How to replace the fuel pressure sensor on GMC Savana 2500?

The first step for Fuel Pressure Sensor replacement involves raising and supporting the vehicle. Unplug the Fuel Pressure Sensor electrical connector that is part of the chassis wiring harness. The wiring harness clip should also be detached from the fuel pipe for access. A shop towel must be used to cover the Fuel Pressure Sensor fitting before the professional removes the sensor from the fuel line and throws out the Fuel Pressure Sensor o-ring seal. To install the new Fuel Pressure Sensor o-ring seal you should apply engine oil then place it on the fuel line fitting. Secure the Fuel Pressure Sensor fitting with another shop towel to protect against fuel leakage during the process. You should install the Fuel Pressure Sensor to the fuel line while tightening it to 15 nm (11 lb ft). You should reinstall the chassis wiring harness clip to the fuel pipe while simultaneously connecting the chassis wiring harness electrical connector to the Fuel Pressure Sensor. After turning the ignition on with engine off you should lower the vehicle to inspect for fuel leaks. This procedure involves keeping the ignition on for two seconds followed by switching off the ignition for ten seconds and another two seconds of ignition on with engine off before checking for any fuel leaks.

OEM GMC Savana 2500 Fuel Pressure Sensor

Fuel Tank Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Fuel Pressure Sensors found

View related parts
GMC Savana 2500 Fuel Pressure Regulator, Passenger Side
Part Number: 16238399
$49.19 MSRP: $101.06
You Save: $51.87 (52%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Fuel Tank Pressure; Fuel Tank Pressure Sensor; Fuel Pressure Sensor; Pressure Regulator; Sensor, Early Fuel Evaporation; Fuel Gauge Sending Unit; Tank Pressure Sensor
- Position: Passenger Side
- Replaces: 12206740, 16217059, 16257276, 22678829, 09377680, 12219388, 16196060, 9377680
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2007 GMC Savana 2500 | Base, LS, LT, SLE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
GMC Savana 2500 Pressure Sensor
Part Number: 98090186
$275.46 MSRP: $559.48
You Save: $284.02 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Fuel Injection; Fuel Rail Pressure Sensor; Fuel Tank Pressure Sensor; Sensor, Computer Control Sensors
- Replaces: 97371617
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2010 GMC Savana 2500 | Base | 8 Cyl 6.6 L DIESEL
View related parts
GMC Savana 2500 Pressure Sensor, Passenger Side
Part Number: 13502903
$47.79 MSRP: $98.21
You Save: $50.42 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Kit, Fuel Tank Meter/Pump; Fuel Tank Pressure Sensor; Level Sensor; Tank Pressure Sensor; Sensor; Sensor, Early Fuel Evaporation; Sensor, Fuel Tank Meter/Pump
- Position: Passenger Side
- Replaces: 13502510
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2020 GMC Savana 2500 | Base, LS, LT | 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
GMC Savana 2500 Pressure Sensor
Part Number: 12651990
$91.15 MSRP: $185.14
You Save: $93.99 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Fuel Pressure; Fuel Injection Pressure and Tank Sensors; Sensor, Computer Control Sensors; Sensor, Fuel Tank Meter/Pump
- Replaces: 12611873
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2016 GMC Savana 2500 | Base | 8 Cyl 6.6 L DIESEL
View related parts
GMC Savana 2500 Pressure Sensor
Part Number: 12708493
$22.47 MSRP: $42.20
You Save: $19.73 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Fuel Injection; Fuel Rail Pressure Sensor; Fuel Tank Pressure Sensor; Sensor, Computer Control Sensors
- Replaces: 12684286, 12664124
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 GMC Savana 2500 | Base, LS, LT | 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 6.6 L GAS
View related parts
GMC Savana 2500 Pressure Sensor
Part Number: 13516496
$47.65 MSRP: $96.80
You Save: $49.15 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Fuel Pressure; Fuel Tank Pressure Sensor; Fuel Pressure Sensor; Tank Pressure Sensor; Sensor, Computer Control Sensors; Sensor, Fuel Tank Meter/Pump
- Replaces: 13579380
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017-2020 GMC Savana 2500 | Base, LS, LT | 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS

GMC Savana 2500 Fuel Pressure Sensor

Our website offers an extensive catalog of genuine GMC Savana 2500 Fuel Pressure Sensor at unbeatable prices. Every OEM GMC Savana 2500 Fuel Pressure Sensor comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

GMC Savana 2500 Fuel Pressure Sensor Parts Questions & Experts Answers

Pressure Sensor
12651990
Q: How to replace the fuel pressure sensor on GMC Savana 2500?
A: The first step for Fuel Pressure Sensor replacement involves raising and supporting the vehicle. Unplug the Fuel Pressure Sensor electrical connector that is part of the chassis wiring harness. The wiring harness clip should also be detached from the fuel pipe for access. A shop towel must be used to cover the Fuel Pressure Sensor fitting before the professional removes the sensor from the fuel line and throws out the Fuel Pressure Sensor o-ring seal. To install the new Fuel Pressure Sensor o-ring seal you should apply engine oil then place it on the fuel line fitting. Secure the Fuel Pressure Sensor fitting with another shop towel to protect against fuel leakage during the process. You should install the Fuel Pressure Sensor to the fuel line while tightening it to 15 nm (11 lb ft). You should reinstall the chassis wiring harness clip to the fuel pipe while simultaneously connecting the chassis wiring harness electrical connector to the Fuel Pressure Sensor. After turning the ignition on with engine off you should lower the vehicle to inspect for fuel leaks. This procedure involves keeping the ignition on for two seconds followed by switching off the ignition for ten seconds and another two seconds of ignition on with engine off before checking for any fuel leaks.