEM GMC Acadia Power Steering Pump

GMC Acadia Power Steering Pump Parts and Q&A

• Power Steering Pump
  85112727
  Q: How to replace the power steering pump on GMC Acadia?

  A:

  Replace the Power Steering Pump by starting with fuel injector sight shield removal and emptying the remote power steering fluid reservoir through drainage which requires appropriate drain pans positioned beneath the vehicle. The Drive Belt must be dismantled after the steering gear heat shield and right side Catalytic Converter. Begin by disconnecting the power steering fluid reservoir outlet hose from the Power Steering Pump followed by removing the power steering gear inlet hose . Then take out the Power Steering Pump after removing its bolts . To install the Power Steering Pump insert it into the vehicle and tightening the Power Steering Pump bolts to 50 n.m (37 lb ft). After fitting along the power steering gear inlet hose to its Power Steering Pump location, use 27 n.m (20 lb ft) torque then attach the power steering fluid reservoir outlet hose to the Power Steering Pump. First wipe all remaining fluid from the vehicle and discard the drain pans before putting back the right side Catalytic Converter and steering gear heat shield and Drive Belt. The procedure ends by adding power steering fluid through a process of bleeding before installing the fuel injector sight shield.