How to replace the Engine Oil Cooler Hose/Pipe on GMC Jimmy?

To replace the Engine Oil Cooler hose/pipe, firearms, separate off the steering linkage shield, and be prepared with a drain pan for the engine oil. Then, unscrew the bolt that is tying the Engine Oil Cooler lines to the remote (frame mounted) oil filter adapter and throw away the seals. Lower your vehicle and remove the air cleaner assembly. Unscrew the Engine Oil Cooler line retaining rings from the quick connectors at the inlet and outlet ends of the radiator Engine Oil Cooler using a bent-tip screwdriver whereby you can rotate and take out any remaining retaining rings that have to be thrown away. Pull the Engine Oil Cooler lines directly out from the connector and remove them from the vehicle and make sure that the drain pan is available for trapping the oil. By removing the bolt that ties the remote engine oil filter lines to the remote engine oil filter adapter and holding the lines to drain all the oil into, throwing the seals away afterwards. The bolt that connects the remote engine oil filter lines to the engine mounted adapter can be removed and thrown away with those seals. Clean all components in a suitable solvent and dry them with compressed air, taking note for damage/obstructions and replacing parts where necessary. Drain the Engine Oil Cooler, lines, and adapters with the same type of engine oil as in the engine. For installation, insert new seals on both ends of each remote engine oil filter line and use the correct fasteners in their respective locations and fasten the bolts with 35 nm (26 lb ft). Install new seals onto the remote adapter at the Engine Oil Cooler line and tighten them with a suitable bolt that is also tightened to 35 nm (26 lb ft). Change old retaining rings with new ones, that must be correctly located at quarter connectors of radiator Engine Oil Cooler inlet and outlet. Install the Engine Oil Cooler lines onto the quick connectors making sure a click is heard or felt before reinstalling the steering linkage shield. Finally, check the engine oil level out and fill it with the correct amount, start the engine so that you can check for leaks.

OEM GMC Jimmy Oil Cooler Hose

Oil Cooler Line

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Oil Cooler Hoses found

View related parts
GMC Jimmy Pipe Part Number: 15982250
$60.20 MSRP: $90.27
You Save: $30.07 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Engine Oil Cooler
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995 GMC Jimmy | Base, SL, SLE, SLS, SLT | 6 Cyl 4.3 L GAS
View related parts
GMC Jimmy Outlet Hose Part Number: 15953703
$35.24 MSRP: $57.68
You Save: $22.44 (39%)
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Engine Oil Cooler Outlet; Oil Cooler Hose; Hose; Hose, Engine Oil Cooler
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995 GMC Jimmy | Base, SL, SLE, SLS, SLT | 6 Cyl 4.3 L GAS
View related parts
GMC Jimmy Inlet Hose Part Number: 15953702
$35.62 MSRP: $58.69
You Save: $23.07 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Engine Oil Cooler Inlet; Oil Cooler Hose; Hose; Hose, Engine Oil Cooler
- Replaces: 15716078
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995 GMC Jimmy | Base, SL, SLE, SLS, SLT | 6 Cyl 4.3 L GAS
View related parts
GMC Jimmy Hose Part Number: 15194579
$104.77 MSRP: $166.34
You Save: $61.57 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Oil Filter Inlet & Outlet; Oil Cooler Hose; Hose, Engine Oil Filter
- Replaces: 15730171, 15760334
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2001 GMC Jimmy | Base, Diamond Edition, Envoy, SL, SLE, SLS, SLT | 6 Cyl 4.3 L GAS
View related parts
GMC Jimmy Oil Cooler Hose Part Number: 15194577
$109.67 MSRP: $180.66
You Save: $70.99 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Engine Oil Cooler; Inlet Hose; Hose; Hose, Engine Oil Cooler
- Replaces: 15730170, 15757070
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2001 GMC Jimmy | Base, Diamond Edition, Envoy, SL, SLE, SLS, SLT | 6 Cyl 4.3 L GAS
View related parts
GMC Jimmy Hose Part Number: 12472200
Product Specifications
- Other Name: Hose Assembly, Engine Oil Cooler Outlet; Hose, Engine Oil Cooler
- Replaces: 15548902
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1991 GMC Jimmy | Base, High Sierra, Sierra Classic | 8 Cyl 6.2 L DIESEL
View related parts
GMC Jimmy Hose Part Number: 12472199
Product Specifications
- Other Name: Hose, Engine Oil Cooler
- Replaces: 15548901
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1991 GMC Jimmy | Base, High Sierra, Sierra Classic | 8 Cyl 6.2 L DIESEL
View related parts
GMC Jimmy Hose Part Number: 15982251
Product Specifications
- Other Name: Hose, Oil Filter Inlet & Outlet; Oil Cooler Hose; Hose, Engine Oil Filter
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995 GMC Jimmy | Base, SL, SLE, SLS, SLT | 6 Cyl 4.3 L GAS
View related parts
GMC Jimmy Hose Part Number: 12472196
Product Specifications
- Other Name: Hose Assembly, Engine Oil Cooler Outlet; Oil Cooler Hose; Hose, Engine Oil Cooler
- Replaces: 14055584
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1991 GMC Jimmy | Base, High Sierra, Sierra Classic | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View related parts
GMC Jimmy Hose Part Number: 12472195
Product Specifications
- Other Name: Hose, Engine Oil Cooler; Oil Cooler Hose
- Replaces: 14055583
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1991 GMC Jimmy | Base, High Sierra, Sierra Classic | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS

GMC Jimmy Oil Cooler Hose

Want to cut long-term maintenance and repair costs? Choose OEM Oil Cooler Hose. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine GMC Jimmy parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM GMC Jimmy Oil Cooler Hose includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The GMC Jimmy Oil Cooler Hose functions as a crucial part to improve performance and durability of GMC Jimmy vehicles. The structured Oil Cooler Hose controls engine oil temperature properly to avoid lubrication breakdowns from heat struggles. The GMC Jimmy Oil Cooler Hose works with multiple GMC Jimmy vehicle versions to move oil through the essential oil cooler unit that supports the vehicle cooling structure. GMC Jimmy utilizes transmission oil cooler lines and engine oil cooler lines as its main Oil Cooler Hose types that function in specific vehicle locations. Proper specifications about Oil Cooler Hoses fit and diameter are vital for maintaining pressure levels and leak prevention so OEM replacement standards should be followed. The GMC Jimmy Oil Cooler Hose distinguishes itself in the automotive sector because it combines sturdy building materials with dependable operation under different road conditions. Through its advanced design brand car Oil Cooler Hose increases vehicle performance and safeguards both the car vehicle and its passengers. Thus it becomes an essential element for all the automaker model owners. Continuing production demonstrates the superior quality of the car Oil Cooler Hose which makes this component a preferred choice between both automobile enthusiasts and daily drivers thus strengthening the car's reputation for reliable performance.

GMC Jimmy Oil Cooler Hose Parts Questions & Experts Answers

Oil Cooler Hose
15194577
Q: How to replace the Engine Oil Cooler Hose/Pipe on GMC Jimmy?
A:
To replace the Engine Oil Cooler hose/pipe, firearms, separate off the steering linkage shield, and be prepared with a drain pan for the engine oil. Then, unscrew the bolt that is tying the Engine Oil Cooler lines to the remote (frame mounted) oil filter adapter and throw away the seals. Lower your vehicle and remove the air cleaner assembly. Unscrew the Engine Oil Cooler line retaining rings from the quick connectors at the inlet and outlet ends of the radiator Engine Oil Cooler using a bent-tip screwdriver whereby you can rotate and take out any remaining retaining rings that have to be thrown away. Pull the Engine Oil Cooler lines directly out from the connector and remove them from the vehicle and make sure that the drain pan is available for trapping the oil. By removing the bolt that ties the remote engine oil filter lines to the remote engine oil filter adapter and holding the lines to drain all the oil into, throwing the seals away afterwards. The bolt that connects the remote engine oil filter lines to the engine mounted adapter can be removed and thrown away with those seals. Clean all components in a suitable solvent and dry them with compressed air, taking note for damage/obstructions and replacing parts where necessary. Drain the Engine Oil Cooler, lines, and adapters with the same type of engine oil as in the engine. For installation, insert new seals on both ends of each remote engine oil filter line and use the correct fasteners in their respective locations and fasten the bolts with 35 nm (26 lb ft). Install new seals onto the remote adapter at the Engine Oil Cooler line and tighten them with a suitable bolt that is also tightened to 35 nm (26 lb ft). Change old retaining rings with new ones, that must be correctly located at quarter connectors of radiator Engine Oil Cooler inlet and outlet. Install the Engine Oil Cooler lines onto the quick connectors making sure a click is heard or felt before reinstalling the steering linkage shield. Finally, check the engine oil level out and fill it with the correct amount, start the engine so that you can check for leaks.