GM 84557894
Air Filter, Passenger Side

The windshield wipers must be positioned in the up position after turning off the ignition while they are at their desired location. Position the rear hood seal to half of its center area. You should extract the washer hose from the right panel of the air inlet grill and place it temporarily aside. Two push pin retainers should be removed from the right air inlet grill panel but retainers for the third position must stay in place. The left part of the right air inlet grill panel needs to be positioned on the windshield before the passenger compartment air filter and water deflector cover removal. The process begins by installing the passenger compartment air filter followed by the water deflector cover which should rest with its tabs attached to the rear cowl edge. Following the reinstallation of the air inlet grill panel apply the push pin retainers to secure it. Place the washer hose into its designated position under the right air inlet grill panel before fixing the rear hood seal. Close the hood before setting the windshield wipers to park position.

To replace the passenger compartment air filter, first bring the windshield wipers up by turning the ignition off when in the desired position. Move the rear hood seal half the way back to the center by opening the hood. Unclamp the washer hose from the right air inlet grill panel and keep it aside. Remove the 2 push pin retainers of the right air inlet grill panel without removing the third push pin retainer one. Position the left side of the right air inlet grill panel above the windscreen then you will have to remove the water deflector cover and the passenger compartment air filter. Installation includes installing the new passenger compartment air filter, then install the water deflector cover and ensuring the three tabs hook onto the rear cowl edge. Replace the air inlet grill panel and fix it with the help of the push pin retainers. Move the washer hose into the right air inlet grill panel clips, install the rear panel seal, and at last, put the windshield wipers back in the park insights.

The first step to replace the passenger compartment air filter begins by setting the wipers to their up position using the ignition off function at the appropriate spot. Open the hood then take out the rear hood seal. Detach the washer hose from its position on the right air inlet grill panel then place it aside. The two push pin retainers on the right air inlet grill panel should be removed but the third push pin retainer must stay put. After fitting the left side of the right air inlet grill panel onto the windshield remove the water deflector cover and the passenger compartment air filter. Place the new passenger compartment air filter first then install the water deflector cover while making sure the three tabs fit correctly on the rear edge of the cowl. Replace the air inlet grill panel by inserting the push pin retainers across the panel. Put the washer hose into right air inlet grill panel clips while installing the rear hood seal and fixing the Windshield Wiper in park position after closing the hood and completing the reinstallation procedure.

Take out the passenger compartment air filter.

Close the hood and return the windshield wipers to the PARK position.

Place the new passenger compartment air filter in position, followed by the left side of the right air inlet grill panel.

Place the new passenger compartment air filter in position, then install the water deflector cover, ensuring the three tabs engage the rear cowl edge.