How to replace the front brake disc on GMC C2500?

Get the job started by lifting and supporting the vehicle while draining 2/3 of the brake fluid from the master cylinder. Take out the tire first and wheel next. Both components come out as a set with the caliper and mounting bracket. Keep them suspended using sturdy wire attached to the suspension. Clean and spray penetrating oil into the hub/disc space. Insert two M10 x 1.5 jack screws into threaded disc holes and equally tighten them to push off the disc when it won't come off due to corrosion in its hub area. During installation you must clean all rust and debris from both disc faces before placing the hub flange which should have no visible damage if steel jacks were used. First add the disc and attach the caliper and its bracket together. Install this assembly plus the tire and wheel combination afterward. Afterward take away protective stands and slowly drop the vehicle.

How to replace the rear brake disc on GMC C2500?

You need to release the parking brake then take out two-thirds of the brake fluid from the master cylinder before replacing the rear Brake Disc. Lift the vehicle before dismounting the tire and wheel unit. Use wire to suspend the caliper and mounting bracket assembly as one unit from the suspension after you disconnect its bolts. Untwist the disc slowly while pulling it away from the axle center. Clean both sides of the wheel and axle hub before inserting the disc and twisting it into place toward the axle. Mount back the Steering Knuckle assembly with the caliper and its holder. Clear away existing adhesive from the bolt threads before putting on new caliper mounting bracket bolts. Brush threads with brake parts cleaner until dry and let them dry naturally. Cover the bolt threads with gm threadlocker p/n 12345493 or red loctite product #272. Fasten the caliper mounting bracket bolts to the Steering Knuckle unit and torque them at 175 n.m (129 lb ft) for 15 series models while achieving 300 n.m (221 lb ft) for 25 series vehicles. Complete the process by installing the tire and wheel components, then take away the safety stands and lower the vehicle.

OEM GMC C2500 Brake Disc

Disc Rotor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

16 Brake Discs found

View related parts
GMC C2500 Hub & Rotor, Front Part Number: 19202727
Product Specifications
- Other Name: Rotor Assembly, Front Brake; Disc Brake Hardware Kit; Brake Rotor; Rotor; Rotor, Front And Rear Wheel Brake
- Position: Front
- Replaces: 15721421, 18060216, 19152697, 15981319
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2000 GMC C2500 | Sierra SL, Sierra SLE, Sierra SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
GMC C2500 Hub & Rotor, Front Part Number: 19202730
Product Specifications
- Other Name: Rotor Assembly, Front Brake; Disc Brake Hardware Kit; Brake Rotor; Rotor; Rotor, Front And Rear Wheel Brake
- Position: Front
- Replaces: 18060222, 19152689, 15981316
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2000 GMC C2500 | Sierra SL, Sierra SLE, Sierra SLT | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
GMC C2500 Rotor, Front Part Number: 15679744
Product Specifications
- Other Name: Disc-Front Wheel; Disc Brake Hardware Kit; Brake Rotor; Rotor, Front And Rear Wheel Brake
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-1991 GMC C2500 | Sierra, Sierra SLE, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
GMC C2500 Rotor, Front Part Number: 15679710
Product Specifications
- Other Name: Rotor, Front Brake; Disc Brake Hardware Kit; Brake Rotor; Rotor, Front And Rear Wheel Brake
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-1999 GMC C2500 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
GMC C2500 Hub & Rotor Part Number: 15674408
Product Specifications
- Other Name: Rotor, Front And Rear Wheel Brake; Disc Brake Hardware Kit; Brake Rotor; Rotor
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1986 GMC C2500 | Base, High Sierra, Sierra Classic | 6 Cyl 4.1 L GAS, 6 Cyl 4.3 L GAS, 6 Cyl 4.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
GMC C2500 Rotor Part Number: 15544322
Product Specifications
- Other Name: Rotor, Front And Rear Wheel Brake; Brake Rotor
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1996 GMC C2500 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
GMC C2500 Rotor Part Number: 15534074
Product Specifications
- Other Name: Rotor, Front And Rear Wheel Brake; Brake Rotor
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1994 GMC C2500 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
GMC C2500 Brake Rotor Part Number: 14026767
Product Specifications
- Other Name: Rotor, Front And Rear Wheel Brake; Disc Brake Hardware Kit; Hub & Rotor; Rotor
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1986 GMC C2500 | Base, High Sierra, Sierra Classic | 6 Cyl 4.1 L GAS, 6 Cyl 4.3 L GAS, 6 Cyl 4.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
GMC C2500 Hub & Rotor, Front Part Number: 12549136
Product Specifications
- Other Name: Rotor, Front Brake; Disc Brake Hardware Kit; Brake Rotor; Rotor; Rotor, Front And Rear Wheel Brake
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-2000 GMC C2500 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
GMC C2500 Hub & Rotor Part Number: 12547510
Product Specifications
- Other Name: Rotor, Front And Rear Wheel Brake; Brake Rotor; Rotor
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-2000 GMC C2500 | Sierra SL, Sierra SLE, Sierra SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
GMC C2500 Hub & Rotor, Front Part Number: 12547509
Product Specifications
- Other Name: Rotor, Front Brake; Disc Brake Hardware Kit; Brake Rotor; Rotor; Rotor, Front And Rear Wheel Brake
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1999 GMC C2500 | Sierra SL, Sierra SLE, Sierra SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
GMC C2500 Hub & Rotor, Front Part Number: 19195844
Product Specifications
- Other Name: Rotor Assembly, Front Brake (W/Hub); Disc Brake Hardware Kit; Brake Rotor; Rotor; Rotor, Front And Rear Wheel Brake
- Position: Front
- Replaces: 18027896, 18060221, 15981315
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-1991 GMC C2500 | Sierra, Sierra SLE, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
GMC C2500 Hub & Rotor, Front Part Number: 19152696
Product Specifications
- Other Name: Rotor Assembly, Front Brake; Disc Brake Hardware Kit; Brake Rotor; Rotor; Rotor, Front And Rear Wheel Brake
- Position: Front
- Replaces: 15691951, 18060212
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1999 GMC C2500 | Sierra SL, Sierra SLE, Sierra SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
GMC C2500 Hub & Rotor, Front Part Number: 18027868
Product Specifications
- Other Name: Rotor, Front Brake (W/Hub); Disc Brake Hardware Kit; Brake Rotor; Rotor; Rotor, Front And Rear Wheel Brake
- Position: Front
- Replaces: 18060223, 15981317
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-1996 GMC C2500 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
GMC C2500 Hub & Rotor, Front Part Number: 15981318
Product Specifications
- Other Name: Rotor, Front Brake; Disc Brake Hardware Kit; Brake Rotor; Rotor; Rotor, Front And Rear Wheel Brake
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1996 GMC C2500 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
GMC C2500 Hub & Rotor, Front Part Number: 15589422
Product Specifications
- Other Name: Rotor Assembly, Front Brake (W/Hub); Disc Brake Hardware Kit; Brake Rotor; Rotor; Rotor, Front And Rear Wheel Brake
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-1991 GMC C2500 | Sierra, Sierra SLE, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 7.4 L GAS

