Make sure this part fits

GM 88951000
Buckle End

2002-2005 GM

Customer Questions & Expert Answers (11)
GM 88951000 Buckle End
GM 88951000 Buckle End
  • Part Description
    Belt Kit, Driver Seat (Buckle Side) *Graphite
  • Position
    Driver Side
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number88951000
    Part DescriptionBelt Kit, Driver Seat (Buckle Side) *Graphite
    Other NamesOuter Buckle; Buckle; Latch
    Item Dimensions11.6 x 2.7 x 1.9 inches
    Item Weight1.00 Pounds
    PositionDriver Side
    ConditionNew
    ManufacturerGeneral Motors
    SKU88951000
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2005 Chevrolet BlazerBase, LS, Xtreme, ZR26 Cyl 4.3 L GAS
    2002-2004 Chevrolet S10Base, LS, Xtreme, ZR2, ZR54 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    2002-2004 GMC SonomaSL, SLS4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    2002-2004 Oldsmobile BravadaBase6 Cyl 4.2 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is 88951000 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 88951000 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    When must a seat belt system be replaced for the 2004 Chevrolet Blazer? Posted by Customer
    A:
    Any seat belt system in use during a collision serious enough to deploy automatic restraint devices, such as air bags and seat belt pretensioners, must be replaced.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What should be done after removing the rear seat assembly for the 2004 Chevrolet Blazer? Posted by Customer
    A:
    Take off the lower seat belt anchor plate from the rear seat bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What is the next step after reinstalling the body side trim panel for the 2005 Chevrolet Blazer? Posted by Customer
    A:
    Attach the upper seat belt anchor plate and bolt to the vehicle, tightening the bolt to 70 N.m (52 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What is the process for reinstalling the rear seat bottom cushion for the 2002 Chevrolet S10? Posted by Customer
    A:
    Reinstall the rear seat bottom cushion, ensuring the frame engages with the tabs on the rear seat back mounting bracket, and secure it with the 2 bolts, tightening them to 25 N.m (18 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What should you do after installing the center rear seat belt assembly for the 2003 Chevrolet S10? Posted by Customer
    A:
    Reinstall the rear seat bottom cushion, ensuring the frame engages in the tabs on the rear seat back mounting bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    How do you install the new seat belt retractor assembly for the 2004 Chevrolet S10? Posted by Customer
    A:
    Position the seat belt retractor assembly back into the vehicle and secure it with the bolt, tightening it to 70 N.m (52 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What should you ensure while securing the center rear seat belt assembly for the 2002 Chevrolet S10? Posted by Customer
    A:
    Ensure to follow the Fastener Notice in Service Precautions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What is the first step in removing the jump seat seat belt for the 2003 Chevrolet S10? Posted by Customer
    A:
    Remove the retaining bolt and the seat belt itself.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    How do you access the upper seat belt anchor plate for the 2003 GMC Sonoma? Posted by Customer
    A:
    Carefully pry open the upper seat belt anchor plate cover with a flat-bladed tool and remove the bolt retaining the upper seat belt anchor plate.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    How do you access the upper seat belt anchor plate for the 2004 GMC Sonoma? Posted by Customer
    A:
    Carefully pry open the upper seat belt anchor plate cover using a flat-bladed tool, then remove the bolt that secures the upper seat belt anchor plate.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 88951000, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 88951000 Buckle End. It is sometimes referred to as GM Seat Belt. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 88951000 Buckle End. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery