ChevyParts
My Garage
My Account
Cart
OEM GMC C2500 Starter
Starter Ignition- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
8 Starters found
GMC C2500 Starter
Part Number: 10465167$177.01 MSRP: $349.48You Save: $172.47 (50%)Ships in 1-2 Business Days
GMC C2500 Starter
Part Number: 10496873$91.56 MSRP: $180.92You Save: $89.36 (50%)Ships in 1-2 Business Days
GMC C2500 Starter
Part Number: 10465389$186.77 MSRP: $369.68You Save: $182.91 (50%)Ships in 1-2 Business Days
GMC C2500 Starter
Part Number: 10465065$174.73 MSRP: $315.30You Save: $140.57 (45%)Ships in 1-2 Business DaysGMC C2500 Starter
Part Number: 10465054$419.20 MSRP: $756.08You Save: $336.88 (45%)Ships in 1-2 Business Days
GMC C2500 Starter
Our website offers an extensive catalog of genuine GMC C2500 Starter at unbeatable prices. Every OEM GMC C2500 Starter comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
GMC C2500 Starter Parts Questions & Experts Answers
- Q: How to service and repair the starter motor on GMC C2500?A: The first step of servicing and repairing the Starter motor starts with disconnecting the negative Battery Cable followed by properly raising the vehicle and supporting it adequately. Remove all protective shields from the selection solenoid area before taking out the Starter to transmission close out cover bolt. Severing the engine oil level sensor cable is the first step followed by removal of the front axle mounting bracket through bolt nut when the vehicle includes four wheel drive capability. Tap the front axle mounting bracket through-bolt until its tip is perfectly aligned with the support bushing, without dislodging it. The next step requires you to take out mounting bolts from the engine block so you can move the Starter forward to timing position past the transmission. First disconnect the Starter transmission close out cover before removing the positive Battery Cable and wiring harness from the Starter to carry out the Starter replacement. After placing the Starter within the vehicle you should connect its positive Battery Cable then tighten the nut to 16 n.m (12 lb in). The Starter transmission close out cover needs to be installed along with its mounting bolts to the engine block using a torque of 50 n.m (37 lb ft). To install the front axle mounting bracket through bolt nut on vehicles with 4wd one must reposition the bracket until it reaches full seating before tightening it to 90 n.m (67 lb ft). After restoring the engine oil level sensor connection you should install the Starter through its engagement close out cover bolt followed by securing the Starter solenoid shield. Remove protective shields when needed followed by stand removal and lowering the vehicle before you fasten the negative Battery Cable bolts to 17 n.m (13 lb ft).
