Make sure this part fits

GM 19209193
Master Cylinder

2005-2008 GM

Customer Questions & Expert Answers (8)
GM 19209193 Master Cylinder
  • Part Description
    Cylinder, Brake Master Cylinder
  • Replaces
    15189238
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2007 Buick TerrazaCX, CXL6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    2005-2008 Chevrolet UplanderBase, LS, LT6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    2005-2006 Pontiac MontanaSV66 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
    2005-2007 Saturn Relay1, 2, 36 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 19209193 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19209193 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after the fluid flows freely for the 2005 Buick Terraza? Posted by Customer
    A:
    Remove the transparent hoses from the reservoir, reinstall the master cylinder reservoir cap and diaphragm, and then remove the fittings with the hoses from the ports.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Master Cylinder
    Q:
    What is the final step in the process for the 2005 Buick Terraza? Posted by Customer
    A:
    Reconnect the electrical connector to the brake fluid level sensor and bleed the hydraulic brake system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Master Cylinder
    Q:
    What should be observed while depressing the primary piston for the 2006 Buick Terraza? Posted by Customer
    A:
    Observe the fluid flow from the ports; as air is bled from the pistons, the effort to depress the primary piston will increase and its travel will decrease.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Master Cylinder
    Q:
    What is the procedure after installing the master cylinder for the 2006 Chevrolet Uplander? Posted by Customer
    A:
    Remove the plugs from the brake pipes and connect them to the master cylinder, tightening the fittings to 32 Nm (24 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Master Cylinder
    Q:
    What is the final step in the process for the 2007 Buick Terraza? Posted by Customer
    A:
    Reconnect the electrical connector to the brake fluid level sensor and bleed the hydraulic brake system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Master Cylinder
    Q:
    What is the final step in the process for the 2008 Chevrolet Uplander? Posted by Customer
    A:
    Bleed the hydraulic brake system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Master Cylinder
    Q:
    What should be done after removing the primary piston assembly for the 2005 Chevrolet Uplander? Posted by Customer
    A:
    Plug the cylinder inlet ports and the rear outlet port, then apply low pressure, non-lubricated, filtered air into the front outlet port to remove the secondary piston along with the primary and secondary seals and the return spring.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Master Cylinder
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Master Cylinder 19209193 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19209193 Master Cylinder is available in the market under the name GM Brake Master Cylinder. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19209193 Master Cylinder fits certain Chevrolet Uplander models, as well as Buick Terraza. Additionally, it is compatible with Pontiac Montana and Saturn Relay models.
The original GM component designated by manufacturer part number 19209193 maintains top performance when functioning as the Cylinder, Brake Master Cylinder unit. The component 19209193 is constructed from durable material and its dimensions span 9.8 x 7.4 x 9.5 inches while weighing 1.90 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Brake Master Cylinder. The part 19209193 has available replacement options 15189238. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.