Make sure this part fits

GM 10310747
Actuator

2001-2004 GM

Customer Questions & Expert Answers (6)
GM 10310747 Actuator
  • Part Description
    Actuator, Air Conditioner Control; HVAC Heater Blend Door Actuator; HVAC Blend Door Actuator
  • Replaces
    10430102
  • Manufacturer
    General Motors
Make sure this part fits
$63.47 MSRP: $119.20
You Save: $55.73 (47%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number10310747
    Part DescriptionActuator, Air Conditioner Control; HVAC Heater Blend Door Actuator; HVAC Blend Door Actuator
    Other NamesActuator, A/C Control
    Item Dimensions4.9 x 4.2 x 2.8 inches
    Item Weight0.60 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces10430102
    ManufacturerGeneral Motors
    SKU10310747
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2001-2004 Chevrolet VentureBase, LS, LT, Plus, Value, Warner Bros.6 Cyl 3.4 L GAS
    2001-2004 Oldsmobile SilhouetteGL, GLS, Premiere6 Cyl 3.4 L GAS
    2001-2004 Pontiac MontanaBase6 Cyl 3.4 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is this 10310747 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 10310747 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Blend Door Actuator on Chevrolet Venture? Posted by Customer
    A:
    Remove the knee bolster in order to replace the air temperature actuator. Depending on the model of the vehicle, you may need to specify the zone of the air-conditioned system. Set hvac controls to the vent mode to locate the defroster door lever that is required for access into air temperature actuator. Next, disconnect and remove the temperature door lever bolt from hvac module, disconnect and remove the temperature door lever spring , disconnect and remove the temperature door lever of the temperature door. Remove the mounting screws to remove the air temperature actuator by disconnecting the air temperature actuator electrical connector. For installation, first of all, you should install a new air temperature actuator and fix it using mounting screws and tighten it to 1.6 n.m (14 lb in). Make the connection for the air temperature actuator wire, then install the temperature door lever on the temperature door and make sure its pin is located at the slot in the lever. Connect the temperature door lever spring to the temperature door lever and the hvac module case, and install the temperature door lever bolt to the hvac module case and tighten it to 0.9 n.m (8 lb in.). Finally, reinstall the knee bolster.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after disconnecting the electrical connector for the 2002 Chevrolet Venture? Posted by Customer
    A:
    Next, remove the retaining screws for the actuator and disengage the actuator linkage by rotating it toward the steering column to take out the actuator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What should be done after securing the actuator for the 2004 Chevrolet Venture? Posted by Customer
    A:
    Connect the electrical connector, then install the left hand temperature door lever onto the left hand temperature door, ensuring the pin on the actuator aligns with the slot in the lever.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    How do you attach the right hand temperature lever for the 2003 Chevrolet Venture? Posted by Customer
    A:
    Attach the right hand temperature lever to the right hand temperature door, ensuring the pin on the actuator aligns with the slot in the lever.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What is the final step after installing the actuator for the 2001 Chevrolet Venture? Posted by Customer
    A:
    Reinstall the left IP insulator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 10310747, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 10310747 Actuator. It is sometimes referred to as GM Blend Door Actuator. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 10310747 Actuator. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery