Make sure this part fits

GM 19259474
Carrier Cover

2006-2013 Chevrolet Corvette

Customer Questions & Expert Answers (6)
GM 19259474 Carrier Cover
GM 19259474 Carrier Cover
  • Part Description
    Cover, Differential Carrier; Differential Cover
  • Replaces
    19181856, 19133199
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number19259474
    Part DescriptionCover, Differential Carrier; Differential Cover
    Other NamesCover, Differential(Ring Gear And Pinion)
    Item Dimensions15.2 x 11.2 x 6.0 inches
    Item Weight5.80 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces19181856, 19133199
    ManufacturerGeneral Motors
    SKU19259474
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2006-2013 Chevrolet Corvette427 Limited Edition Z06, Z06, Z06 Carbon, ZR18 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is this 19259474 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19259474 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Differential Cover and seal on the left side (W/O RPO KNR) on Chevrolet Corvette? Posted by Customer
    A:
    To install the Differential carrier cover and seal on the left side (W/O RPO KNR), accordingly, lift and support the vehicle, takeaways the lh rear tire and wheel assembly. Then remove the lh wheel drive shaft and lh Muffler assembly. Drain the fluid from the Differential, hold the Differential, and take out the left Differential mount. Clean all the dirt and debris on the outside of the Differential cover, take out the two bolts that hold the Differential cover in place and push out the dowel pin to remove the cover. Do not dump the magnet on the bottom of the Differential case, and remove and dump the o-ring seal and the axle seal from the Differential side cover. Clean the Differential cover o-ring sealing surface and the Differential housing, and then slide in a new o-ring seal to the Differential cover. Install the Differential cover, putting in the dowel pin and the two retaining bolts, tighten them to 28nm (20 lb ft). Leave the left Differential mount bolt tightened to 50 nm (37 lb ft) and install the axle seal to the Differential cover using j 46405. Fill the Differential with the proper fluids to the correct level and reinstall the lh Muffler assembly, the lh wheel drive shaft, and the lh rear tire and wheel assembly before lowering the vehicle.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done before reinstalling the differential cover for the 2006 Chevrolet Corvette? Posted by Customer
    A:
    Clean the O-ring sealing surface on both the differential cover and the differential housing, then install a new O-ring to the differential cover.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Differential Cover
    Q:
    What is the next step after removing the differential cover for the 2010 Chevrolet Corvette? Posted by Customer
    A:
    Discard the axle seal.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Differential Cover
    Q:
    What components should be reinstalled before lowering for the 2008 Chevrolet Corvette? Posted by Customer
    A:
    The LH muffler assembly, the LH wheel drive shaft, and the LH rear tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Differential Cover
    Q:
    What should be done with the axle seal for the 2007 Chevrolet Corvette? Posted by Customer
    A:
    Discard the axle seal.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Differential Cover
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 19259474, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 19259474 Carrier Cover. It is sometimes referred to as GM Differential Cover. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 19259474 Carrier Cover. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery