How to replace the engine oil cooler hose/pipe for a 6.0L and 8.1L engine on GMC Savana 2500?

The oil cooler features serviceable cooler lines and hoses found within or in front of the radiators separately. Replacements begin with disconnecting all lines attached to the Engine Oil Cooler hose/pipe. Engineers should remove the lower Fan Shroud hose clip on 6.0l vehicles before doing the following procedures: extracting the hoses from the clip followed by slow withdrawal of the pipe fittings from the Radiator's quick connect fittings. Raise the vehicle while applying a support then disconnect engine shield bolts before removing the engine shield. The next step includes removing the oil cooler bracket bolt and bolted adapter nuts of the cooler hose while removing both the hose assembly and retaining gasket which should be discarded. Check every fitting and connector and cooler hose for signs of damage or distortion. An 8.1l engine requires the removal of its Oil Cooler Hose bracket bolt as well as the quick connect fittings at the engine before uninstalling the Oil Cooler Hose assembly while discarding the gasket and performing a damage inspection. Installation requires hearing a distinct snap while connecting tube ends to quick connectors followed by a firm pull to confirm full insertion of the hose assembly. In the installation of the 6.0l engine, install the new gasket after fitting the Oil Cooler Hose assembly followed by applying torque of 12 nm (106 inch lbs.) to loose adapter bolts and 25 nm (18 ft. Lbs.) to the Oil Cooler Hose bracket bolt. Begin by installing engine shields followed by shield bolt tightening to 20 nm (15 ft. Lbs.). When working with a 6.0l vehicle install the oil cooler hoses to the Fan Shroud hose clip before snapping it shut while also checking that the quick connect fitting's end contains a plastic cap. Connect the oil cooler lines. When installing hoses to the clip on an 8.1l engine for the cooler lines until you hear or feel a click against the quick connect fitting then perform a sharp pull-back check.

OEM GMC Savana 2500 Oil Cooler Hose

Oil Cooler Line

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

20 Oil Cooler Hoses found

View related parts
GMC Savana 2500 Outlet Hose
Part Number: 55591980
$28.13 MSRP: $46.02
You Save: $17.89 (39%)
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Engine Oil Cooler Outlet; Hose, Engine Oil Cooler
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017-2022 GMC Savana 2500 | Base, LS, LT | 4 Cyl 2.8 L DIESEL
View related parts
GMC Savana 2500 Inlet Pipe
Part Number: 15808251
$27.54 MSRP: $45.34
You Save: $17.80 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Transmission Fluid Auxiliary Cooler Inlet; Hose, Transmission Oil Cooler; Pipe, Transmission Oil Cooler
- Replaces: 15751520, 15230697
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2020 GMC Savana 2500 | Base, LS, LT, SLE | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
View related parts
GMC Savana 2500 Oil Cooler Line
Part Number: 20832452
$61.06 MSRP: $103.98
You Save: $42.92 (42%)
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Engine Oil Cooler; Hose, Engine Oil Cooler
- Replaces: 15279845
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2020 GMC Savana 2500 | Base, LS, LT | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
View related parts
GMC Savana 2500 Outlet Pipe
Part Number: 20985357
$79.03 MSRP: $134.54
You Save: $55.51 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly-Transmission Fluid Cooler; Pipe, Transmission Oil Cooler
- Replaces: 20916869
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2020 GMC Savana 2500 | Base, LS, LT | 8 Cyl 4.8 L FLEX, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
View related parts
GMC Savana 2500 Inlet Hose
Part Number: 15052181
$55.37 MSRP: $90.66
You Save: $35.29 (39%)
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Transmission Fluid Auxiliary Cooler Inlet *Marked Print; Hose, Transmission Oil Cooler
- Replaces: 15153153
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2002 GMC Savana 2500 | Base, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
GMC Savana 2500 Outlet Pipe
Part Number: 12725092
$36.28 MSRP: $64.78
You Save: $28.50 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe, Engine Coolant; Cooler Pipe; Pipe, Engine Oil Cooler
- Replaces: 12636733, 97188664, 97328878
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2016 GMC Savana 2500 | Base | 8 Cyl 6.6 L DIESEL
View related parts
GMC Savana 2500 Hose & Tube Assembly
Part Number: 84974082
$183.45 MSRP: $288.65
You Save: $105.20 (37%)
ADD TO CART
Product Specifications
- Other Name: Pipe, Transmission Oil Cooler; Line
- Replaced by: 86826748
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021 GMC Savana 2500 | Base, LS, LT | 8 Cyl 6.6 L GAS
View related parts
GMC Savana 2500 Oil Cooler Line
Part Number: 85522975
$144.37 MSRP: $227.17
You Save: $82.80 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Engine Oil Cooler; Hose, Engine Oil Cooler
- Replaces: 15808245
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2007 GMC Savana 2500 | Base, LS, LT, SLE | 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
View related parts
GMC Savana 2500 Inlet Pipe
Part Number: 15808252
$73.78 MSRP: $126.70
You Save: $52.92 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Transmission Fluid Auxiliary Cooler Inlet; Hose, Transmission Oil Cooler
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2016 GMC Savana 2500 | Base | 8 Cyl 6.6 L DIESEL
View related parts
GMC Savana 2500 Line
Part Number: 84501968
$103.25 MSRP: $170.08
You Save: $66.83 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe, Transmission Oil Cooler; Transmission Oil Cooler Line
- Replaced by: 86531999
- Replaces: 84375051
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 GMC Savana 2500 | Base, LS, LT
View related parts
GMC Savana 2500 Outlet Pipe, Lower
Part Number: 25849124
$38.76 MSRP: $66.59
You Save: $27.83 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Transmission Fluid Cooler Lower; Hose, Transmission Oil Cooler
- Position: Lower
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009 GMC Savana 2500 | Base, LS, LT | 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L GAS
View related parts
GMC Savana 2500 Outlet Hose
Part Number: 15052182
$86.66 MSRP: $230.93
You Save: $144.27 (63%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Hose, Transmission Oil Cooler; Transmission Oil Cooler Line
- Replaces: 15153154
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2002 GMC Savana 2500 | Base, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
GMC Savana 2500 Hose & Tube Assembly
Part Number: 84780457
$183.55 MSRP: $288.81
You Save: $105.26 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly-Transmission Fluid Cooler; Transmission Oil Cooler Line; Line; Pipe, Transmission Oil Cooler
- Replaces: 84480575
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017-2022 GMC Savana 2500 | Base, LS, LT | 4 Cyl 2.8 L DIESEL
View related parts
GMC Savana 2500 Outlet Pipe, Lower
Part Number: 15808430
$59.69 MSRP: $102.44
You Save: $42.75 (42%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Transmission Fluid Cooler Lower; Hose, Transmission Oil Cooler
- Position: Lower
- Replaces: 15230701, 15751528
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2005 GMC Savana 2500 | Base, SLE | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
View related parts
GMC Savana 2500 Outlet Pipe
Part Number: 20916868
$103.33 MSRP: $177.48
You Save: $74.15 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly-Transmission Fluid Cooler; Pipe, Transmission Oil Cooler
- Replaces: 25847206
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2016 GMC Savana 2500 | Base | 8 Cyl 6.6 L DIESEL
View related parts
GMC Savana 2500 Hoses
Part Number: 24585986
$34.98 MSRP: $55.51
You Save: $20.53 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Engine Oil Cooler Inlet; Oil Cooler Hose; Oil Cooler Line; Hose, Engine Oil Cooler
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2022 GMC Savana 2500 | Base, LS, LT | 4 Cyl 2.8 L DIESEL
View related parts
GMC Savana 2500 Outlet Pipe, Lower
Part Number: 15808427
$37.38 MSRP: $61.56
You Save: $24.18 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Transmission Fluid Cooler Lower; Hose, Transmission Oil Cooler
- Position: Lower
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2008 GMC Savana 2500 | Base, LS, LT | 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L GAS
View related parts
GMC Savana 2500 Hose & Tube Assembly
Part Number: 86826748
$183.45 MSRP: $288.65
You Save: $105.20 (37%)
Product Specifications
- Other Name: Pipe, Transmission Oil Cooler; Line
- Replaces: 85584728, 84974082, 84906730
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2024 GMC Savana 2500 | Base, LS, LT | 8 Cyl 6.6 L GAS
View related parts
GMC Savana 2500 Inlet Hose
Part Number: 9439340
Product Specifications
- Other Name: Hose, Fuel & Oil 11/32"X25' Gm-6165M; Multi Purpose Hose; Overflow Hose; Engine Crankcase Ventilation, Coolant Recovery, Oil Cooler, Transfer Case; Standard Parts
- Replaces: 91175589
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2024 GMC Savana 2500 | Base, LS, LT | 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 6.6 L GAS
View related parts
GMC Savana 2500 Outlet Hose
Part Number: 15024400
Product Specifications
- Other Name: Pipe Assembly-Transmission Oil Auxiliary Cooler Outlet; Transmission Oil Cooler Line; Hose, Transmission Oil Cooler
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996 GMC Savana 2500 | Base, SLE | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL

