Make sure this part fits

GM 24263807
Slave Cylinder

Name: GM 24263807
Brand: GM
SKU: 24263807
Price: 188.42 USD
Availability: InStock

2004-2012 GM

Customer Questions & Expert Answers (9)

Part Description
Cylinder, Clutch Actuator; Clutch Slave Cylinder
Replaces
24235357, 24249144, 12588219
Manufacturer
General Motors

Make sure this part fits

$188.42 MSRP: $296.47

You Save: $108.05 (37%)

Ships in 1-3 Business Days

ADD TO CART

Product Specifications
Vehicle Fitment
Customer Questions & Expert Answers

Product Specifications

Brand	Genuine GM
Manufacturer Part Number	24263807
Part Description	Cylinder, Clutch Actuator; Clutch Slave Cylinder
Other Names	Release Bearing Assembly; Cylinder, Clutch Hydraulic Release Slave/Actuator; Cylinder, Clutch Hydraulic Release Slave
Item Dimensions	6.4 x 4.5 x 12.1 inches
Item Weight	2.10 Pounds
Condition	New
Fitment Type	Direct Replacement
Replaces	24235357, 24249144, 12588219
Manufacturer	General Motors
SKU	24263807
Warranty	This genuine GM part is guaranteed by GM's factory warranty.
Shipping & Return	Shipping Policy Return Policy

Warning: California's Proposition 65

Vehicle Fitment

Year Make Model	Trim	Engine
2004-2005 Chevrolet Blazer	Base, LS, Xtreme, ZR2	6 Cyl 4.3 L GAS
2004-2012 Chevrolet Colorado	Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS	4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
2004-2012 GMC Canyon	SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE	4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
2006-2010 Hummer H3	Alpha, Base, Championship Series, X	5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
2009-2010 Hummer H3T	Alpha, Base	5 Cyl 3.7 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS

Customer Questions & Expert Answers
Q:
Can you help me check if this 24263807 is the right part for my car? Posted by ChevyPartsGiant Specialist
A:
Please Select Your Vehicle model to see if part number 24263807 is suitable before ordering.
Posted by ChevyPartsGiant Specialist
Q:
How to service and repair the Clutch Slave Cylinder on Chevrolet Blazer? Posted by Customer
A:
Service and repair operations of the Clutch Slave Cylinder need transmission removal as a first step. Start by removing the clutch housing's 2 bolts which secure the concentric slave cylinder after pulling it loose from the transmission input shaft. The bearing inside the slave cylinder is removable when replacement becomes necessary. When installing the slave cylinder position it directly on the gearbox input shaft while facing the bleed screw and coupling toward the transmission positions. Complete the installation by inserting the 2 bolts into the concentric slave cylinder to the clutch housing before torqueing them to 8 nm (71 inch lbs.), then return the transmission.
Posted by ChevyPartsGiant Specialist
Q:
How to replace the Clutch Slave Cylinder on Chevrolet Colorado? Posted by Customer
A:
The donor procedure of replacing the clutch actuator cylinder starts with the removal of the transmission in both the rwd and 4wd configurations. Then remove the 2 clutch actuator cylinder bolts and peel the clutch actuator cylinder off the input shaft bearing retainer . For installing, place the clutch actuator cylinder onto the input shaft bearing retainer and make sure to observe the fasteners notice for appropriate handling ability. Apply the 2 clutch actuator cylinder bolts - tighten them to 8 n.m (71 lb in). Finally, re-install the transmission for rwd and for 4wd.
Posted by ChevyPartsGiant Specialist
Q:
How to Service and Repair the Clutch Slave Cylinder on Chevrolet Colorado? Posted by Customer
A:
To replace the clutch actuator cylinder, it is necessary to remove the transmission from both 4wd as well as rwd. Next, remove the 2 clutch actuator cylinder bolts and detach the clutch actuator cylinder from the input shaft bearing retainer . For installation, locate the clutch actuator cylinder onto the input shaft bearing retainer and follow fastener precautions to avoid vehicle damage. Next, install the two clutch actuator cylinder bolts and tighten them to the 8 nm (71 lb in). Finally, reinstall both 4wd and rwd configurations.
Posted by ChevyPartsGiant Specialist
Q:
How to Service and Repair the Clutch Slave Cylinder on GMC Canyon? Posted by Customer
A:
The replacement process for the clutch actuator cylinder begins with transmission removal from vehicles using 4wd and rwd systems. Remove the two clutch actuator cylinder bolts and separate the clutch actuator cylinder from its position on the input shaft bearing retainer. After positioning the clutch actuator cylinder on the input shaft bearing retainer follow fastener precautions to protect the vehicle from damage. Fasten the 2 clutch actuator cylinder bolts using a torque setting of 8 nm (71 lb in). Put back in the transmission during the installation of both rwd and 4wd systems.
Posted by ChevyPartsGiant Specialist
Q:
How to replace the Clutch Slave Cylinder on GMC Canyon? Posted by Customer
A:
The procedure starts with transmission removal before reinstallation. You will start by removing 2 clutch actuator cylinder bolts before removing the clutch actuator cylinder from the input shaft bearing retainer. When installing the clutch actuator cylinder position it onto the input shaft bearing retainer while strictly following the fastener notice for adequate handling. Per the procedure, apply 8 n.m torque (71 lb in) to the 2 clutch actuator cylinder bolts before bolting them back in. Finally, reinstall the transmission.
Posted by ChevyPartsGiant Specialist
Q:
How do you secure the concentric actuator cylinder for the 2005 Chevrolet Blazer? Posted by Customer
A:
Secure it to the clutch housing with the 2 bolts, tightening them to 8 Nm (71 inch lbs.).
Posted by ChevyPartsGiant Specialist
See expert answers on similar Clutch Slave Cylinder
Q:
How do you install the clutch actuator cylinder for the 2007 Chevrolet Colorado? Posted by Customer
A:
Position the clutch actuator cylinder onto the input shaft bearing retainer, ensuring to follow the Fastener Notice.
Posted by ChevyPartsGiant Specialist
See expert answers on similar Clutch Slave Cylinder
Q:
How do you secure the clutch actuator cylinder during installation for the 2006 Chevrolet Colorado? Posted by Customer
A:
Install the 2 clutch actuator cylinder bolts and tighten them to 8 Nm (71 inch lbs.).
Posted by ChevyPartsGiant Specialist
See expert answers on similar Clutch Slave Cylinder
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 24263807, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 24263807 Slave Cylinder. It is sometimes referred to as GM Clutch Slave Cylinder. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 24263807 Slave Cylinder. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.