How to replace the engine oil pressure switch on Chevrolet S10?

To change the engine Oil Pressure Switch first, you will need to gather the tools such as: Oil Pressure Switch socket (J 41712). Start by cleaning the surrounding of the switch and Distributor to avoid debris from getting in the engine. Unplug the connector for the engine Oil Pressure Switch, and then remove the Distributor from the system. Remove the engine Oil Pressure Switch using the Oil Pressure Switch socket (J 41712) and remember the alignment in the fitting before removing. If necessary, take off the engine Oil Pressure Switch fitting. Seal the threads of the fitting or the engine Oil Pressure Switch using sealant gm p/n 12346004 or equivalent. In case the fitting had been taken off, reinstall it and tighten it to 15 nm (11 ft. Lbs.). Next, install the engine Oil Pressure Switch and tighten using the Oil Pressure Switch socket (J 41712) into a torque of 30 nm (22 ft. Lbs). The engine Oil Pressure Switch electrical connector should be reconnected, the Distributor should be reinstalled back on, and at last, the engine oil level should be checked and adjusted.

OEM Chevrolet S10 Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Oil Pressure Switches found

View related parts
Chevrolet S10 Oil Pressure Sensor
Part Number: 19244501
$62.86 MSRP: $107.02
You Save: $44.16 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Fuel Pump & Engine Oil Pressure Indicator; Oil Pressure Switch; Oil Pressure Sending Unit; Engine Oil Pressure/Temperature Sensor; Fuel Pump Pressure Switch
- Replaces: 10243574, 12555492
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1994 Chevrolet S10 | Base, EL, LS, SS, Tahoe, ZR2 | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Oil Pressure Sending Unit
Part Number: 14073454
$34.16 MSRP: $106.60
You Save: $72.44 (68%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Engine Oil Pressure/Temperature; Oil Pressure Switch; Sender, Engine Oil Pressure/Temperature; Sender, Oil Pressure Or Temperature
- Replaces: 10137603, 15564999
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1986-1988 Chevrolet S10 | Base, Durango, Sport, Tahoe | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS
View related parts
Chevrolet S10 Oil Pressure Sending Unit
Part Number: 12562571
$63.47 MSRP: $109.00
You Save: $45.53 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Fuel Pump Pressure; Oil Pressure Switch; Sensor, Engine Oil Pressure/Temperature
- Replaces: 12562266, 10240133
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2003 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Oil Pressure Sensor
Part Number: 19244500
$74.20 MSRP: $126.34
You Save: $52.14 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Fuel Pump Pressure; Oil Pressure Switch; Pressure Sensor; Oil Pressure Sending Unit; Sensor, Engine Oil Pressure/Temperature
- Replaces: 12553175, 12555534
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1996 Chevrolet S10 | Base, LS, SS, ZR2 | 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Oil Pressure Switch
Part Number: 19244515
Product Specifications
- Other Name: Switch Assembly, Fuel Pump & Engine Oil Pressure Indicator; Oil Pressure Sensor; Oil Pressure Sending Unit; Switch, Engine Oil Pressure/Temperature; Switch, Fuel Pump Pressure
- Replaces: 25036940
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-1990 Chevrolet S10 | Base, Durango, Sport, Tahoe | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Oil Pressure Sensor
Part Number: 19244497
Product Specifications
- Other Name: Sensor, Fuel Pump Pressure; Oil Pressure Switch; Oil Pressure Sending Unit; Sensor, Engine Oil Pressure/Temperature
- Replaces: 10201491
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1993 Chevrolet S10 | Base, EL, Tahoe | 6 Cyl 2.8 L GAS
View related parts
Chevrolet S10 Oil Pressure Switch
Part Number: 10002798
Product Specifications
- Other Name: Switch, Automatic Choke Control; Oil Pressure Sensor; Oil Pressure Sending Unit; Engine Oil Pressure/Temperature Switch; Electrical Switches
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991 Chevrolet S10 | Baja, Base, Tahoe | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Oil Pressure Switch
Part Number: 14014599
Product Specifications
- Other Name: Switch; Oil Pressure Sensor; Oil Pressure Sending Unit; Switch, Engine Oil Pressure/Temperature
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1989 Chevrolet S10 | Base, Durango, Sport, Tahoe | 4 Cyl 1.9 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS

Chevrolet S10 Oil Pressure Switch

Our website offers an extensive catalog of genuine Chevrolet S10 Oil Pressure Switch at unbeatable prices. Every OEM Chevrolet S10 Oil Pressure Switch comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet S10 Oil Pressure Switch Parts Questions & Experts Answers

Oil Pressure Sending Unit
12562571
Q: How to replace the engine oil pressure switch on Chevrolet S10?
A: To change the engine Oil Pressure Switch first, you will need to gather the tools such as: Oil Pressure Switch socket (J 41712). Start by cleaning the surrounding of the switch and Distributor to avoid debris from getting in the engine. Unplug the connector for the engine Oil Pressure Switch, and then remove the Distributor from the system. Remove the engine Oil Pressure Switch using the Oil Pressure Switch socket (J 41712) and remember the alignment in the fitting before removing. If necessary, take off the engine Oil Pressure Switch fitting. Seal the threads of the fitting or the engine Oil Pressure Switch using sealant gm p/n 12346004 or equivalent. In case the fitting had been taken off, reinstall it and tighten it to 15 nm (11 ft. Lbs.). Next, install the engine Oil Pressure Switch and tighten using the Oil Pressure Switch socket (J 41712) into a torque of 30 nm (22 ft. Lbs). The engine Oil Pressure Switch electrical connector should be reconnected, the Distributor should be reinstalled back on, and at last, the engine oil level should be checked and adjusted.

Related Chevrolet S10 Parts

Browse Chevrolet S10 Oil Pressure Switch by Years

2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 1989 1988 1987 1986 1985 1984