How to replace the front seat belt on Chevrolet S10?

Beginning the front seat belt replacement requires removing the bolt that holds the lower seat belt anchor plate to the vehicle. A flat-bladed tool enables the opening of the upper seat belt anchor plate cover while a bolt must be removed from the upper plate to complete the disassembly. Move the seat belt by opening an entry on the body side trim cover before removing the body side trim panel. The seat belt retractor assembly can be removed from the vehicle after removing its bolt which holds it in place. Secure the seat belt retractor assembly to the vehicle by using a bolt which should be tightened to 70 N.m (52 lb ft). Insert the seat belt by guiding it through the opening present in the body side trim cover. Afterward, replace the body side trim panel. Squeeze the seat belt opening trim cover tightly before adding the upper seat belt anchor plate along with its bolt which needs a torque of 70 N.m (52 lb ft). Perform the following sequence: Cover the upper seat belt anchor plate, fasten the lower plate with its bolt and tighten the bolt to 70 N.m (52 lb ft).

How to service the front seat belt on Chevrolet S10?

The front seat belt servicing requires detaching the bolt between the lower seat belt anchor plate and the vehicle. An appropriate flat-bladed tool helps open the upper seat belt anchor plate cover while you should remove the bolt that maintains both upper and lower seat belt anchor plates. After removing the body side trim panel you should route the seat belt to pass through the opening located in the body side trim cover. First disconnect the bolt which attaches the seat belt retractor assembly to the vehicle before removing the assembly. The seat belt retractor assembly installation begins with placing it into position in the vehicle followed by bolt tightening to 70 N.m (52 lb ft). Feed the seat belt strap through body side trim cover opening before putting back body side trim panel. The seat belt opening trim must be firmly set before adding the upper seat belt anchor plate and bolt which requires 70 N.m (52 lb ft) of torque. Quench the upper seat belt anchor plate cover after applying the lower seat belt anchor plate and bolt which requires a torque of 70 N.m (52 lb ft).

OEM Chevrolet S10 Seat Belt

Seat Safety Belt

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

54 Seat Belts found

View related parts
Chevrolet S10 Buckle End, Passenger Side Part Number: 12474640
$71.61 MSRP: $106.59
You Save: $34.98 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt Kit, Passenger Seat (Buckle Side) *Graphite; Outer Buckle; Latch; Belt Kit for An3, Av5, Am6 Front Seats (High Back Reclining/Split Bench)
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2001 Chevrolet S10 | Base, LS, Xtreme, ZR2 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Lap Belt, Front Part Number: 12477769
$15.55 MSRP: $23.14
You Save: $7.59 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt Kit, A52- Front Bench; Center Belt Assembly; Belt Kit, A52 - Front Bench
- Position: Front
- Replaces: 12376946
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-1999 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2 | 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Outer Buckle Part Number: 88956066
$49.24 MSRP: $99.30
You Save: $50.06 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt Kit, Rear Seat (Buckle Side) *Graphite *Graphite; Latch
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2004 Chevrolet S10 | Base, LS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Outer Buckle, Front Part Number: 12474641
$13.56 MSRP: $20.19
You Save: $6.63 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt Kit, Am6- Front Split Bench; Buckle; Latch; Belt Kit, An3 - Front Bucket Seat; Av5 - Front High Back Bucket; Am6 - Front Split Bench
- Position: Front
- Replaces: 12474642
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2001 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Lap Belt, Front Part Number: 12477773
$14.31 MSRP: $16.67
You Save: $2.36 (15%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt Kit, Am6- Front Split Bench
- Position: Front
- Replaces: 12376987
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2004 Chevrolet S10 | Base, LS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Lap & Shoulder Belt, Front Passenger Side Part Number: 12380608
$39.42 MSRP: $70.00
You Save: $30.58 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt Kit, A52- Front Bench; Seat Belt Assembly; Center Seat Belt; Belt Kit, Am6 - Front Split Bench; Belt Kit, A52 - Front Bench
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1997 Chevrolet S10 | Base, LS, SS, ZR2 | 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Buckle End Part Number: 88951000
Product Specifications
- Other Name: Belt Kit, Driver Seat (Buckle Side) *Graphite; Outer Buckle; Buckle; Latch
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2004 Chevrolet S10 | Base, LS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Lap & Shoulder Belt Part Number: 89023933
Product Specifications
- Other Name: Belt Kit, Passenger Seat (Retractor Side) *Graphite *Graphite; Seat Belt Assembly; Belt & Retractor; Kits for An3, Am6, A52, Rear Jump Seat.
- Position: Passenger Side
- Replaces: 12470354, 12474110, 12477759, 88955921, 88898882
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004 Chevrolet S10 | LS, ZR5 | 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Lap & Shoulder Belt, Front Driver Side Part Number: 88898871
$114.83 MSRP: $171.68
You Save: $56.85 (34%)
Product Specifications
- Other Name: Belt Kit, Am6- Front Split Bench; Seat Belt Assembly; Front High Back Bucket, Rear Jump Seat, Typhoon, Seat Belt Kit.
- Position: Front Driver Side
- Replaces: 12477579, 88934657
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-1999 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2 | 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Lap & Shoulder Belt, Front Driver Side Part Number: 12375440
Product Specifications
- Other Name: Belt Kit, A52- Front Bench; Seat Belt Assembly; Av5 - Front High Back Bucket; Am6 - Front Split Bench; A52 - Front Bench
- Position: Front Driver Side
- Replaces: 12387484, 12383020, 12380584, 12381818, 12383010
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1997 Chevrolet S10 | Base, LS, SS, ZR2 | 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Lap & Shoulder Belt, Driver Side Part Number: 12381703
Product Specifications
- Other Name: Belt Kit, Driver Seat (Retractor Side) Graphite; Seat Belt Assembly; Belt Kit, Av5 - Front High Back Bucket
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994 Chevrolet S10 | Base, LS, SS, ZR2 | 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Belt, Driver Side Part Number: 15536106
Product Specifications
- Other Name: Belt Assembly, Passenger Seat
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-1990 Chevrolet S10 | Base, Durango, Sport, Tahoe | 4 Cyl 1.9 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Belt, Passenger Side Part Number: 15536108
Product Specifications
- Other Name: Belt Assembly, Passenger Seat Shoulder
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-1990 Chevrolet S10 | Base, Durango, Sport, Tahoe | 4 Cyl 1.9 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Lap & Shoulder Belt, Passenger Side Part Number: 15578869
Product Specifications
- Other Name: Belt Unit; Seat Belt Assembly
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1993 Chevrolet S10 | Baja, Base, EL, Tahoe | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Buckle Part Number: 88951010
Product Specifications
- Other Name: Belt Kit, A52- Front Bench; Latch; Belt Kit, A52 - Front Bench
- Position: Front Center
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2003 Chevrolet S10 | Base, LS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Buckle End, Driver Side Part Number: 12474639
Product Specifications
- Other Name: Belt Kit, Driver Seat (Buckle Side) *Graphite; Outer Buckle; Latch; Belt Kit, An3 - Front Bucket Seat; Av5 - Front High Back Bucket; Am6 - Front Split Bench
- Position: Driver Side
- Replaces: 12470428
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2001 Chevrolet S10 | Base, LS, Xtreme, ZR2 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Lap Belt, Front Part Number: 12477772
Product Specifications
- Other Name: Belt Kit, Am6- Front Split Bench; Center Belt Assembly; Belt Kit, Am6 - Front Split Bench
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998 Chevrolet S10 | Base, LS, SS, ZR2 | 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Lap & Shoulder Belt Part Number: 12375439
Product Specifications
- Other Name: Belt Kit, Driver Seat *Graphite; Seat Belt Assembly; Av5 - Front High Back Bucket; Am6 - Front Split Bench; A52 - Front Bench
- Position: Driver Side
- Replaces: 12387483, 12381817, 12383009, 12383019
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1997 Chevrolet S10 | Base, LS, SS, ZR2 | 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Lap & Shoulder Belt, Passenger Side Part Number: 12381704
Product Specifications
- Other Name: Belt Kit, Passenger Seat (Retractor Side) Graphite; Seat Belt Assembly; Belt Kit, Av5 - Front High Back Bucket
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994 Chevrolet S10 | Base, LS, SS, ZR2 | 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Lap & Shoulder Belt, Passenger Side Part Number: 12381712
Product Specifications
- Other Name: Belt Kit, Passenger Seat (Retractor Side) Graphite; Seat Belt Assembly; Belt Kit, Av5 - Front High Back Bucket; Belt Kit, A52 - Front Bench
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994 Chevrolet S10 | Base, LS, SS, ZR2 | 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS

| Page 1 of 3 |Next >

1-20 of 54 Results

Chevrolet S10 Seat Belt

Want to cut long-term maintenance and repair costs? Choose OEM Seat Belt. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet S10 parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet S10 Seat Belt includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Chevrolet S10 Seat Belt Parts and Q&A

Outer Buckle
88956066
Q: How to replace the front seat belt on Chevrolet S10?
A:
Beginning the front seat belt replacement requires removing the bolt that holds the lower seat belt anchor plate to the vehicle. A flat-bladed tool enables the opening of the upper seat belt anchor plate cover while a bolt must be removed from the upper plate to complete the disassembly. Move the seat belt by opening an entry on the body side trim cover before removing the body side trim panel. The seat belt retractor assembly can be removed from the vehicle after removing its bolt which holds it in place. Secure the seat belt retractor assembly to the vehicle by using a bolt which should be tightened to 70 N.m (52 lb ft). Insert the seat belt by guiding it through the opening present in the body side trim cover. Afterward, replace the body side trim panel. Squeeze the seat belt opening trim cover tightly before adding the upper seat belt anchor plate along with its bolt which needs a torque of 70 N.m (52 lb ft). Perform the following sequence: Cover the upper seat belt anchor plate, fasten the lower plate with its bolt and tighten the bolt to 70 N.m (52 lb ft).
Center Seat Belt, Front Driver Side
12477774
Q: How to service the front seat belt on Chevrolet S10?
A:
The front seat belt servicing requires detaching the bolt between the lower seat belt anchor plate and the vehicle. An appropriate flat-bladed tool helps open the upper seat belt anchor plate cover while you should remove the bolt that maintains both upper and lower seat belt anchor plates. After removing the body side trim panel you should route the seat belt to pass through the opening located in the body side trim cover. First disconnect the bolt which attaches the seat belt retractor assembly to the vehicle before removing the assembly. The seat belt retractor assembly installation begins with placing it into position in the vehicle followed by bolt tightening to 70 N.m (52 lb ft). Feed the seat belt strap through body side trim cover opening before putting back body side trim panel. The seat belt opening trim must be firmly set before adding the upper seat belt anchor plate and bolt which requires 70 N.m (52 lb ft) of torque. Quench the upper seat belt anchor plate cover after applying the lower seat belt anchor plate and bolt which requires a torque of 70 N.m (52 lb ft).