Make sure this part fits

GM 89060222
Caliper

2005-2011 GM

Customer Questions & Expert Answers (10)
GM 89060222 Caliper
  • Part Description
    Caliper Assembly, Rear Brake; Brake Caliper
  • Position
    Rear
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number89060222
    Part DescriptionCaliper Assembly, Rear Brake; Brake Caliper
    Other NamesCaliper, Wheel Brake Cylinder/Caliper
    Item Dimensions9.3 x 5.2 x 14.1 inches
    Item Weight4.40 Pounds
    PositionRear
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU89060222
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2006-2007 Cadillac CTSBase, V6 Cyl 2.8 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 6.0 L GAS
    2005-2011 Cadillac STSBase, Platinum, V6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is 89060222 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 89060222 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be applied to the brake caliper pin for the 2007 Cadillac CTS? Posted by Customer
    A:
    A thin coat of high-temperature silicone brake lubricant.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    How are the piston dust boot seal and piston seal removed for the 2006 Cadillac CTS? Posted by Customer
    A:
    Use a small wooden or plastic tool.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    How should the brake caliper piston bore and seal counter-bore be cleaned for the 2006 Cadillac STS? Posted by Customer
    A:
    Clean with denatured alcohol and dry both with non-lubricated, filtered air.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be ensured during installation for the 2007 Cadillac STS? Posted by Customer
    A:
    Ensure the caliper guide pin boots are properly seated.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    How should the brake caliper piston bore and seal counter-bore be cleaned for the 2005 Cadillac STS? Posted by Customer
    A:
    Clean them with denatured alcohol and dry them with non-lubricated, filtered air.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be done after installing the brake caliper bolts for the 2009 Cadillac STS? Posted by Customer
    A:
    Remove the plug from the brake caliper opening and the brake hose.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    How do you bleed the hydraulic brake system for the 2010 Cadillac STS? Posted by Customer
    A:
    Gradually apply the brake pedal to approximately 2/3 of its travel distance with the engine off, then slowly release it, repeating until a firm pedal is obtained.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What is the torque specification for the caliper pin bolts for the 2008 Cadillac STS? Posted by Customer
    A:
    Install and tighten them to 60 N.m (44 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    How should the interior of the caliper housing be prepared during piston removal for the 2007 Cadillac STS? Posted by Customer
    A:
    Use clean cloths to pad the interior of the caliper housing.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 89060222, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 89060222 Caliper. It is sometimes referred to as GM Brake Calipers. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 89060222 Caliper. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Cadillac parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery