Make sure this part fits

GM 89047743
Caliper

2004-2009 GM

Customer Questions & Expert Answers (11)
GM 89047743 Caliper
  • Part Description
    Caliper Assembly, Rear Brake; Brake Caliper
  • Position
    Rear
  • Manufacturer
    General Motors
Make sure this part fits
$243.04 MSRP: $413.79
You Save: $170.75 (42%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2007 Cadillac CTSV8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
    2006-2009 Cadillac STSV8 Cyl 4.4 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is 89047743 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 89047743 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done if reusing the caliper pin bolts for the 2007 Cadillac STS? Posted by Customer
    A:
    Clean the threads and holes with denatured alcohol, then apply threadlocker GM P/N 12345493 (Canadian P/N 10953488) to 2/3 of the threaded length of the lower caliper bracket bolts and allow it to cure for about 10 minutes.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be inspected and cleaned during the process for the 2005 Cadillac CTS? Posted by Customer
    A:
    Inspect the brake caliper mounting bracket and clean the piston bores and seals with denatured alcohol.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be done with the copper brake hose gaskets for the 2007 Cadillac CTS? Posted by Customer
    A:
    Discard the 2 copper brake hose gaskets.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be done after removing the bleeder valve cap and bleeder valve for the 2006 Cadillac CTS? Posted by Customer
    A:
    Clean the brake caliper piston bores and seals with denatured alcohol, inspecting for any damage or corrosion.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What is the first step in the process for the 2004 Cadillac CTS? Posted by Customer
    A:
    Begin by removing the brake caliper from the vehicle, ensuring to pad the interior of the caliper housing with clean cloths during piston removal.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be done after tightening the brake caliper bolts for the 2004 Cadillac CTS? Posted by Customer
    A:
    Install the tire and wheel, lower the vehicle, and fill the master cylinder to the proper level.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What is the next step after tightening the brake hose fitting bolt for the 2009 Cadillac STS? Posted by Customer
    A:
    Bleed the hydraulic brake system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be done with the old piston dust boot seal and piston seal after removal for the 2007 Cadillac STS? Posted by Customer
    A:
    Discard them.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What is the final step after installing the dust boot seal for the 2006 Cadillac STS? Posted by Customer
    A:
    Install the caliper back onto the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What is the first step in replacing the rear brake caliper for the 2008 Cadillac STS? Posted by Customer
    A:
    Inspect the fluid level in the brake master cylinder reservoir; if it is above the midway point between the maximum-full and minimum allowable levels, remove fluid to that midway point.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Caliper 89047743 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 89047743 Caliper is available in the market under the name GM Brake Calipers. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 89047743 Caliper fits certain Cadillac CTS, STS models.
The original GM component designated by manufacturer part number 89047743 maintains top performance when functioning as the Caliper Assembly, Rear Brake; Brake Caliper unit at its Rear. The component 89047743 is constructed from durable material and its dimensions span 13.3 x 11.0 x 7.5 inches while weighing 5.70 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Caliper, Wheel Brake Cylinder/Caliper. The part 89047743 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.