GM 23197327
Front Cable

Begin the replacement procedure of the Parking Brake Front Cable by elevating and sustaining the vehicle. Turn loose the park brake cable locknut at the equalizer until cable tension drops before disconnecting the front cable from the rear cable connection. Remove the front park brake cable from the park brake cable bracket on the body by compressing the locking tabs on the cable conduit through use of the J-37043 (Parking Brake Cable Release Tool). The left body hinge pillar trim panel must be removed to expose the front park brake cable routing clip during the process of releasing it from the floor stud. First separate the front park brake cable pass-through grommet and eliminate the connection of the front park brake cable to the park brake pedal clevis . You can remove both the front park brake cable from its pedal assembly by pressing on locking tabs of the cable conduit before taking out the complete front park brake cable assembly. Begin by mounting the front park brake cable assembly and attaching its terminal to the park brake pedal clevis . Secure the cable at the park brake pedal assembly with special consideration for engaging all locking tabs on the cable conduit. Follow this procedure to run the front park brake cable through the floor while seating the grommet followed by installing the routing clip that connects to floor stud and driver floor carpet. Close the left side body hinge pillar trim panel after connecting its electrical warning indicator switch. The last step involves mounting the front park brake cable onto the body bracket followed by ensuring proper locking engagement of the cable conduit tabs then linking the cable with the rear brake component before park brake adjustment.

Tighten to 25 Nm (18 lb ft).

First, release the park brake and raise the vehicle.