Other Name: Absorber, Rear Shock; Shock; Absorber, Front And Rear Suspension; Absorber, Front Shock
Position: Rear
Replaces: 22064066, 22064072
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1991-1993 GMC Sonoma | Base, GT, SLE, SLS | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
| Page 1 of 2 |Next >
1-20 of 25 Results
GMC Sonoma Shock Absorber
Our website offers an extensive catalog of genuine GMC Sonoma Shock Absorber at unbeatable prices. Every OEM GMC Sonoma Shock Absorber comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
GMC Sonoma Shock Absorber Parts Questions & Experts Answers
A: Vehicle replacement of a shock absorber begins with vehicle elevation and support and continues with tire and wheel removal. You should remove the lower mounting nut and bolt of the shock absorber before taking off the upper mounting nuts and bolts to extract the shock absorber. Place the shock absorber on the bracket followed by installing upper and lower shock absorber bolts which must face the proper direction. The proper method for shock absorber mounting nut and bolt tightening requires performing this procedure on a loaded front suspension until reaching 73 Nm (54 ft. lbs.) torque for both upper and lower mounting nuts. Finish the process by lowering the vehicle but make sure to properly install the wheel along with its tire.