GMC Savana 2500 Oil Cooler Hose

Our website offers an extensive catalog of genuine GMC Savana 2500 Oil Cooler Hose at unbeatable prices. Every OEM GMC Savana 2500 Oil Cooler Hose comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

GMC Savana 2500 Oil Cooler Hose Parts Questions & Experts Answers

Inlet Pipe
15808251
Q: How to replace the engine oil cooler hose/pipe for a 6.0L and 8.1L engine on GMC Savana 2500?
A: The oil cooler features serviceable cooler lines and hoses found within or in front of the Radiators separately. Replacements begin with disconnecting all lines attached to the Engine Oil Cooler hose/pipe. Engineers should remove the lower Fan Shroud hose clip on 6.0l vehicles before doing the following procedures: extracting the hoses from the clip followed by slow withdrawal of the pipe fittings from the Radiator's quick connect fittings. Raise the vehicle while applying a support then disconnect engine shield bolts before removing the engine shield. The next step includes removing the oil cooler bracket bolt and bolted adapter nuts of the cooler hose while removing both the hose assembly and retaining gasket which should be discarded. Check every fitting and connector and cooler hose for signs of damage or distortion. An 8.1l engine requires the removal of its Oil Cooler Hose bracket bolt as well as the quick connect fittings at the engine before uninstalling the Oil Cooler Hose assembly while discarding the gasket and performing a damage inspection. Installation requires hearing a distinct snap while connecting tube ends to quick connectors followed by a firm pull to confirm full insertion of the hose assembly. In the installation of the 6.0l engine, install the new gasket after fitting the Oil Cooler Hose assembly followed by applying torque of 12 nm (106 inch lbs.) to loose adapter bolts and 25 nm (18 ft. Lbs.) to the Oil Cooler Hose bracket bolt. Begin by installing engine shields followed by shield bolt tightening to 20 nm (15 ft. Lbs.). When working with a 6.0l vehicle install the oil cooler hoses to the Fan Shroud hose clip before snapping it shut while also checking that the quick connect fitting's end contains a plastic cap. Connect the oil cooler lines. When installing hoses to the clip on an 8.1l engine for the cooler lines until you hear or feel a click against the quick connect fitting then perform a sharp pull-back check.