OEM GMC C3500 Clutch Slave Cylinder

GMC C3500 Clutch Slave Cylinder Parts Questions & Experts Answers

• Slave Cylinder
  24264182
  Q: How to service and repair the Clutch Slave Cylinder on GMC C3500?

  A: You must remove the transmission to work on and repair the Clutch Slave Cylinder. Following this step, pull off the bolts attached to the concentric slave cylinder and extract the slave cylinder from the transmission input shaft. After, pull the bearing out of the slave cylinder. Installing the bearing onto the slave cylinder should be the first step, then attach the slave cylinder to the transmission input shaft, so that the coupling and bleed screw match the ports on the transmission. Following the fastener notice is necessary in service precautions. After that, place and tighten the two bolts that connect the concentric slave cylinder to the shaft on the clutch housing to 8 nm (71 inch lbs.). The last step is to replace the transmission.