How to replace the Electronic Suspension Control Module on GMC Yukon XL 2500?

You should start by removing the right side interior trim panel when you need to replace the electronic suspension control module in Tahoe, Yukon or Escalade models. Start by removing the module from the bracket after disconnecting its electrical connectors along with removing its screw. Put the new module inside the bracket then fasten the screw before tightening it to 1.6 Nm (14 inch lbs.). You should reattach all electrical connectors to their corresponding location on the module. Module replacement requires special calibration through a scan tool connected to the data link connector and activation of the ignition ON while the engine rests followed by module selection under special functions. Follow the instructions on the scan tool alongside techline terminal to complete rtd module programming from the special functions choice on recalibration. Users should access special functions from the scan tool after programming where they must perform the alc trimset following the instructions displayed on the screen. Complete the right side interior trim panel installation at the end of the procedure.

OEM GMC Yukon XL 2500 Suspension Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Suspension Control Modules found

View related parts
GMC Yukon XL 2500 Control Module Part Number: 25971218
$417.04 MSRP: $748.05
You Save: $331.01 (45%)
ADD TO CART
Product Specifications
- Other Name: Module Assembly-Electronic Suspension Control; Suspension Control Module; Module, Electronic Control Suspension
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2013 GMC Yukon XL 2500 | SLE, SLT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
View related parts
GMC Yukon XL 2500 Control Module Part Number: 25971217
$473.30 MSRP: $852.80
You Save: $379.50 (45%)
ADD TO CART
Product Specifications
- Other Name: Module Assembly-Electronic Suspension Control; Suspension Control Module; Module, Electronic Control Suspension
- Replaces: 15893732
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2013 GMC Yukon XL 2500 | SLE, SLT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
View related parts
GMC Yukon XL 2500 Control Module Part Number: 15095294
$398.68 MSRP: $773.76
You Save: $375.08 (49%)
ADD TO CART
Product Specifications
- Other Name: Module, Electronic Control Suspension; Suspension Control Module
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007 GMC Yukon XL 2500 | SLE, SLT | 8 Cyl 6.0 L GAS
View related parts
GMC Yukon XL 2500 Control Module Part Number: 15189546
Product Specifications
- Other Name: Module, Electronic Control Suspension
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2006 GMC Yukon XL 2500 | SLE, SLT | 8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS

GMC Yukon XL 2500 Suspension Control Module

Want to cut long-term maintenance and repair costs? Choose OEM Suspension Control Module. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine GMC Yukon XL 2500 parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM GMC Yukon XL 2500 Suspension Control Module includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

GMC Yukon XL 2500 Suspension Control Module Parts and Q&A

Control Module
15189546
Q: How to replace the Electronic Suspension Control Module on GMC Yukon XL 2500?
A:
You should start by removing the right side interior trim panel when you need to replace the electronic suspension control module in Tahoe, Yukon or Escalade models. Start by removing the module from the bracket after disconnecting its electrical connectors along with removing its screw. Put the new module inside the bracket then fasten the screw before tightening it to 1.6 Nm (14 inch lbs.). You should reattach all electrical connectors to their corresponding location on the module. Module replacement requires special calibration through a scan tool connected to the data link connector and activation of the ignition ON while the engine rests followed by module selection under special functions. Follow the instructions on the scan tool alongside techline terminal to complete rtd module programming from the special functions choice on recalibration. Users should access special functions from the scan tool after programming where they must perform the alc trimset following the instructions displayed on the screen. Complete the right side interior trim panel installation at the end of the procedure.