OEM GMC Acadia Power Steering Reservoir

GMC Acadia Power Steering Reservoir Parts and Q&A

• Reservoir
  25879975
  Q: How to replace the Power Steering Reservoir on GMC Acadia?

  A:

  The replacement process of the Power Steering Reservoir begins by taking off the fuel injector sight shield. Users must drain all available power steering fluid from the remote Power Steering Reservoir before placing position drain pans beneath the vehicle. Start by compressing the clamp on the inlet Power Steering Reservoir hose to disconnect its connection with the remote Power Steering Reservoir and then disconnect the outlet hose with its clamp being compressed. Use a wrench to untighten the remote Power Steering Reservoir bolts after which you can remove the reservoir. Secure the remote Power Steering Reservoir in position then fasten it with bolts while tightening the bolts to 9 nm (80 lb in). Connect the power steering outlet hose to the reservoir while applying a clamp before connecting the inlet hose using another clamp. Afterward clean all extra fluid from the vehicle then take out drain pans. To complete the procedure you should fill the power steering system and bleed it before reinstalling the fuel injector sight shield.
• Reservoir Nut
  25879877
  Q: How to Service and Repair the Power Steering Reservoir on GMC Acadia?

  A:

  The first step to replace the remote power steering reservoir demands removing the fuel injector sight shield followed by draining power steering fluid from the reservoir until it empties. The power steering system requires the inlet hose and the outlet hose to be unplugged before removing the reservoir by its bolts. Start installation by placing the new reservoir in position then fasten it using bolts before tightening them to 9 N.m (80 lb in). The first step involves connecting the outlet hose and the inlet hose, following which the vehicle needs cleaning of any remaining fluid before removing the drain pans. Complete the power steering system filling process and eliminate air from the system before you replace the fuel injector sight shield.