Make sure this part fits

GM 26057019
Pitman Arm

1990-2005 GM

Customer Questions & Expert Answers (7)
GM 26057019 Pitman Arm
  • Part Description
    Arm Kit, Pitman; Idler Arm
  • Replaces
    26015460
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number26057019
    Part DescriptionArm Kit, Pitman; Idler Arm
    Other NamesArm Kit, Steering Pitman
    Item Dimensions10.9 x 4.7 x 2.2 inches
    Item Weight3.10 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces26015460
    ManufacturerGeneral Motors
    SKU26057019
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    1990-2005 Chevrolet AstroBase, CL, CS, LS, LT4 Cyl 2.5 L GAS, 6 Cyl 4.3 L GAS
    1990-2005 GMC SafariBase, GT, SL, SLE, SLT, SLX4 Cyl 2.5 L GAS, 6 Cyl 4.3 L GAS
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 26057019 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 26057019 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the pitman arm on Chevrolet Astro? Posted by Customer
    A:
    Before replacing the Pitman Arm use these essential tools: Pitman Arm puller (J 29107-A). Start by lifting the vehicle and taking off the tire together with the wheel. The first task involves removing power steering gear components followed by detachment of the Pitman Arm retaining nut together with its washer while performing marks on the Pitman Arm and pitman shaft for future alignment. The correct procedure for this step involves refraining from using hammers against the Pitman Arm and Pitman Arm shaft and puller to protect the components from harm. The Pitman Arm separation requires the Pitman Arm puller (J 29107-A) tool alongside an inspection of damaged ball stud threads along with degrading seals on the ball stud. Wipe away debris from the ball stud threads as well as its accompanying ball stud nut threads. The installation of the Pitman Arm requires the marks made on it during removal for correct alignment with the pitman shaft. Put the washer onto the Pitman Arm followed by the retaining nut and torque it to 250 newton meters (185 foot lbs) before replacing the power steering gear below the vehicle.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be removed from the idler arm for the 2000 Chevrolet Astro? Posted by Customer
    A:
    Remove the two bolts from the idler arm and the prevailing torque nut from the idler arm ball stud, discarding the nut.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Idler Arm
    Q:
    What tools are required to service and repair the Pitman Arm for the 2001 Chevrolet Astro? Posted by Customer
    A:
    Pitman Arm Puller (J 29107-A).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Pitman Arm
    Q:
    What should be done after installing the relay rod for the 2001 GMC Safari? Posted by Customer
    A:
    Remove the Steering Linkage Installer (J 29193) and install a new prevailing torque nut on the idler arm ball stud, tightening it to 47 Nm (35 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Idler Arm
    Q:
    What tool is used to attach the connecting rod ball stud to the pitman arm for the 2000 GMC Safari? Posted by Customer
    A:
    Use the Steering Linkage Installer (J 29193).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Pitman Arm
    Q:
    What is the installation process for the idler arm for the 2002 GMC Safari? Posted by Customer
    A:
    Attach the idler arm to the frame, install the bolts, and tighten them to 105 Nm (77 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Idler Arm
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 26057019, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 26057019 Pitman Arm. It is sometimes referred to as GM Idler Arm, GM Pitman Arm. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 26057019 Pitman Arm. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery