Make sure this part fits

GM 10307412
Compressor Hose

2000-2005 GM

Customer Questions & Expert Answers (6)
GM 10307412 Compressor Hose
  • Part Description
    Hose, Air Conditioner Compressor; A/C Refrigerant Liquid Hose; A/C Hose
  • Manufacturer
    General Motors
Make sure this part fits
$92.47 MSRP: $173.66
You Save: $81.19 (47%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number10307412
    Part DescriptionHose, Air Conditioner Compressor; A/C Refrigerant Liquid Hose; A/C Hose
    Other NamesSuction Hose; Compressor & Condenser Hose; Hose, A/C Compressor
    Item Dimensions34.5 x 6.3 x 1.4 inches
    Item Weight1.30 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU10307412
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2000-2005 Chevrolet VentureBase, LS, LT, Plus, Value, Warner Bros.6 Cyl 3.4 L GAS
    2000-2004 Oldsmobile SilhouetteGL, GLS, Premiere6 Cyl 3.4 L GAS
    2000-2005 Pontiac MontanaBase6 Cyl 3.4 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is this 10307412 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 10307412 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to service and repair the A/C Hose using the A/C Line Repair Kit (J 41425) on Chevrolet Venture? Posted by Customer
    A:
    Service and repair of the heater and A/C pipe requires the A/C Line Repair Kit (J 41425) for all cases of rub-through or collision damage or leakage in rear A/C or heater lines while performing sectional repairs as opposed to rebuilding the entire unit. Maintain the needed minimum length section within the straight part of the line at both ends of the splice. Begin by recuperating the refrigerant and draining the coolant if required before raising and supporting the vehicle. Use a tubing cutter to cut through the damaged section before removing it then obtain replacement line of equal length. Prepare the line ends with LOK prep sealant after you clean the burrs or grease from the ends using provided cleaning pad from the A/C Line Repair Kit (J 41425). Tooth each LOK fitting with a drop of sealing compound (J 41425-3) before placing the lines into the connectors then turn the fitting for even distribution of the sealing compound. The kit (J 41425-1) requires proper LOK fitting jaws for installation before positioning them on LOK connectors. Tighten the forcing screw until the collars reach their stop point at the center shoulder of the fitting. Check the line installation before lowering the vehicle while also performing a coolant refill if draining occurred together with evaporative and pressure charging for the repaired A/C lines. A procedure similar to pipe tapping must be performed for line sectioning by staggered spliced connections and complete consistency with replacement segment measurements.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be applied to the line ends before inserting them into the LOK fitting for the 2005 Chevrolet Venture? Posted by Customer
    A:
    Prep the line ends with LOK prep sealant and apply one drop of the J 41425-3 sealing compound to each end.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Hose
    Q:
    What should be ensured regarding the line length during repairs for the 2001 Chevrolet Venture? Posted by Customer
    A:
    The correct minimum length must remain in the straight part of the line on both sides of the splice.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Hose
    Q:
    What should be done after lowering for the 2002 Chevrolet Venture? Posted by Customer
    A:
    Evacuate and recharge the A/C system, then perform a leak test on the fittings using the Halogen Leak Detector (J 39400-A) and reconnect the negative battery cable.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Hose
    Q:
    What should be done with the new O-ring seals before installation for the 2000 Chevrolet Venture? Posted by Customer
    A:
    Lightly coat the new O-ring seals with mineral base 525 viscosity refrigerant oil, ensuring none enters the refrigerant system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Hose
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 10307412, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 10307412 Compressor Hose. It is sometimes referred to as GM A/C Hose. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 10307412 Compressor Hose. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery