Make sure this part fits

GM 89060223
Overhaul Kit

2003-2011 GM

Customer Questions & Expert Answers (15)
GM 89060223 Overhaul Kit
  • Part Description
    Caliper Kit, Rear Brake; Brake Caliper Repair Kit; Disc Brake Hardware Kit
  • Position
    Rear
  • Manufacturer
    General Motors
Make sure this part fits
$10.65 MSRP: $20.00
You Save: $9.35 (47%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2007 Cadillac CTSBase, Luxury, Luxury Sport6 Cyl 2.8 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.6 L GAS
    2005-2011 Cadillac STSBase, Platinum, V6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is 89060223 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 89060223 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How are the piston dust boot seal and piston seal removed for the 2005 Cadillac CTS? Posted by Customer
    A:
    Use a small wooden or plastic tool to remove and discard them.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be done if there is damage to the caliper bore or piston for the 2003 Cadillac CTS? Posted by Customer
    A:
    Replace the caliper assembly if cracks, scoring, pitting, or excessive corrosion are present.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What is the torque specification for tightening the caliper pin bolts for the 2003 Cadillac CTS? Posted by Customer
    A:
    Tighten them to 63 N.m (46 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be ensured about the piston seal during installation for the 2004 Cadillac CTS? Posted by Customer
    A:
    Ensure the seal is not twisted, lubricate the brake caliper bore and piston, and install the caliper piston into the bore.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What do you do after compressing the caliper piston for the 2004 Cadillac CTS? Posted by Customer
    A:
    Loosen the brake caliper pin bolts while holding the brake caliper guide pin with a wrench, then remove the pin bolts and the brake caliper from the mounting bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What is the next step after raising and supporting the 2007 Cadillac CTS? Posted by Customer
    A:
    Remove the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be done if damage or corrosion is found for the 2006 Cadillac CTS? Posted by Customer
    A:
    Replace the caliper assembly if necessary.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be installed before tightening the brake hose fitting bolt for the 2009 Cadillac STS? Posted by Customer
    A:
    New copper brake hose gaskets.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be ensured during installation for the 2007 Cadillac STS? Posted by Customer
    A:
    Ensure the caliper guide pin boots are properly seated.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    How should the interior of the caliper housing be prepared during piston removal for the 2007 Cadillac STS? Posted by Customer
    A:
    Use clean cloths to pad the interior of the caliper housing.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    How do you install the new brake caliper for the 2008 Cadillac STS? Posted by Customer
    A:
    Install the new brake caliper onto the bracket, ensuring the threads of the caliper pin bolts and bracket holes are clean.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be done after compressing the caliper pistons for the 2010 Cadillac STS? Posted by Customer
    A:
    Remove the brake hose to caliper bolt and the brake hose from the caliper, discarding the two copper brake hose gaskets, and plug the openings to prevent fluid loss.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    How should the new piston dust boot seal be installed for the 2006 Cadillac STS? Posted by Customer
    A:
    Install it over the piston using the J8092 and J46275 to fully seat the dust boot seal into the caliper, ensuring it is properly seated in the groove.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What is the first step in servicing the rear brake caliper for the 2005 Cadillac STS? Posted by Customer
    A:
    Remove the brake caliper from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Overhaul Kit 89060223 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 89060223 Overhaul Kit is available in the market under the name GM Brake Calipers. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 89060223 Overhaul Kit fits certain Cadillac CTS, STS models.
The original GM component designated by manufacturer part number 89060223 maintains top performance when functioning as the Caliper Kit, Rear Brake; Brake Caliper Repair Kit; Disc Brake Hardware Kit unit at its Rear. The component 89060223 is constructed from durable material and its dimensions span 7.1 x 4.2 x 4.2 inches while weighing 1.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Caliper Kit, Wheel Brake Cylinder/Caliper. The part 89060223 has available replacement options. Each vehicle needs 2 units of the part marked as SKU 89060223. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.