ChevyParts
My Garage
My Account
Cart
OEM GMC Yukon XL 2500 Fuel Filler Hose
- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
8 Fuel Filler Hoses found
GMC Yukon XL 2500 Fuel Filler Hose
Our website offers an extensive catalog of genuine GMC Yukon XL 2500 Fuel Filler Hose at unbeatable prices. Every OEM GMC Yukon XL 2500 Fuel Filler Hose comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
GMC Yukon XL 2500 Fuel Filler Hose Parts Questions & Experts Answers
- Q: How to replace the Fuel Filler Hose in a single tank system on GMC Yukon XL 2500?A: A single tank system requires cleaning up the fuel connections together with surrounding areas to avoid contamination before removing the fuel fill cap. Initialize the replacement of the Fuel Tank filler housing after extracting the torx(r) screws and retainer that binds the housing framework to the body structure. Proceed with taking out the spare tire stowage lock cylinder together with removing the spare tire when necessary. First unscrew all the hardware which maintains the Fuel Tank filler housing union to the Fuel Tank fill pipe. Properly elevate and sustain the automobile. Open the vent hose clip at the fill pipe while you detach the hose from its connection. The technician should detach the air suspension hose from its point at the fill pipe whenever necessary. First remove the ground wire harness bolt and detach both the ground wire and fill pipe ground strap before continuing. Completely remove the Fuel Tank vent hose quick connection at its Fuel Tank location before releasing the fuel fill pipe clamp and removing the fuel fill pipe bracket screws. The first step is to disconnect both the hoses for the fuel fill pipe from the Fuel Tank before removing the hose and pipe while sealing the Fuel Tank opening to avoid contamination. The installation starts by removing the Fuel Tank cap then pushing the fuel fill pipe hose onto the Fuel Tank while placing bracket bolts on correctly and tightening them to 12 n.m (106 lb in). Connect the vent hose quick connect fitting to the tank after it reaches 2.5 n.m (22 lb in) and the fuel fill pipe hose clamp tension. Position the fill pipe ground strap while attaching the ground wire then install the ground wire harness bolt which should be tightened to 9 n.m (80 lb in). Reconnect the air suspension hose at the fill pipe first and after that attach the vent hose to its clip before securing it. Install the Fuel Tank filler housing to Fuel Tank fill pipe screws along with torx(r) screws and retainer to the body; tighten all screws to 2.3 n.m (20 lb in). Complete the procedure by replacing the fuel fill cap and if needed reinstall the spare tire and the spare tire stowage lock cylinder.
Related GMC Yukon XL 2500 Parts
GMC Yukon XL 2500 Crankcase Breather Hose
GMC Yukon XL 2500 Daytime Running Light Relay
GMC Yukon XL 2500 Fuel Filler Housing
GMC Yukon XL 2500 Fuel Pressure Sensor
GMC Yukon XL 2500 Fuel Pump
GMC Yukon XL 2500 Fuel Pump Gasket
GMC Yukon XL 2500 Fuel Pump Seal
GMC Yukon XL 2500 Fuel Tank Filler Neck
GMC Yukon XL 2500 Fuel Tank Lock Ring
GMC Yukon XL 2500 Fuel Tank Sending Unit
GMC Yukon XL 2500 Throttle Cable
GMC Yukon XL 2500 Vapor Pressure Sensor