How to replace the engine flywheel on GMC Yukon XL 1500?

Question

Accepted Answer

The first step in engine Flywheel replacement involves automatic transmission removal together with recording the orientation and direction of the Flywheel until complete removal. You must disconnect all engine Flywheel bolts together with any automatic transmission engine Flywheel that exists. Remove the clutch by paying attention to how the engine Flywheel is oriented while removing both engine Flywheel bolts and the manual transmission engine Flywheel when they are present. Add two m11x1.5 mm bolts to the threaded holes of the spacer if available and turn them clockwise to eliminate the spacer from the Crankshaft rear position. Install the spacer to the Crankshaft rear before adding manual transmission engine flywheels when needed followed by automatic transmission engine flywheels, while using longer bolts for flywheels that employ a spacer system. The Flywheel bolt threads must receive gm p/n 12345382 threadlock equivalent solution before installing the engine Flywheel bolts. The engine Flywheel bolt installation requires a sequence of tightening torque starting at 20 nm (15 ft. Lbs.) for the first pass then moving to 50 nm (37 ft. Lbs.) for the second pass until it reaches 100 nm (74 ft. Lbs.) during the final step. Use the clutch before mounting the automatic transmission when manual transmission is part of the vehicle.

OEM GMC Yukon XL 1500 Flywheel

4 Flywheels found

GMC Yukon XL 1500 Drive Plate Part Number: 12654640

GMC Yukon XL 1500 Drive Plate Part Number: 12621399

GMC Yukon XL 1500 Flywheel Part Number: 12561680

GMC Yukon XL 1500 Drive Plate Part Number: 19117204

GMC Yukon XL 1500 Flywheel

GMC Yukon XL 1500 Flywheel Parts Questions & Experts Answers

Related GMC Yukon XL 1500 Parts

Browse GMC Yukon XL 1500 Flywheel by Years