Make sure this part fits

GM 88899011
Lap & Shoulder Belt, Gray, Driver Side

2000-2004 GM

Customer Questions & Expert Answers (12)
GM 88899011 Lap & Shoulder Belt, Gray, Driver Side
  • Part Description
    Belt Kit, Seat Belt
  • Position
    Driver Side
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number88899011
    Part DescriptionBelt Kit, Seat Belt
    Other NamesBelt & Retractor
    Item Dimensions10.1 x 5.5 x 5.4 inches
    Item Weight3.10 Pounds
    PositionDriver Side
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU88899011
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2000-2004 Buick CenturyCustom, Limited6 Cyl 3.1 L GAS
    2000-2004 Buick RegalGS, GSE, LS, LSE6 Cyl 3.8 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is 88899011 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 88899011 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step to service the center rear seat belt for the 2002 Buick Regal? Posted by Customer
    A:
    First, remove the rear seat cushion.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    Which seat belt systems need to be replaced for the 2004 Buick Century? Posted by Customer
    A:
    This includes systems used by adults, child restraints, infant carriers, booster seats, LATCH system, and top tether anchorages.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What should be ensured during the installation of the center seat belts for the 2004 Buick Century? Posted by Customer
    A:
    Ensure that the rear seat belt anchors are oriented correctly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What is the first step to replace the center rear seat belt for the 2003 Buick Century? Posted by Customer
    A:
    Remove the rear seat cushion.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What should be done after removing the rear seat cushion for the 2001 Buick Century? Posted by Customer
    A:
    Take out the center seat belt nuts and remove the center seat belts from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    How should the center seat belts be secured during installation for the 2000 Buick Century? Posted by Customer
    A:
    Install the center seat belts back into the vehicle and secure them with the center seat belt nuts, tightening them to 42 N.m (31 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What should be done after securing the seat belt for the 2002 Buick Century? Posted by Customer
    A:
    Reinstall the front seat.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What tool is needed to drill out the rivet that retains the seat belt for the 2003 Buick Regal? Posted by Customer
    A:
    A 1/4 inch (6.35 mm) drill bit.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What is the final step in securing the seat belt for the 2004 Buick Regal? Posted by Customer
    A:
    Install a new rivet to the rear of the front seat track.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    Why is it important to inspect and repair the seat belt system after a collision for the 2002 Buick Regal? Posted by Customer
    A:
    It is crucial to ensure safety.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What size drill bit should be used to drill out the rivet for the 2000 Buick Regal? Posted by Customer
    A:
    Use a 1/4 inch (6.35 mm) drill bit.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 88899011, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 88899011 Lap & Shoulder Belt, Gray, Driver Side. It is sometimes referred to as GM Seat Belt. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 88899011 Lap & Shoulder Belt, Gray, Driver Side. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Buick parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery