Other Name: Belt Kit, Az3 - Front Split Bench; Belt & Retractor; Belt Kit, At5 - Rear Center Folding Seat; Belt Kit, Ae7 - Front Split Bench; Belt Kit,Seat Belt
Position: Front Driver Side
Replaces: 19151437, 19178417
Fits the following Chevrolet Models:
Silverado 1500 | 2007-2011 | Hybrid, LS, LT, LTZ, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
Q: How to replace the center rear seat belt in a crew cab on Chevrolet Colorado?
A: Beginning the seat belt replacement in crew cabs requires initial removal of both the rear seat shoulder belt guide cover together with the body rear trim panel. The next step involves bolting out the reinforcement point which connects the rear center seat belt assembly with the floor panel before you can remove the assembly from the vehicle. The rear center seat belt assembly must be placed on the floor panel before installing the bolt while tightening it to 52.5 N.m (39 lb ft). The rear center seat belt webbing should pass through the guide loop without creating a twist before proceeding. The final steps involve putting back the rear body trim panel combined with the rear seat shoulder belt guide cover.
Q: How to replace the rear seat belt on Chevrolet Malibu?
A: The first step to replace the rear seat belt involves removing the rear seat belt upper guide shoulder bolt combined with removing the rear quarter upper trim from the left or right side. The sequence of repair begins with removal of the lower seat belt anchor bolt cover then the rear seat belt floor anchor bolt followed by stripping off the rear quarter lower trim from the identical side. Remove the automotive assembly of the rear seat belt retractor by detaching the bolt which connects to the vehicle body. The rear seat belt retractor assembly installation begins by positioning the components followed by bolt attachment to the body structure while tightening them to 70 N.m (52 lb ft). Secure the rear quarter lower trim after you place the rear seat belt floor anchor bolt in position while making sure the seat belt webbing remains untwisted and tightening it to 70 N.m (52 lb ft). First install the anchor bolt cover and after that add the rear quarter upper trim. The rear seat belt upper guide should be fastened using the bolt while nogently twisting the webbing before the bolt is tightened to 70 N.m (52 lb ft).
Q: How to replace the center rear seat belt in a crew cab on Chevrolet S10?
A: A Crew Cab requires two steps to replace the center rear seat belt: start by disassembling the 2 floor bolts which secure the rear seat bottom cushion followed by easing back the rear seat cushion ears to release retainer brackets from the rear seat back mounting bracket before taking out the rear seat bottom cushion. Remove the center rear seat belt assembly retaining nuts first and then take out both the assembly and the retaining nuts from the vehicle. Place the center rear seat belt assembly into the vehicle space before securing it with retaining nuts which should be tightened to 80 N.m (59 lb ft). Attach the rear seat bottom cushion by inserting its frame edges into the tabs on the rear seat back mounting bracket and tighten 2 bolts to 25 N.m (18 lb ft). The last step involves placing rear seat bottom cushion ear retainers into their mount points in the rear seat back mounting bracket.