GMC C2500 Brake Disc

Want to cut long-term maintenance and repair costs? Choose OEM Brake Disc. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine GMC C2500 parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM GMC C2500 Brake Disc includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The GMC C2500 Brake Disc system is one of the most important parts when it comes to improving the performance and safety of the GMC C2500, which is a full-sized, a reliable pickup truck. GMC C2500 Brake Disc is made with daily use and work trivialities required, as well as heavy loads that a car must carry, therefore, braking efficiency is a matter of great importance. This system comprises of brake discs and the likes which are an essential part of high-quality brake systems this is to ensure that one's stopping power is not compromised, the GMC C2500 Brake Disc boasts of using friction compounds that offer the prime in brake solutions, especially when the car is used to tow or haul loads. As a result of being compatible with different trims of GMC C2500 such as Base, Deluxe, and Sierra, this brake system is suitable for many people. Also, the addition of the hardware like the clips and shims can complement the overall performance of the GMC C2500 Brake Disc for the extra benefits of noiselessness and wear bar. However, still, a user misses some crucial information regarding the ordering details of Buyers that GMC needs to provide with, as well as complete information about the manufacturer and parts of the GMC C2500 Brake Disc. Performance components of such a system also benefit from increased attention to detail for enhanced driving dynamics while also enhancing the safety features by extending the length of the vehicle needed to come to a complete stop. As a company committed to the delivery of durable and high performing auto parts, the GMC C2500 Brake Disc is still on the spotlight in the automobile market since it enhances the general braking system of GMC C2500 making it amongst the most sort after auto part that car owners would like to have for their vehicles.

GMC C2500 Brake Disc Parts and Q&A

Hub & Rotor, Front
19202727
Q: How to replace the front brake disc on GMC C2500?
A:
Get the job started by lifting and supporting the vehicle while draining 2/3 of the brake fluid from the master cylinder. Take out the tire first and wheel next. Both components come out as a set with the caliper and mounting bracket. Keep them suspended using sturdy wire attached to the suspension. Clean and spray penetrating oil into the hub/disc space. Insert two M10 x 1.5 jack screws into threaded disc holes and equally tighten them to push off the disc when it won't come off due to corrosion in its hub area. During installation you must clean all rust and debris from both disc faces before placing the hub flange which should have no visible damage if steel jacks were used. First add the disc and attach the caliper and its bracket together. Install this assembly plus the tire and wheel combination afterward. Afterward take away protective stands and slowly drop the vehicle.
Hub & Rotor
12547510
Q: How to replace the rear brake disc on GMC C2500?
A:
You need to release the parking brake then take out two-thirds of the brake fluid from the master cylinder before replacing the rear Brake Disc. Lift the vehicle before dismounting the tire and wheel unit. Use wire to suspend the caliper and mounting bracket assembly as one unit from the suspension after you disconnect its bolts. Untwist the disc slowly while pulling it away from the axle center. Clean both sides of the wheel and axle hub before inserting the disc and twisting it into place toward the axle. Mount back the Steering Knuckle assembly with the caliper and its holder. Clear away existing adhesive from the bolt threads before putting on new caliper mounting bracket bolts. Brush threads with brake parts cleaner until dry and let them dry naturally. Cover the bolt threads with gm threadlocker p/n 12345493 or red loctite product #272. Fasten the caliper mounting bracket bolts to the Steering Knuckle unit and torque them at 175 n.m (129 lb ft) for 15 series models while achieving 300 n.m (221 lb ft) for 25 series vehicles. Complete the process by installing the tire and wheel components, then take away the safety stands and lower the vehicle.