ChevyParts
My Garage
My Account
Cart
OEM 2008 Chevrolet Corvette Differential Cover
- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
8 Differential Covers found
Product Specifications- Other Name: Cover, Differential Carrier; Differential Cover; Cover, Differential(Ring Gear And Pinion)
- Replaces: 19181856, 19133199
- Item Weight: 5.80 Pounds
- Item Dimensions: 15.2 x 11.2 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19259474
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Cover; Differential Cover; Cover, Differential(Ring Gear And Pinion)
- Position: Passenger Side
- Item Weight: 5.80 Pounds
- Item Dimensions: 14.7 x 10.4 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89060173
- Warranty: This genuine part is guaranteed by GM's factory warranty.
- Product Specifications
- Other Name: Cover; Differential Cover; Cover, Differential(Ring Gear And Pinion)
- Position: Passenger Side
- Replaces: 19133255, 89060174
- Item Weight: 7.40 Pounds
- Item Dimensions: 6.8 x 16.5 x 12.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89059221
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Cover; Differential Cover; Cover, Differential(Ring Gear And Pinion)
- Position: Rear Driver Side
- Item Weight: 6.60 Pounds
- Item Dimensions: 17.3 x 11.4 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19132920
- Warranty: This genuine part is guaranteed by GM's factory warranty.
- Product Specifications
- Other Name: Cover; Differential Cover; Cover, Differential(Ring Gear And Pinion)
- Position: Rear Driver Side
- Item Weight: 6.50 Pounds
- Item Dimensions: 15.2 x 10.1 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19132926
- Warranty: This genuine part is guaranteed by GM's factory warranty.
- Product Specifications
- Other Name: Cover; Differential Cover; Cover, Differential(Ring Gear And Pinion)
- Position: Rear Driver Side
- Item Weight: 5.80 Pounds
- Item Dimensions: 18.3 x 13.3 x 9.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19132931
- Warranty: This genuine part is guaranteed by GM's factory warranty.
- Product Specifications
- Other Name: Cover; Differential Cover; Cover, Differential(Ring Gear And Pinion)
- Position: Rear Driver Side
- Item Weight: 5.60 Pounds
- Item Dimensions: 14.1 x 10.3 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19132930
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Cover, Rear Axle Housing
- Position: Rear
- Item Weight: 0.70 Pounds
- Item Dimensions: 8.9 x 9.0 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12458079
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2008 Chevrolet Corvette Differential Cover
With a comprehensive array of OEM 2008 Chevrolet Corvette Differential Cover, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Corvette Differential Cover are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2008 Chevrolet Corvette Parts Questions & Experts Answers
- Q: How to replace the LH Differential Cover and seal on 2008 Chevrolet Corvette?A: To replace the differential carrier cover and seal on the left, raise and support the vehicle, remove lh rear tire and wheel assembly. Then remove the lh wheel drive shaft and the lh Muffler assembly. Drain the fluid out of the differential, and then remove damper/tuned absorber bolts and the damper/tuned absorber also. Loosen the nut holding the transmission to the transmission lh mounting stud, install a second nut to the stud, and remove the stud from the Differential Cover (left). Clean everything around the Differential Cover (left), then remove the two diff cover-plug bolts (left), and lift off the cover (left) then remove the oil plug and drain out the oil into a 5-quart oil pan noting its level for later reference, then install/fir the new (champion/dealer books shows top mark) to the exact level you drained from (oil to the very top but not overfilling, then reinstall cover and plug populsting them to prevent loss of fluid but not fully torquing them down). We should remove the o-ring seal from the differential side cover. For installation, clean the o-ring sealing surface on the Differential Cover (left) and on the differential housing; install a new o-ring seal to the Differential Cover (left), and attach the latter to the differential. Install the Differential Cover (left) retaining bolts and fasten them to 25 n.m (18 lb ft). Use the two nuts on the stud to attach the transmission mounting stud onto the Differential Cover (left) and tighten to 42n.m (31 lb ft), then remove the second nut. Tighten the nut holding the transmission to stud lh transmission mounting to 50 n.m (37 lb ft). Reinstall the damper/tuned absorber to the Differential Cover (left) and bolt it to 25 n.m (18 lb ft). Top off the differential with the right fluids up to the right level before reinstalling the lh Muffler assembly, lh wheel drive shaft, and lh rear tire and wheel assembly before lowering the vehicle.
Related 2008 Chevrolet Corvette Parts
2008 Chevrolet Corvette Differential
2008 Chevrolet Corvette Differential Bearing
2008 Chevrolet Corvette Pinion Bearing
2008 Chevrolet Corvette Wheel Seal